Skip to content
Australia's Largest Hobby Retailer

Brushless ESCs

ABSIMA 1/10 Brushless ESC & Motor Combo Thurst BL ABSIMA 1/10 Brushless ESC & Motor Combo Thurst BL
$129.99
Available to order

Description

The Brushless Combo Set Thrust BL ECO 1:10 is primarily aimed for the owners of 1:10 Ready Set vehicles or KIT vehicles that want to make simple adjustments to increase their racer performance. The set includes the brushless high-performance motor with aluminum housing and the matching speed controller. The system is designed without sensor cable, allowing a particularly easy handling. 
 
Complete sensorless brushless set - ready to use.
Including gold-bonded plug system and t-plug battery connection.
 
New Features

  • Programmable (running mode; drag brake force; voltage cut-off; punch; maximum brake force)
  • 50A continuous amp
  • Battery: 4-9 cells NiMH / 2-3S LiPo

Brushless ESC Features:

  • Waterproof 50A ESC incl. cooler
  • Running mode: forward/brake/reverse or forward/reverse (programmable)
  • LiPo cut-off: non-protection / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V (programmable)
  • Overheat protection
  • Peak amps: 300A
  • BEC: 6V / 3A (switch mode)
  • Battery: 4-9 cells NiMH / 2-3S LiPo
  • Motor limit @ 2S: 8T on-road / 11T off-road
  • Motor limit @ 3S: 11T on-road / 14T off-road
  • Drag brake: 0% - 40% (programmable)
  • Start mode: Level 1 soft - Level 4 very aggressive (programmable)
  • Maximum brake force: 25% - 100% (programmable)
  • Motor timing: 18.75 
  • Size: 48,5x38x32 mm
  • Weight incl. cable : 90g

Brushless Motor Features:

  •  3421KV
  • 27.368 RPM/min @ 7.4 Volt
  • 4 Pole
  • Battery type: 4-9 cells NiMH / 2-3S LiPo
  • Size: 540
  • Length: : 52.0mm
  • Ø w/o fins: 36mm
  • Shaft length : 14,5mm
  • Ø shaft : 3,175 mm
  • Weight: : 199g
Absima 1/10 Brushless Motor Thrust BL 10T Absima 1/10 Brushless Motor Thrust BL 10T
$99.99
Available to order
Absima 1/10 Brushless Motor Thrust BL 10T
Absima Brushless ESC A10 80A Thrust 1/10 AB2110001 Absima Brushless ESC A10 80A Thrust 1/10 AB2110001
$109.99
Available to order
Absima Brushless ESC A10 80A Thrust 1/10
Alturn USA 70 AMP Brushless ESC - Aircraft Alturn USA 70 AMP Brushless ESC - Aircraft
$69.99
Available to order

70A BRUSHLESS SPEED CONTROL W/ HEAT SINK

Arrowind 80A ESC + 17T 1/8 Brushless Combo AWD-8013 Arrowind 80A ESC + 17T 1/8 Brushless Combo AWD-8013
$129.99
In stock
Arrowind 80A ESC + 17T 1/8 Brushless Combo
Arrowind Brushless Combo 60W Esc + 13T 540 Motor Arrowind Brushless Combo 60W Esc + 13T 540 Motor
$119.99
Available to order
Arrowind Brushless Combo 60W Esc + 13T 540 Motor
Black Magic 4 Poles Combo 60A ESC + 4350KV + Card BM-4PSL-C561 Black Magic 4 Poles Combo 60A ESC + 4350KV + Card BM-4PSL-C561
$169.99
In stock

Description

Black Magic 1/10 Scale 60A ESC + 4350Kv Brushless Motor / ESC Combo BM-4PSL-C561 
This is a 4 pole 4350kv Brushless motor and 60 Amp Brushless ESC 
Perfect for any 1/10th Scale Car, Truck, or Buggy 
4-10 cell Nimh 
2-3 cell Lipo

Black Magic 4 Poles Combo Motor 4074 2150KV ESC150A BM-4PSL-C7151 Black Magic 4 Poles Combo Motor 4074 2150KV ESC150A BM-4PSL-C7151
$329.00
In stock

Description

Black Magic 4 Poles Combo Motor 4074 2150KV + ESC 150A + Card w/ Waterproof Structure


 

Black

 
Black Magic 60A ESC Fitable For 4 Poles SL Motor Black Magic 60A ESC Fitable For 4 Poles SL Motor
$86.99
Available to order
Black Magic 60A ESC Fitable For 4 Poles SL Motor
Castle Creations 1/8 Mamba Monster 2 ESC Motor Combo CC-MM2-COMBO2650 Castle Creations 1/8 Mamba Monster 2 ESC Motor Combo CC-MM2-COMBO2650
$429.99
Available to order

Description

Mamba Monster 2 is intended for on-road, buggies, truggies and monster trucks running up to 6S LiPo and tipping the scales at up to 15lbs. The innovative new case allows for fan changes, if necessary. Solder posts now permit users to change battery wire length and direction as needed.

As always, the Mamba Monster 2 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (free with included coupon). Remember, the fan is not water proof, so users need to remove the fan before they head out into wet conditions.

Legal mumbo jumbo that we need you to read:
Although Monster 2 and Castle brushless motors are waterproof, they can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

Mamba Monster 2 ESC Specs
Input voltageMIN: 2s LiPo; MAX: 6s LiPo
Max continuous amperage120A (full throttle continuous operation with cooling airflow)
BEC specificationsUser selectable output between 5 and 7 volts
Operating environmentWaterproof* design allows for use in nearly any environment.
BrakeProportional
ReversibleYes - with lockout
SizeL: 1.86 (47mm)
W: 2.19 56mm)
H: 1.33 (34mm)
Weight (without battery connector soldered to ESC)3.93 oz
111.5 g

*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Fan is not water resistant. Remove fan from ESC before exposing vehicle to liquids.

Castle Creations Mamba Monster 1/8 Waterproof ESC CC-MM2-ESC Castle Creations Mamba Monster 1/8 Waterproof ESC CC-MM2-ESC
$279.99
Available to order

Description

Meet the Monster.

Castle Creations introduction of the Mamba Monster was a break-through moment for R/C modelers wanting to experience what seemed to be unobtainable. Brute power and sheer stamina have made this our legacy “power up� for popular 1/8th scale buggies, truggies and on road vehicles and 1/10th scale monster trucks.

The current version we call Mamba Monster 2. The ESC is capable of 2S LiPo to a maximum of 6S LiPo, and is now waterproof (see product use statement below). This upgrade allows users to run their vehicles through the morning dew, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck. We’ve updated the case, allowing users easy access to fan changes, if necessary. Additionally, we’ve added solder posts to permit users to change battery wire length and direction as needed for an even more custom install.

 

 

*Although Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. *The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Castle Creations Mamba XL V2 34V 1:8TH / 1:5TH Extreme Car Castle Creations Mamba XL V2 34V 1:8TH / 1:5TH Extreme Car
$349.99
Available to order
Castle Creations Mamba XL V2 34V 1:8TH / 1:5TH Extreme Car
Castle Creations Mamba XLX 34v 1/5 Extreme ESC Castle Creations Mamba XLX 34v 1/5 Extreme ESC
$379.99
Available to order

Description

1:5 Scale Power to the Extreme.

Mamba XL X is a new high-performance controller for 1:5th scale RC hobby vehicles weighing up to 30 lbs. Paired with the 2028-800kv Extreme motor, this duo becomes the perfect combination for large-scale, ultra-high-performance RC vehicles. Have you ever seen a 1:5th scale Baja doing 70 mph? If you’ve got the traction, this Castle combination can get you there. The features of this recently revamped ESC will prove this supercharged combo will provide all of the brains and brawn needed to OVERPOWER 1:5th scale car and gas to electric conversions. 

NEW HIGH POWER BEC 
A robust, user adjustable, internal 20A peak BEC will provide plenty of juice for applications with powerful servos and electrical components that run off the ESC.

AUXILIARY WIRE FUNCTIONALITY ON-THE-FLY ADJUSTMENTS 
When the Castle Phoenix Edge line was introduced for heli and plane applications, we announced the addition of the user programmable auxiliary wire. Our surface enthusiasts will now have a taste of the simplicity and convenience of this feature with the Mamba X Series Electronic Speed Controllers (ESC). In short, the auxiliary wire is an extra wire that, when connected to an open channel on your radio, allows users to take advantage of on-the-fly adjustments (using your transmitter) that would otherwise be modified or set using the Castle Link Programming Suite. The feature is enabled through the Castle Link Programming system and one mode may be selected at a time. Several modes are available for on-the-fly programming:

Castle Mamba Monster 2 1.8th 25v Extreme Car ESC CC-MM2-COMBO2200 Castle Mamba Monster 2 1.8th 25v Extreme Car ESC CC-MM2-COMBO2200
$519.99
Available to order

Description

Description:

It’s time to meet Monster 2, he’s just as mean as his older brother but he likes to get wet. That’s right; the Mamba Monster 2 ESC is now potted by the good people at Castle in Kansas City. Users can run their vehicles through the morning dew, down the muddy road, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck.

Dualsky 10A 2-3S Brushless ESC DSXC1010BA Dualsky 10A 2-3S Brushless ESC DSXC1010BA
$28.99
Available to order

Description

Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)

Smooth and accurate speed control, excellent throttle linearity

Extreme low resistance, super current endurance

XMotorTM optimized timing advance.

High rate (8 KHz) switching (PWM)

Cutoff can be programmed for motor stop or reduced power

Brake/No Brake operation. Stop folding props cold or let fixed props freewheel

Full protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection

3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models

Throttle range can be configured, fully compatible with all market available transmitters

Microprocessor and BEC(Battery Elimination Circuit) use separate voltage regulator IC , with good anti-jamming capability

Programming card is ready! (for easily programming the ESC on field)

 

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Description

The Brushless Combo Set Thrust BL ECO 1:10 is primarily aimed for the owners of 1:10 Ready Set vehicles or KIT vehicles that want to make simple adjustments to increase their racer performance. The set includes the brushless high-performance motor with aluminum housing and the matching speed controller. The system is designed without sensor cable, allowing a particularly easy handling. 
 
Complete sensorless brushless set - ready to use.
Including gold-bonded plug system and t-plug battery connection.
 
New Features

  • Programmable (running mode; drag brake force; voltage cut-off; punch; maximum brake force)
  • 50A continuous amp
  • Battery: 4-9 cells NiMH / 2-3S LiPo

Brushless ESC Features:

  • Waterproof 50A ESC incl. cooler
  • Running mode: forward/brake/reverse or forward/reverse (programmable)
  • LiPo cut-off: non-protection / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V (programmable)
  • Overheat protection
  • Peak amps: 300A
  • BEC: 6V / 3A (switch mode)
  • Battery: 4-9 cells NiMH / 2-3S LiPo
  • Motor limit @ 2S: 8T on-road / 11T off-road
  • Motor limit @ 3S: 11T on-road / 14T off-road
  • Drag brake: 0% - 40% (programmable)
  • Start mode: Level 1 soft - Level 4 very aggressive (programmable)
  • Maximum brake force: 25% - 100% (programmable)
  • Motor timing: 18.75 
  • Size: 48,5x38x32 mm
  • Weight incl. cable : 90g

Brushless Motor Features:

  •  3421KV
  • 27.368 RPM/min @ 7.4 Volt
  • 4 Pole
  • Battery type: 4-9 cells NiMH / 2-3S LiPo
  • Size: 540
  • Length: : 52.0mm
  • Ø w/o fins: 36mm
  • Shaft length : 14,5mm
  • Ø shaft : 3,175 mm
  • Weight: : 199g
Absima 1/10 Brushless Motor Thrust BL 10T
Absima Brushless ESC A10 80A Thrust 1/10

70A BRUSHLESS SPEED CONTROL W/ HEAT SINK

Arrowind 80A ESC + 17T 1/8 Brushless Combo
Arrowind Brushless Combo 60W Esc + 13T 540 Motor

Description

Black Magic 1/10 Scale 60A ESC + 4350Kv Brushless Motor / ESC Combo BM-4PSL-C561 
This is a 4 pole 4350kv Brushless motor and 60 Amp Brushless ESC 
Perfect for any 1/10th Scale Car, Truck, or Buggy 
4-10 cell Nimh 
2-3 cell Lipo

Description

Black Magic 4 Poles Combo Motor 4074 2150KV + ESC 150A + Card w/ Waterproof Structure


 

Black

 
Black Magic 60A ESC Fitable For 4 Poles SL Motor

Description

Mamba Monster 2 is intended for on-road, buggies, truggies and monster trucks running up to 6S LiPo and tipping the scales at up to 15lbs. The innovative new case allows for fan changes, if necessary. Solder posts now permit users to change battery wire length and direction as needed.

As always, the Mamba Monster 2 offers industry-leading software functions and USB programming capability via Castle Link USB adapter (free with included coupon). Remember, the fan is not water proof, so users need to remove the fan before they head out into wet conditions.

Legal mumbo jumbo that we need you to read:
Although Monster 2 and Castle brushless motors are waterproof, they can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

Mamba Monster 2 ESC Specs
Input voltageMIN: 2s LiPo; MAX: 6s LiPo
Max continuous amperage120A (full throttle continuous operation with cooling airflow)
BEC specificationsUser selectable output between 5 and 7 volts
Operating environmentWaterproof* design allows for use in nearly any environment.
BrakeProportional
ReversibleYes - with lockout
SizeL: 1.86 (47mm)
W: 2.19 56mm)
H: 1.33 (34mm)
Weight (without battery connector soldered to ESC)3.93 oz
111.5 g

*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Fan is not water resistant. Remove fan from ESC before exposing vehicle to liquids.

Description

Meet the Monster.

Castle Creations introduction of the Mamba Monster was a break-through moment for R/C modelers wanting to experience what seemed to be unobtainable. Brute power and sheer stamina have made this our legacy “power up� for popular 1/8th scale buggies, truggies and on road vehicles and 1/10th scale monster trucks.

The current version we call Mamba Monster 2. The ESC is capable of 2S LiPo to a maximum of 6S LiPo, and is now waterproof (see product use statement below). This upgrade allows users to run their vehicles through the morning dew, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck. We’ve updated the case, allowing users easy access to fan changes, if necessary. Additionally, we’ve added solder posts to permit users to change battery wire length and direction as needed for an even more custom install.

 

 

*Although Monster 2 and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. *The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Castle Creations Mamba XL V2 34V 1:8TH / 1:5TH Extreme Car

Description

1:5 Scale Power to the Extreme.

Mamba XL X is a new high-performance controller for 1:5th scale RC hobby vehicles weighing up to 30 lbs. Paired with the 2028-800kv Extreme motor, this duo becomes the perfect combination for large-scale, ultra-high-performance RC vehicles. Have you ever seen a 1:5th scale Baja doing 70 mph? If you’ve got the traction, this Castle combination can get you there. The features of this recently revamped ESC will prove this supercharged combo will provide all of the brains and brawn needed to OVERPOWER 1:5th scale car and gas to electric conversions. 

NEW HIGH POWER BEC 
A robust, user adjustable, internal 20A peak BEC will provide plenty of juice for applications with powerful servos and electrical components that run off the ESC.

AUXILIARY WIRE FUNCTIONALITY ON-THE-FLY ADJUSTMENTS 
When the Castle Phoenix Edge line was introduced for heli and plane applications, we announced the addition of the user programmable auxiliary wire. Our surface enthusiasts will now have a taste of the simplicity and convenience of this feature with the Mamba X Series Electronic Speed Controllers (ESC). In short, the auxiliary wire is an extra wire that, when connected to an open channel on your radio, allows users to take advantage of on-the-fly adjustments (using your transmitter) that would otherwise be modified or set using the Castle Link Programming Suite. The feature is enabled through the Castle Link Programming system and one mode may be selected at a time. Several modes are available for on-the-fly programming:

Description

Description:

It’s time to meet Monster 2, he’s just as mean as his older brother but he likes to get wet. That’s right; the Mamba Monster 2 ESC is now potted by the good people at Castle in Kansas City. Users can run their vehicles through the morning dew, down the muddy road, across the soggy snow or just about anywhere else you’d be interested in running a 1/8th scale RC buggy or truck.

Description

Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)

Smooth and accurate speed control, excellent throttle linearity

Extreme low resistance, super current endurance

XMotorTM optimized timing advance.

High rate (8 KHz) switching (PWM)

Cutoff can be programmed for motor stop or reduced power

Brake/No Brake operation. Stop folding props cold or let fixed props freewheel

Full protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection

3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models

Throttle range can be configured, fully compatible with all market available transmitters

Microprocessor and BEC(Battery Elimination Circuit) use separate voltage regulator IC , with good anti-jamming capability

Programming card is ready! (for easily programming the ESC on field)