Tamiya 1/10 Volkswagen Type 2 RC 2Wheel Drive (T1) M-06
$279.99
Tamiya 1/10 Volkswagen Type 2 RC 2Wheel Drive (T1) M-06
$279.99
SKU:
T47420Availability:
Sold Out
Quantity:
Flat Rate $9.95 Shipping To Metro Areas*- Free Shipping For Orders Over $150 To Metro Areas* (Online orders only)
Description
This Tamiya R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1
Features:
M-06 Chassis: The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response
1/10 scale R/C model assembly kit
Polycarbonate body with separate molded plastic parts included to create bumper, light cases and side mirrors
The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity
239mm wheelbase M-06L chassis
Metal-plated dish type wheels
Includes 540 motor
Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
What's in the Box?
One (1) car kit, as described
M-06 Chassis Kit with tires, one set of wheels, foam inserts, VW Type 2 T1 body, 20T pinion gear, shocks, decal sheet, instruction manual, 540 brush equipped motor
Specifications:
Wheelbase: 239mm
Adjustable Gear Ratio: Yes
Bearings: Plastic bushing
Body: Clear untrimmed Volkswagen Type 2 T1 van
Body Material: Polycarbonate
Body Stickers: Included
Bumper: Front, urethane foam
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Chassis Material: ABS Plastic
Chassis Type: M-06L long wheelbase, molded plastic bathtub style
Drive: Rear wheel
Construction Type: Assembly Kit
Differential Type: Planetary gear type
Drive Type: 2WD
Electronic Speed Control (esc): Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
Motor: Brushed 540 Type
Scale: 1/10
Shock Damper: CVA Oil Filled
Steering: Bell-crank type with high torque servo saver
Suspension: 4-wheel fully independent double wishbone
Terrain Use: On-Road
Tires: 60D on-road 0.94 (24mm) wide, 2.2" (56mm) diameter, with foam inserts
Wheels: Gray plastic 0.94" (24mm) wide, 1.5" (38mm) diameter
Requirements:
Assembly
Radio system (transmitter and receiver)
Steering servo
7.2-7.4 volt battery pack & compatible charger
Tamiya PS paint
"
Features:
M-06 Chassis: The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response
1/10 scale R/C model assembly kit
Polycarbonate body with separate molded plastic parts included to create bumper, light cases and side mirrors
The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity
239mm wheelbase M-06L chassis
Metal-plated dish type wheels
Includes 540 motor
Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
What's in the Box?
One (1) car kit, as described
M-06 Chassis Kit with tires, one set of wheels, foam inserts, VW Type 2 T1 body, 20T pinion gear, shocks, decal sheet, instruction manual, 540 brush equipped motor
Specifications:
Wheelbase: 239mm
Adjustable Gear Ratio: Yes
Bearings: Plastic bushing
Body: Clear untrimmed Volkswagen Type 2 T1 van
Body Material: Polycarbonate
Body Stickers: Included
Bumper: Front, urethane foam
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Chassis Material: ABS Plastic
Chassis Type: M-06L long wheelbase, molded plastic bathtub style
Drive: Rear wheel
Construction Type: Assembly Kit
Differential Type: Planetary gear type
Drive Type: 2WD
Electronic Speed Control (esc): Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
Motor: Brushed 540 Type
Scale: 1/10
Shock Damper: CVA Oil Filled
Steering: Bell-crank type with high torque servo saver
Suspension: 4-wheel fully independent double wishbone
Terrain Use: On-Road
Tires: 60D on-road 0.94 (24mm) wide, 2.2" (56mm) diameter, with foam inserts
Wheels: Gray plastic 0.94" (24mm) wide, 1.5" (38mm) diameter
Requirements:
Assembly
Radio system (transmitter and receiver)
Steering servo
7.2-7.4 volt battery pack & compatible charger
Tamiya PS paint
"
Specifications
| Brand | Tamiya |
Others also bought
