Skip to content
Australia's Largest Hobby Retailer

Brushless Motors

Black Magic X-Spino 4 Poles Brushless Motor Black Magic X-Spino 4 Poles Brushless Motor
$59.99
Available to order

Description

Advantages:
a) Budget-friendly, high performance, best control feelings.
b) Timing is permanently set to zero degree (unchangeable) for SPEC race.
c) Very suitable for Rock Crawler when the ESC works with 21.5T sensored motor (Combo-JS6).

1 The combo includes:

1.1 JUSTOCK brushless ESC: 1pcs
1.2 XERUN 1/10 scale competition brushless motor: 1pcs
1.3 LED Progrma Box: 1pcs
1.4 5V cooling fan: 1pcs
1.5 Sensor cable: 1pcs

2 Features

2.1 Low cost, high performance.
2.2 Small and light weight.
2.3 Drives sensored and sensorless brushless motors, best control feelings.
2.4 The internal timing is always zero degree to complaint with the rules of SPEC races such as ROAR SPORTMAN. 
2.5 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
2.6 Plenty of programmable items.
2.7 Easily programmed with the LED Program Box, Multifunction LCD Program Box and USB Link Software.
2.8 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.9 Also suitable for rock crawler pro race when using

Blade 2205-2350Kv FPV Racing Motor Blade 2205-2350Kv FPV Racing Motor
$51.99
Available to order

Features

2205 – 2350Kv

Lower Kv rating, ideal power performance for 5” propeller setups

Dynamically Balanced

This computer aided balancing ensures that each motor is balanced precisely, offering optimal efficiency and power, every time.

Lightweight

Coming in at only 27 grams each, these lightweight motors give every pilot the power the desire, while keeping weight very minimal.

Easily Removable Can

The can of these motors can be easily removed with a 1.5mm hex wrench, making repairs and cleaning a breeze.

16mm by 19mm Mount

Mounting dimensions fit nearly all standard quadcopter frames between 150 and 250mm , offering a secure fit for any quadcopter with the integrated M3 threading.

M5 post

Standard threading and size for FPV motors, allowing these motors to host a variety of propellers.

Includes: Motor, 4 mounting screws, and nylon lock nut.

Carisma 1200KV Mini 130 Brushless Sensorless Motor CRS15430 Carisma 1200KV Mini 130 Brushless Sensorless Motor CRS15430
$63.99
Available to order
Carisma 1200KV Mini 130 Brushless Sensorless Motor
Dualsky Eco 2216c 980KV DSXMECO2216C Dualsky Eco 2216c 980KV DSXMECO2216C
$34.99
Available to order

Description

Features
 

The 2216C ECO motor from Dualsky has 980Kv of power and is a great choice for RC planes. This motor comes with propeller and motor mounts, in addition to gold plugs and screws.

Dynamite 6 Pole Brushless Marine Motor 2000kv Dynamite 6 Pole Brushless Marine Motor 2000kv
$137.99
Available to order
Dynamite 6 Pole Brushless Marine Motor 2000kv
Dynamite A3630-1500KV 6-Pole Marine Motor DYNM3835 Dynamite A3630-1500KV 6-Pole Marine Motor DYNM3835
$109.99
Available to order
Dynamite A3630-1500KV 6-Pole Marine Motor
E-Flite 440 Heli Brushless Motor Upgrade for Blade 450 EFLM1360H E-Flite 440 Heli Brushless Motor Upgrade for Blade 450 EFLM1360H
$74.99
Available to order

Description

Features

Ideal upgrade for Blade 4003D and other 400 and 450 class helicopters
High-quality construction wtih ball bearings and hardened steel shaft
Includes mounting hardware
Includes 11-tooth 0.5M pinion
Excellent motor for the Align T-Rex 450SA and other T-Rex 450 helis
Direct bolt-in motor for Blade 400 and Align T-Rex 450SA, no modification or additional hardware is necessary

Overview

The new E-flite 440H brushless helicopter motor is a terrific upgrade for the Blade® 400 or any other 400- or 450-size heli. The 440H helps provide better headspeed and quicker collective and cyclic response. Its efficient design, including high-quality magnets, keeps it cool, even after rigorous flights.

Specs

 

TypeBrushless
Size440
Maximum Burst Current40A (15 sec)
Continuous Amps25A
Cells3S
Speed Control25A - 40A Brushless
Overall Diameter28mm (1.10 in)
Shaft DiameterTop: 3mm, Bottom: 2.3mm
E-Flite 520H Helicopter Motor 1320Kv EFLM1370H E-Flite 520H Helicopter Motor 1320Kv EFLM1370H
$114.99
In stock
E-Flite 520H Helicopter Motor 1320Kv
E-Flite BL180m Ducted Fan Motor 11750Kv E-Flite BL180m Ducted Fan Motor 11750Kv
$25.99
Available to order
E-Flite BL180m Ducted Fan Motor 11750Kv
E-Flite Brushless Motor EFLM4090A E-Flite Brushless Motor EFLM4090A
$199.99
Available to order
E-Flite Brushless Motor
E-Flite Brushless Outrunner 10 Size EFLM7225 E-Flite Brushless Outrunner 10 Size EFLM7225
$64.99
Available to order

Description

E-Flite BL10 Motor VisionAire

 

Standard motor for VisionAire model aircraft.

E-Flite Park 250 Brushless Outrunner Motor 2200Kv EFLM1130 E-Flite Park 250 Brushless Outrunner Motor 2200Kv EFLM1130
$55.99
Available to order

Description

Ideal for 3D models 4–6 oz (115–170 g), and sport and scale models 6–12 oz (170–340 g) or models requiring up to 55 watts of power.

Features

Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
Up to 55 watts
Designed for firewall mount or carbon tube mount
Integrated Prop Saver design
Extremely quiet and lightweight—just .5 ounces (14 grams)
Upgraded performance motor for indoor IPS and 180 motors
High-torque, direct-drive alternative to inrunners
Includes mount, mounting hardware and 2mm gold BL connectors
High-quality construction with ball bearings and hardened steel shaft
Great lightweight outrunner for small indoor foamies

Specifications

Type Brushless outrunner
Size Upgrade for 180-size
Bearings or Bushings Bearings
Recommended Prop Range 5.5 x 4.5–8 x 6 Slow Flyer
Voltage 6–8.4V
RPM/Volt (Kv) 2200
Resistance (Ri) .25 ohms
Idle Current (Io) .45A
Continuous Current 7A
Maximum Burst Current 8A (15 sec)
Cells 6 Ni-MH/Ni-Cd or 2 Li-Po
Speed Control 6A–10A Brushless
Weight 14 g (0.5 oz)
Overall Diameter 22mm (.85 in)
Overall Length 23mm (.90 in)

E-Flite Park 300 Brushless Motor EFLM1150 E-Flite Park 300 Brushless Motor EFLM1150
$66.99
Available to order

Description


Park 300 Brushless Outrunner Motor, 1380Kv

Features:

  • Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Ideal for models requiring up to 85 watts of power
  • Integrated prop saver design
  • Mount, prop adapter and hardware included
  • External rotor design with 3.2mm shaft
  • Low noise level

Overview

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.


Specifications:

  • Type: Brushless outrunner
  • Size: 180/280 replacement
  • Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
  • Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
  • Voltage: 7.2–11.1V
  • RPM/Volt (Kv): 1380
  • Resistance (Ri): .33 ohms
  • Idle Current (Io): .40A @ 8V
  • Continuous Current: 7A
  • Maximum Burst Current: 9A (15 sec)
  • Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • Speed Control: 8–10A brushless
  • Weight: 24 g (.8 oz)
  • Overall Diameter: 28mm (1.10 in)
  • Shaft Diameter: 3.17mm (1/8 in)
  • Overall Length: 22mm (.90 in)

Needed to Complete:

  • 8A–10A Brushless ESC
  • 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Kit Includes:

  • Gold Bullet Connector Set, 2mm (3)
  • Prop Adapter with Collet, 1/8
E-Flite Park 480 Brushless Outrunner 1020KV EFLM1505 E-Flite Park 480 Brushless Outrunner 1020KV EFLM1505
$85.99
In stock

Overview

Ideal for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 275 watts of power.

Features

Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)

Ideal for scale park flyers 25–35 oz (710–990 g)

Ideal for models requiring up to 275 watts of power

High-torque, direct-drive alternative to inrunner brushless motors

Includes mount, prop adapters, and mounting hardware

External rotor design—4mm shaft can easily be reversed for alternative motor installations

Slotted 14-pole outrunner design

High-quality construction with ball bearings and hardened steel shaft

Quiet, lightweight operation

The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 275 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and it would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).

Specifically this 1020Kv option can handle more current than the 920Kv version, so it is more efficient when matched with the Thunder Power Pro-Lite cells.

What you Need

25A–40A brushless ESC


2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-Cd


10x7–12x6 propeller

E-Flite Power 10 Brushless Outrunner motor. 1300 rpm/V E-Flite Power 10 Brushless Outrunner motor. 1300 rpm/V
$102.99
Available to order

Overview

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes.

Features

Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes

Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)

Ideal for models requiring up to 450 watts of power

High-torque, direct-drive alternative to inrunner brushless motors

Includes mount, prop adapters and mounting hardware

External rotor design—5mm shaft can easily be reversed for alternative motor installations

Slotted 14-pole outrunner design

High-quality construction with ball bearings and hardened steel shaft

Quiet, lightweight operation

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32 to 48 ounces (910 to 1360 grams), 3D airplanes weighing 28 to 36 ounces (790 to 1020 grams), or models requiring up to 375 watts of power. It’s an especially good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics.


What you Need

40A ESC

6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po

10x5 to 12x6 electric props

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Description

Advantages:
a) Budget-friendly, high performance, best control feelings.
b) Timing is permanently set to zero degree (unchangeable) for SPEC race.
c) Very suitable for Rock Crawler when the ESC works with 21.5T sensored motor (Combo-JS6).

1 The combo includes:

1.1 JUSTOCK brushless ESC: 1pcs
1.2 XERUN 1/10 scale competition brushless motor: 1pcs
1.3 LED Progrma Box: 1pcs
1.4 5V cooling fan: 1pcs
1.5 Sensor cable: 1pcs

2 Features

2.1 Low cost, high performance.
2.2 Small and light weight.
2.3 Drives sensored and sensorless brushless motors, best control feelings.
2.4 The internal timing is always zero degree to complaint with the rules of SPEC races such as ROAR SPORTMAN. 
2.5 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
2.6 Plenty of programmable items.
2.7 Easily programmed with the LED Program Box, Multifunction LCD Program Box and USB Link Software.
2.8 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.9 Also suitable for rock crawler pro race when using

Features

2205 – 2350Kv

Lower Kv rating, ideal power performance for 5” propeller setups

Dynamically Balanced

This computer aided balancing ensures that each motor is balanced precisely, offering optimal efficiency and power, every time.

Lightweight

Coming in at only 27 grams each, these lightweight motors give every pilot the power the desire, while keeping weight very minimal.

Easily Removable Can

The can of these motors can be easily removed with a 1.5mm hex wrench, making repairs and cleaning a breeze.

16mm by 19mm Mount

Mounting dimensions fit nearly all standard quadcopter frames between 150 and 250mm , offering a secure fit for any quadcopter with the integrated M3 threading.

M5 post

Standard threading and size for FPV motors, allowing these motors to host a variety of propellers.

Includes: Motor, 4 mounting screws, and nylon lock nut.

Carisma 1200KV Mini 130 Brushless Sensorless Motor

Description

Features
 

The 2216C ECO motor from Dualsky has 980Kv of power and is a great choice for RC planes. This motor comes with propeller and motor mounts, in addition to gold plugs and screws.

Dynamite 6 Pole Brushless Marine Motor 2000kv
Dynamite A3630-1500KV 6-Pole Marine Motor

Description

Features

Ideal upgrade for Blade 4003D and other 400 and 450 class helicopters
High-quality construction wtih ball bearings and hardened steel shaft
Includes mounting hardware
Includes 11-tooth 0.5M pinion
Excellent motor for the Align T-Rex 450SA and other T-Rex 450 helis
Direct bolt-in motor for Blade 400 and Align T-Rex 450SA, no modification or additional hardware is necessary

Overview

The new E-flite 440H brushless helicopter motor is a terrific upgrade for the Blade® 400 or any other 400- or 450-size heli. The 440H helps provide better headspeed and quicker collective and cyclic response. Its efficient design, including high-quality magnets, keeps it cool, even after rigorous flights.

Specs

 

TypeBrushless
Size440
Maximum Burst Current40A (15 sec)
Continuous Amps25A
Cells3S
Speed Control25A - 40A Brushless
Overall Diameter28mm (1.10 in)
Shaft DiameterTop: 3mm, Bottom: 2.3mm
E-Flite 520H Helicopter Motor 1320Kv
E-Flite BL180m Ducted Fan Motor 11750Kv
E-Flite Brushless Motor

Description

E-Flite BL10 Motor VisionAire

 

Standard motor for VisionAire model aircraft.

Description

Ideal for 3D models 4–6 oz (115–170 g), and sport and scale models 6–12 oz (170–340 g) or models requiring up to 55 watts of power.

Features

Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
Up to 55 watts
Designed for firewall mount or carbon tube mount
Integrated Prop Saver design
Extremely quiet and lightweight—just .5 ounces (14 grams)
Upgraded performance motor for indoor IPS and 180 motors
High-torque, direct-drive alternative to inrunners
Includes mount, mounting hardware and 2mm gold BL connectors
High-quality construction with ball bearings and hardened steel shaft
Great lightweight outrunner for small indoor foamies

Specifications

Type Brushless outrunner
Size Upgrade for 180-size
Bearings or Bushings Bearings
Recommended Prop Range 5.5 x 4.5–8 x 6 Slow Flyer
Voltage 6–8.4V
RPM/Volt (Kv) 2200
Resistance (Ri) .25 ohms
Idle Current (Io) .45A
Continuous Current 7A
Maximum Burst Current 8A (15 sec)
Cells 6 Ni-MH/Ni-Cd or 2 Li-Po
Speed Control 6A–10A Brushless
Weight 14 g (0.5 oz)
Overall Diameter 22mm (.85 in)
Overall Length 23mm (.90 in)

Description


Park 300 Brushless Outrunner Motor, 1380Kv

Features:

  • Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Ideal for models requiring up to 85 watts of power
  • Integrated prop saver design
  • Mount, prop adapter and hardware included
  • External rotor design with 3.2mm shaft
  • Low noise level

Overview

Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g), or models requiring up to 85 watts of power.


Specifications:

  • Type: Brushless outrunner
  • Size: 180/280 replacement
  • Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
  • Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
  • Voltage: 7.2–11.1V
  • RPM/Volt (Kv): 1380
  • Resistance (Ri): .33 ohms
  • Idle Current (Io): .40A @ 8V
  • Continuous Current: 7A
  • Maximum Burst Current: 9A (15 sec)
  • Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • Speed Control: 8–10A brushless
  • Weight: 24 g (.8 oz)
  • Overall Diameter: 28mm (1.10 in)
  • Shaft Diameter: 3.17mm (1/8 in)
  • Overall Length: 22mm (.90 in)

Needed to Complete:

  • 8A–10A Brushless ESC
  • 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Kit Includes:

  • Gold Bullet Connector Set, 2mm (3)
  • Prop Adapter with Collet, 1/8

Overview

Ideal for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 275 watts of power.

Features

Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)

Ideal for scale park flyers 25–35 oz (710–990 g)

Ideal for models requiring up to 275 watts of power

High-torque, direct-drive alternative to inrunner brushless motors

Includes mount, prop adapters, and mounting hardware

External rotor design—4mm shaft can easily be reversed for alternative motor installations

Slotted 14-pole outrunner design

High-quality construction with ball bearings and hardened steel shaft

Quiet, lightweight operation

The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 275 watts of power. It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and it would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).

Specifically this 1020Kv option can handle more current than the 920Kv version, so it is more efficient when matched with the Thunder Power Pro-Lite cells.

What you Need

25A–40A brushless ESC


2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-Cd


10x7–12x6 propeller

Overview

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes.

Features

Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes

Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)

Ideal for models requiring up to 450 watts of power

High-torque, direct-drive alternative to inrunner brushless motors

Includes mount, prop adapters and mounting hardware

External rotor design—5mm shaft can easily be reversed for alternative motor installations

Slotted 14-pole outrunner design

High-quality construction with ball bearings and hardened steel shaft

Quiet, lightweight operation

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32 to 48 ounces (910 to 1360 grams), 3D airplanes weighing 28 to 36 ounces (790 to 1020 grams), or models requiring up to 375 watts of power. It’s an especially good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics.


What you Need

40A ESC

6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po

10x5 to 12x6 electric props