a) Budget-friendly, high performance, best control feelings.
b) Timing is permanently set to zero degree (unchangeable) for SPEC race.
c) Very suitable for Rock Crawler when the ESC works with 21.5T sensored motor (Combo-JS6).
1 The combo includes:
1.1 JUSTOCK brushless ESC: 1pcs
1.2 XERUN 1/10 scale competition brushless motor: 1pcs
1.3 LED Progrma Box: 1pcs
1.4 5V cooling fan: 1pcs
1.5 Sensor cable: 1pcs
2.1 Low cost, high performance.
2.2 Small and light weight.
2.3 Drives sensored and sensorless brushless motors, best control feelings.
2.4 The internal timing is always zero degree to complaint with the rules of SPEC races such as ROAR SPORTMAN.
2.5 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
2.6 Plenty of programmable items.
2.7 Easily programmed with the LED Program Box, Multifunction LCD Program Box and USB Link Software.
2.8 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.9 Also suitable for rock crawler pro race when using
Xerun V10 motors are specifically designed for extreme 1/10 and 1/12 scale competition racing and are compliant with ROAR, IFMAR, BRCA and JMRCA rules. Featuring the perfect combination of high quality materials, exquisite craftsmanship and cutting edge technology, the V10s provide the extra advantage all professional racers are looking for with minimal maintenance required.
- Compliant with ROAR and IFMAR rules
- Mechanical timing adjustable
- 200℃ high temperature high purity copper windings maximizes conductivity and reliability
- Super low resistance multi-layers outlet PCB (Printed Circuit Board)
- Removable / replaceable rotor
- High RPM precision bearings (Brand: NSK)
- Powerful high temperature sintered NdFeb (Neodymium) magnets
- High efficiency of energy conversion
This is the Hobbywing Justock Club Spec Sensored Brushless ESC and 13.5 Turn Motor Combo, with an included LED Program Box. Race a spec stock class? The Hobbywing Justock combo is the perfect ESC and motor for the stock racer seeking a fixed timing, efficient and lightweight solution. The ESC boasts plenty of programmable features and is also an excellent choice for the rock clawler racer. To keep your investment protected, the Justock ESC features low voltage cut-off, over-heat protection and throttle signal loss protection.
- Low cost, high performance.
- Small and light weight.
- Drives sensored and sensorless brushless motors, best control feelings.
- Fixed zero degree timing, complaint with the rules of SPEC races such as ROAR
- Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
- Plenty of programmable items.
- Easily programmed with the LED Program Box, Multifunction LCD Program Box and USB Link Software.
- ESC firmware can be updated through the USB adapter in the LCD Program Box.
- Also suitable for rock crawler pro race when using “Crawler� working mode.
- Fixed timing, non adjustable
- Top quality materials:
- Aluminum shell (case)
- Best quality magnets of high temperature endurance
- Copper wires of high temperature endurance
- Top quality bearings
- Dustproof design
- 5.5T to 21.5T motors use low resistance 3.5mm bullet-connectors, plug and play.
- The sensor port is parallel to the end bell, easy for installation, more suitable for smaller chassis with limited space.
The Flux Scream is the perfect match for any 1/8th scale electric buggy or truggy!
With 1965Kv on tap, this massive brushless motor gives jaw-dropping acceleration and blinding top speeds! Match it with the #101712 Flux Rage 1:8th scale 80Amp Brushless ESC for a perfect blend of grunt and all-out speed with twin 2S power for up to 14.4 volts of juice!
Shaft Diameter - 5mm
Diameter - 42mm
Length - 68mm (without shaft)
Shaft length - 18.5mm
Weight - 345g
Machined aluminum casing
Ball bearing supported shaft
This part fits the following kits/parts
- Trophy Buggy Flux RTR (2.4GHz)
- Trophy Truggy Flux RTR (2.4GHz)
This version of the Flux Alphastar 2350Kv Brushless Motor has longer wires to reach the ESC mounted under the spare tyre at the back of the Apache C1. The Flux Alphastar 2350 features a 5mm motor shaft. It can fit optional pinion gears so you can gear it up for high speed runs, or gear it down a bit for increased acceleration on the track.
For maximum power in your 1/10th scale on- or off-road vehicle, you need a powerful and versatile motor! This 4000KV motor has loads of power, enough for big air, huge top speeds, and wheel-spinning, grin-inducing sideways stunts!
The MMH-4000KV is great for all kinds of 1/10th scale vehicles:
- touring cars
- Mini racers
- desert buggies
- vintage touring cars
- stadium trucks
- short course trucks
- desert trucks
4000kV Sensorless Brushless 4-Pole 1/10th Scale Motor
4mm bullet connectors
Max out the potential of your racing machine with HPI Flux PRO brushless racing motors! Available in a full range of winds suitable for all types of cars, buggies, trucks and more, the Flux PRO motors are your ticket to the winners circle! These sensored motors feature adjustable timing to provide the fine touch that pro-level racers need, and the covered outer bearing and machined aluminium case give you durability and peace of mind when youre out on the track, fighting for the lead.
4300 rpm/volt / Use with FLUX RELOAD brushless ESC
Add a shot of power to your car or truck with the Flux Shot Brushless Motor! Rated at 4300KV (equivalent to a 9-turn modified brushed motor), the Flux Shot is the perfect way to get into brushless power for any car or truck!
Combine with the #101749 Flux Reload v2 Brushless ESC for a major boost to any standard brushed motor RTR kit!
This is the standard motor in the Bullet Flux truck, so you know its got loads of power!
- 9T/4300KV 540 sized Motor
- Diameter - 35.8mm
- Length - 50mm (without shaft)
- Shaft Diameter - 3.17mm
- Shaft length - 15mm
- Weight - 165g
- Machined aluminum heatsink casing.
This part fits the following kits/parts
- Bullet ST Flux RTR
- Bullet MT Flux RTR
- Bullet ST FLUX RTR (2.4 GHz)
- Bullet MT FLUX RTR (2.4 GHz)
- RTR MINI-TROPHY WITH DT-1 TRUCK BODY
- BLITZ FLUX RTR (EU)
2200 rpm/volt / Use with FLUX BLUR ESC
The Flux Tork 2200 motor is the centrepiece of the Savage Flux HP, and provides the jaw-dropping power that allows it to do standing backflips on level ground, and easy double backflips off even medium-size jumps!
Please note: The Flux Tork 2200 must be used with a speedo that can handle the immense power it requires, the #100685 Flux Blur is the perfect match!
The Flux Tork 2200 features the coolest motor cases weve ever seen, with massive machined cooling fins that really make it look the part of an all-out power plant! With a 5mm motor shaft it can fit the upcoming optional pinion gears so you can get even MORE top speed for those insane runs, or gear it down a bit for increased acceleration on the track.
The ideal speedo match for the Tork 2200 is the #100685 Flux Blur speedo, the most powerful brushless speed controller we could find. With the ability to handle twin 3S LiPo batteries (thats a total of 6S LiPo power!) it can deal with anything the Tork 2200 motor can dish out! 6mm bullet connectors secure the motor wires for loss-free connection to the 12-gauge wires, and to connect to each battery pack weve attached real Deans connectors for zero power loss and total efficiency. We figured why re-invent the wheel and release our own connector when the best is already available? Topping off the versatility of the Flux Blur speedo (literally) is an integrated cooling fan, which allows the speedo to operate at its ideal temperature.
Finally, you have the ability to easily connect it to your computer for total programming control! With our #100573 USB Programming Kit you can connect the Blur to any Windows-based PC to control all the various facets of its power delivery, braking, throttle curves, battery cut-off and much more. You can also save various profiles to have profiles for racing, insane speed runs, stunts, fun running and more.
Add the range of optional Flux Tork pinion gears for increased tuning and even more insane acceleration!
#100911 PINION GEAR 12 TOOTH (1M / 5mm SHAFT)
#100912 PINION GEAR 13 TOOTH (1M / 5mm SHAFT)
#100913 PINION GEAR 14 TOOTH (1M / 5mm SHAFT)
#100914 PINION GEAR 15 TOOTH (1M / 5mm SHAFT)
#100915 PINION GEAR 16 TOOTH (1M / 5mm SHAFT)
#100916 PINION GEAR 17 TOOTH (1M / 5mm SHAFT)
#100917 PINION GEAR 18 TOOTH (1M / 5mm SHAFT)
#100918 PINION GEAR 19 TOOTH (1M / 5mm SHAFT)
#100919 PINION GEAR 20 TOOTH (1M / 5mm SHAFT)
#100920 PINION GEAR 21 TOOTH (1M / 5mm SHAFT)
#100921 PINION GEAR 22 TOOTH (1M / 5mm SHAFT)
#102086 PINION GEAR 23 TOOTH (1M / 5mm SHAFT)
#102087 PINION GEAR 24 TOOTH (1M / 5mm SHAFT)
#102088 0924 PINION GEAR 25 TOOTH (1M / 5mm SHAFT) (standard)
With the Flux Tork 2200 and Blur combo, you get all the power you can desire, with custom tuning and multiple battery handling thrown in for fun! You can get your friends saying what the Flux?! as fast as you can pull the trigger! Youll have to experience it to believe it!
Motor and Battery Combinations
The Flux Tork 2560Kv Brushless Motor requires very powerful batteries to get the most out of it - please make sure that you use the right combination! HPI highly recommend the use of LiPo batteries above 4000mAh and 20C. Using batteries with lower ratings, or the use of lower quality LiPo batteries, may cause damage to battery and/or speed control. Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries.
The term Kv refers to the number of RPMs that the motors will try to deliver per volt applied, and is a standard term for brushless motor power.
#100685 FLUX TORK 2200Kv BRUSHLESS MOTOR
#102703 FLUX TORK 2600Kv BRUSHLESS MOTOR
#100684 FLUX BLUR ESC
#100686 FLUX HP 2200Kv BRUSHLESS SYSTEM
#102701 FLUX HP 2600Kv BRUSHLESS SYSTEM
This part fits the following kits/parts
- RTR SAVAGE FLUX HP WITH GT-2 TRUCK BODY
- Vorza Flux HP RTR (2.4GHz)
- RTR VORZA FLUX HP WITH VB-1 BUGGY BODY
- RTR SAVAGE FLUX HP WITH 2.4GHz & GT-2 TRUCK BODY
- RTR SAVAGE FLUX 2350
- RTR SUPER 5SC FLUX