Skip to content
Australia's Largest Hobby Retailer

Brushed ESCs

Absima 1/10 Brushed ESC ECU1 70A Waterproof AB2100001 Absima 1/10 Brushed ESC ECU1 70A Waterproof AB2100001
$53.99
In stock

Description

1:10 for brushed motors
to 15 turns
70A duration
480A short-term
6V-7.4V
NiMh LiPo & LiFe &
waterproof sealed
35.8 x 38.5 x 33 mm
62g

Axial AE-5 Waterproof ESC with Reverse AX31144 Axial AE-5 Waterproof ESC with Reverse AX31144
$69.99
Temporarily Out of Stock

Description

The AE-5 ESC features include 3S LiPo capability, adjustable drag brake and its waterproof! Settings can be easily switched “in the field� between LiPo and NiMH battery types with a simple jumper – no more complex procedures!

• Jumper 1 provides a simple plug and play choice between LiPo or NiMH batteries
• Jumper 2 switches drag brake settings
• Waterproof design
• Includes Star style battery plug
• No on/off switch - power supplied by battery connection
• Laser etched heat sink

* Always remember to disconnect the battery when vehicle is not in use.

Dynamite WP 60A FWD/REV Brushed ESC Dynamite WP 60A FWD/REV Brushed ESC
$55.99
In stock

Description

Overview

 

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

* While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.

 

Features

  • Waterproof for all weather operation *
  • LiPo and NiMH compatible
  • Program functions changed with the use of jumper pins
  • Up to an 8T motor limit
  • Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
  • Crawler running mode
  • Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation
HPI EN-2 Electronic Speed Control With Reverse HPI-349 HPI EN-2 Electronic Speed Control With Reverse HPI-349
$37.99
In stock

Description

EN-2 Micro ESC with Reverse. As standard in the Micro RS4.

Specification:

  • Input Voltage: 7.2V-8.4V(NiMH)
  • Output: Rating: 35A, Peak: 60A
  • Out max power :25A/7.2V (Max 180W)
  • Size: 23x29x18.8mm
  • Weight: 19.5g
  • BEC: 5V/1A
  • P.W.M: 1KHz
  • Motor limit :380 brushed motor [≤7.2V (6cells)]

Please note: This ESC does not have LiPo Low Voltage Cut-Off Protection, therefore it is not suitable to be used with LiPo Battery Packs.

HPI RSC-18 ESC for Recon HPI-105505 HPI RSC-18 ESC for Recon HPI-105505
$53.99
In stock

Description

RECON

Genuine HPI quality spare part for easy maintenance and repairs.

This part fits the following kits/parts

  • RTR MINI RECON WITH 2.4GHz and SQUAD ONE BODY (EU 2-pin) 
  • RTR MINI RECON WITH 2.4GHz and SQUAD ONE BODY (UK 3-pin)
HPI SC-15WP Waterproof ESC HPI-105906 HPI SC-15WP Waterproof ESC HPI-105906
$62.99
In stock

Description

Reversable speed control. Use with brushed motors down to 15 turn.

The waterproof SC-15WP electronic speed controller features a LiPo battery cut-off to make your driving time safe as well as fun! You can use a 6- or 7-cell NiMH battery, OR a 2S Lithium-Polymer battery for extra speed and power! The safety cut-off makes sure any LiPo battery isnt discharged too much, extending its lifetime while protecting your batteries!

  • Waterproof!
  • 6- or 7-cell NiMH compatability
  • 2S LiPo compatability
  • LiPo safety cut-off
  • Standard battery plug
  • Dual bullet-style motor plugs

This part fits the following kits/parts

  • RTR BLITZ SHORT COURSE 
  • RTR E-FIRESTORM 10T 
  • RTR E-FIRESTORM 10T 
  • RTR SPRINT 2 SPORT W/ 1969 CHEVROLET® CAMARO BODY 
  • RTR SPRINT 2 SPORT WITH BMW M3 GT2 BODY 
  • RTR SPRINT 2 DRIFT WITH 2010 CAMARO BODY 
  • RTR SPRINT 2 SPORT WITH FALKEN PORSCHE 911 GT3 RSR 
  • RTR SPRINT 2 WITH 1969 MUSTANG RTR-X BODY (EU)
HPI SC-3SWP2 Waterproof Electronic Speed Control HPI-114712 HPI SC-3SWP2 Waterproof Electronic Speed Control HPI-114712
$75.99
In stock

Description

Waterproof, powerful, rugged and now even smaller than before!

The SC-3SWP2 is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether youve got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The SC-3SWP2 is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud!

This new version 2 is smaller than the original, making it perfectly sized to fit in the tight spaces of the latest RC vehicles, whether you have a touring car racer or desert buggy!

If youve got plenty of power to strap into your RC, you can count on the SC-3SWP2 to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.

LRP A.I. Runner Bullet Reverse Electronic Speed Control LRP-83080 LRP A.I. Runner Bullet Reverse Electronic Speed Control LRP-83080
$89.99
In stock

Description

100% waterproof: The speed control is 100% waterproof and can be operated under water with full power.

LRP Automatic: With LRP´s exclusive true Automatic technology, a push button setup is completely unnecessary: Just plug-in the speedo and drive! The speed control immediately �learns” the individual transmitter setting and is perfectly set-up for every run with the correct neutral-, full speed forward- and full speed reverse transmitter settings. Whatever your car´s configuration is, the LRP True Automatic adapts to it and determines your perfect setup.

Fail Safe: Built in Fail Safe: What is Fail Safe? Another technological highlight is the factory built in Fail Safe System. �The guardian angel” of your RC car. The Fail Safe System continuously monitors the radio signals being sent to your RC car. If incomplete or �false” signals are received as a result of low batteries or radio frequency interference, your LRP A.I. Automatic Pro Reverse speed control reacts instantly and shuts off your model to protect it against damage due to interference.

Features:

LRP´s exclusive A.I. Automatic Setup
Fail Safe System
Forward/Reverse speed control
100% waterproof
German Technology
Plug-in-and-Drive
3x Multi Protection System
4, 5 and 6 cells
25 years warranty

Specifications:

Set-up Procedure automatic
Fail Safe System yes
Weight 19.0g
Size 26.0 x 26.0 x 15.7mm
High frequency yes
Motorlimit over 13 Turns
Multi-Protection-System yes
Voltage Input 4.8-7.2V
Connectors Standard Tamiya Stlye
Rated Current 80 A
forward/brake/reverse yes
Waterproof yes

LRP AI Runner Reverse V2 LRP-83020 LRP AI Runner Reverse V2 LRP-83020
$67.99
In stock
LRP AI Runner Reverse V2
LRP ESC A.I. Automatic Bullet Reverse Digital LRP-83370 LRP ESC A.I. Automatic Bullet Reverse Digital LRP-83370
$89.99
Out of stock

Description

Do you want to setup the speed control or do you want to drive your RC car? These words are mostly becoming reality, if a driver wants to setup his speedo quickly and have fun with his RC car.

The new LRP A.I. Automatic speed control line stops this unloved scenario! No button, no setup = NO PROBLEM — just plug-in an play! LRP electronic now adds yet another technological milestone to its highly successful speed control line. The innovative LRP True Automatic combines the performance of the LRP speed control with the comfort of an automatic function, adapted specially to needs of RC novices. Never has it been easier to use a professional speed control, never before have you had more time to concentrate on the actual task of driving. With the A.I. speed control line, the LRP engineers developed a completely new speedo generation with built-in artificial intelligence. These feature comes true in the product name: A.I.! LRP Automatic: With LRP´s exclusive true Automatic technology, a push button setup is completely unnecessary: Just plug-in the speedo and drive! The speed control immediately �learns” the individual transmitter setting and is perfectly set-up for every run with the correct neutral-, full speed forward- and full speed reverse transmitter settings. Whatever your car´s configuration is, the LRP True Automatic adapts to it and determines your perfect setup.

Fail Safe: Built in Fail Safe: What is Fail Safe? Another technological highlight is the factory built in Fail Safe System. �The guardian angel” of your RC car. The Fail Safe System continuously monitors the radio signals being sent to your RC car. If incomplete or �false” signals are received as a result of low batteries or radio frequency interference, your LRP A.I. Automatic Bullet Reverse speed control reacts instantly and shuts off your model to protect it against damage due to interference.

LRP A.I. Bullet Reverse digital: The bullet is the top-of-the-line speed control in the Automatic line and handles all the hottest motor of the market.

Features:

LRP´s exclusive A.I. Automatic Setup
Fail Safe System
Forward/Reverse speed control
25 years warranty
Plug-in-and-Drive
3x Multi Protection System
4, 5 and 6 cells

Specifications:

BEC / Electric power supply of the receiver 5.0V
Set-up Procedure automatic
Fail Safe System Yes
Weight 51.0g
Size 42.5 x 42.5mm
High frequency Yes
Motorlimit no motorlimit
Multi-Protection-System Yes
Voltage Input 4-7 cells (4.8-8.4V)
Connectors Standard Tamiya Stlye
Rated Current 225A
Typical Voltage Drop @20A 0.048V
forward/brake/reverse Yes

Maverick MSC-30BR-WP BRUSHED SPEED CONTROLLER Maverick MSC-30BR-WP BRUSHED SPEED CONTROLLER
$57.99
Temporarily Out of Stock

Description

The MSC-30BR-WP is a durable speed controller that is suitable for RC vehicles of all type! Whether youve got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The MSC-30BR-WP is also fully waterproof, making it the a great choice for anyone who enjoys playing in wet conditions.

The MSC-30BR-WP can handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, and features a safety cut-off to protect your LiPo batteries. 

Features

  • 2S or 3S LiPo with voltage protection
  • 5-9 cell NiMH or NiCd
  • Suitable for all types of 1/10th scale vehicles

Specification:

  • Forward Continuous Current: 40A
  • Forward Burst Current: 180A
  • Reverse Continuous Current: 20A
  • Reverse Burst Current: 90A
  • Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
  • Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat
  • Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v
  • Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v
  • Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
  • PWM Frequency: 1 KHz
  • Dimensions: 46.5x34x28.5mm
  • Weight: 65g
Traxxas EVX-2 ESC for Summit TRA-3019R Traxxas EVX-2 ESC for Summit TRA-3019R
$229.99
In stock

Description

The EVX-2 delivers an incredible 16-plus volts, from two battery packs, making 16.8-volt, twin-motor setups more powerful than ever! Designed by Traxxas, the EVX-2 features a completely waterproof design, three drive profiles, Thermal Shutdown Protection, and gold-plated Traxxas High-Current Connectors. The EVX-2 also includes patent-pending Training Mode.™ This profile reduces the overall power output of the EVX-2 by 50% making it easier for young/new drivers to develop their control skills before unleashing full-power operation. EVX-2 is equipped with two-stage low voltage detection (LVD) to allow LiPo battery use. The EVX-2 is manufactured by Traxxas to ensure the highest level of quality and support.

The EVX-2 uses Traxxas exclusive EZ-Set push-button set-up and a multi-colored LED making it a snap to adjust. Its microprocessor control has three built-in programming modes including: Sport Mode with forward, brakes, and reverse; Racing Mode with forward, brakes, and no reverse; and the exclusive Training Mode™ that limits forward and reverse power by 50% while still applying 100% brakes. Built-in thermal shutdown protection adds an extra level of safety. Sophisticated, high-frequency operation and low internal resistance provide longer run times, more speed, and more fun!

The exclusive Training Mode™ limits full throttle output to 50% making it easier for new or young drivers to develop their control skills. With the high-frequency efficiency of the EVX-2, run time is also greatly increased. When theyre ready, simply change profiles to unleash full-throttle action. Only Traxxas has it!

EVX-2 Waterproof ESC Features

■Built-in two-stage low voltage detection (LVD)
for Lithium Polymer (LiPo) battery use
■16.8 Volts of Power
■Waterproof Design
■Microprocessor Controlled
■Traxxas High-Current Connectors
■Three Drive Profiles
■Patent-Pending Training Mode
■EZ-Set® Push-Button Set-Up
■Thermal Shutdown Protection
■For Traxxas E-Maxx®, E-Revo® and Summit

EVX-2 LVD (WATERPROOF) SPECIFICATIONS

Input voltage: ­ 6-14 NiCad and NiMH cells (7.2 to 16.8 volts DC)
4-cell LiPo (14.8 volts DC)

Case Size: ­ 2.27W x 2D x 1.05H

Weight: ­ 3.6 ounces

Motor Limit (540 size): ­ 10-turns

Motor Limit (550 size): ­ 12-turns

On-Resistance­ (@Trans)–FWD/REV: ­ 0.004 ohms / 0.004 ohms

Rated Current–FWD/REV: ­ 180 amps / 180 amps

Braking Current: ­ 360 amps

Continuous Current (at 100°F amb.): ­ 30 Amps

Reverse Delay: ­ None

BEC Voltage: ­ 6.0 volts DC

BEC Current: ­ 2.5 amps

Power Wire: ­ 14 Gauge / 3

Input Harness Wire: ­ 26 Gauge / 9.5

Motor Wires: ­ 14 Gauge / 4

Transistor Type: ­ MOSFET

PWM Frequency: ­ 1700 Hz

Thermal Protection: ­ Thermal shutdown

Profile selection: ­ Sport Mode:

100% fwd, 100% brakes, 100% rev.

Race Mode:
100% fwd, 100% brakes, no rev.

Training Mode*:
50% fwd, 100% brakes, 50% rev.
Single-button setup: ­ Yes, Traxxas EZ-Set
 
EVX-2 LVD (WATERPROOF) SPECIFICATIONS
Input voltage: ­ 6-14 NiCad and NiMH cells (7.2 to 16.8 volts DC)
4-cell LiPo (14.8 volts DC)
Case Size: ­ 2.27W x 2D x 1.05H
Weight: ­ 3.6 ounces
Motor Limit (540 size): ­ 10-turns
Motor Limit (550 size): ­ 12-turns
On-Resistance­ (@Trans)–FWD/REV: ­ 0.004 ohms / 0.004 ohms
Rated Current–FWD/REV: ­ 180 amps / 180 amps
Braking Current: ­ 360 amps
Continuous Current (at 100°F amb.): ­ 30 Amps
Reverse Delay: ­ None
BEC Voltage: ­ 6.0 volts DC
BEC Current: ­ 2.5 amps
Power Wire: ­ 14 Gauge / 3
Input Harness Wire: ­ 26 Gauge / 9.5
Motor Wires: ­ 14 Gauge / 4
Transistor Type: ­ MOSFET
PWM Frequency: ­ 1700 Hz
Thermal Protection: ­ Thermal shutdown
Profile selection: ­ Sport Mode:
100% fwd, 100% brakes, 100% rev.

Race Mode:
100% fwd, 100% brakes, no rev.

Training Mode*:
50% fwd, 100% brakes, 50% rev.
Single-button setup: ­ Yes, Traxxas EZ-Set
 

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Description

1:10 for brushed motors
to 15 turns
70A duration
480A short-term
6V-7.4V
NiMh LiPo & LiFe &
waterproof sealed
35.8 x 38.5 x 33 mm
62g

Description

The AE-5 ESC features include 3S LiPo capability, adjustable drag brake and its waterproof! Settings can be easily switched “in the field� between LiPo and NiMH battery types with a simple jumper – no more complex procedures!

• Jumper 1 provides a simple plug and play choice between LiPo or NiMH batteries
• Jumper 2 switches drag brake settings
• Waterproof design
• Includes Star style battery plug
• No on/off switch - power supplied by battery connection
• Laser etched heat sink

* Always remember to disconnect the battery when vehicle is not in use.

Description

Overview

 

This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.

* While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.

 

Features

  • Waterproof for all weather operation *
  • LiPo and NiMH compatible
  • Program functions changed with the use of jumper pins
  • Up to an 8T motor limit
  • Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
  • Crawler running mode
  • Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation

Description

EN-2 Micro ESC with Reverse. As standard in the Micro RS4.

Specification:

  • Input Voltage: 7.2V-8.4V(NiMH)
  • Output: Rating: 35A, Peak: 60A
  • Out max power :25A/7.2V (Max 180W)
  • Size: 23x29x18.8mm
  • Weight: 19.5g
  • BEC: 5V/1A
  • P.W.M: 1KHz
  • Motor limit :380 brushed motor [≤7.2V (6cells)]

Please note: This ESC does not have LiPo Low Voltage Cut-Off Protection, therefore it is not suitable to be used with LiPo Battery Packs.

Description

RECON

Genuine HPI quality spare part for easy maintenance and repairs.

This part fits the following kits/parts

  • RTR MINI RECON WITH 2.4GHz and SQUAD ONE BODY (EU 2-pin) 
  • RTR MINI RECON WITH 2.4GHz and SQUAD ONE BODY (UK 3-pin)

Description

Reversable speed control. Use with brushed motors down to 15 turn.

The waterproof SC-15WP electronic speed controller features a LiPo battery cut-off to make your driving time safe as well as fun! You can use a 6- or 7-cell NiMH battery, OR a 2S Lithium-Polymer battery for extra speed and power! The safety cut-off makes sure any LiPo battery isnt discharged too much, extending its lifetime while protecting your batteries!

  • Waterproof!
  • 6- or 7-cell NiMH compatability
  • 2S LiPo compatability
  • LiPo safety cut-off
  • Standard battery plug
  • Dual bullet-style motor plugs

This part fits the following kits/parts

  • RTR BLITZ SHORT COURSE 
  • RTR E-FIRESTORM 10T 
  • RTR E-FIRESTORM 10T 
  • RTR SPRINT 2 SPORT W/ 1969 CHEVROLET® CAMARO BODY 
  • RTR SPRINT 2 SPORT WITH BMW M3 GT2 BODY 
  • RTR SPRINT 2 DRIFT WITH 2010 CAMARO BODY 
  • RTR SPRINT 2 SPORT WITH FALKEN PORSCHE 911 GT3 RSR 
  • RTR SPRINT 2 WITH 1969 MUSTANG RTR-X BODY (EU)

Description

Waterproof, powerful, rugged and now even smaller than before!

The SC-3SWP2 is a powerful and durable speed controller that is fantastic for RC vehicles of all type! Whether youve got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The SC-3SWP2 is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud!

This new version 2 is smaller than the original, making it perfectly sized to fit in the tight spaces of the latest RC vehicles, whether you have a touring car racer or desert buggy!

If youve got plenty of power to strap into your RC, you can count on the SC-3SWP2 to handle it: able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.

Description

100% waterproof: The speed control is 100% waterproof and can be operated under water with full power.

LRP Automatic: With LRP´s exclusive true Automatic technology, a push button setup is completely unnecessary: Just plug-in the speedo and drive! The speed control immediately �learns” the individual transmitter setting and is perfectly set-up for every run with the correct neutral-, full speed forward- and full speed reverse transmitter settings. Whatever your car´s configuration is, the LRP True Automatic adapts to it and determines your perfect setup.

Fail Safe: Built in Fail Safe: What is Fail Safe? Another technological highlight is the factory built in Fail Safe System. �The guardian angel” of your RC car. The Fail Safe System continuously monitors the radio signals being sent to your RC car. If incomplete or �false” signals are received as a result of low batteries or radio frequency interference, your LRP A.I. Automatic Pro Reverse speed control reacts instantly and shuts off your model to protect it against damage due to interference.

Features:

LRP´s exclusive A.I. Automatic Setup
Fail Safe System
Forward/Reverse speed control
100% waterproof
German Technology
Plug-in-and-Drive
3x Multi Protection System
4, 5 and 6 cells
25 years warranty

Specifications:

Set-up Procedure automatic
Fail Safe System yes
Weight 19.0g
Size 26.0 x 26.0 x 15.7mm
High frequency yes
Motorlimit over 13 Turns
Multi-Protection-System yes
Voltage Input 4.8-7.2V
Connectors Standard Tamiya Stlye
Rated Current 80 A
forward/brake/reverse yes
Waterproof yes

LRP AI Runner Reverse V2

Description

Do you want to setup the speed control or do you want to drive your RC car? These words are mostly becoming reality, if a driver wants to setup his speedo quickly and have fun with his RC car.

The new LRP A.I. Automatic speed control line stops this unloved scenario! No button, no setup = NO PROBLEM — just plug-in an play! LRP electronic now adds yet another technological milestone to its highly successful speed control line. The innovative LRP True Automatic combines the performance of the LRP speed control with the comfort of an automatic function, adapted specially to needs of RC novices. Never has it been easier to use a professional speed control, never before have you had more time to concentrate on the actual task of driving. With the A.I. speed control line, the LRP engineers developed a completely new speedo generation with built-in artificial intelligence. These feature comes true in the product name: A.I.! LRP Automatic: With LRP´s exclusive true Automatic technology, a push button setup is completely unnecessary: Just plug-in the speedo and drive! The speed control immediately �learns” the individual transmitter setting and is perfectly set-up for every run with the correct neutral-, full speed forward- and full speed reverse transmitter settings. Whatever your car´s configuration is, the LRP True Automatic adapts to it and determines your perfect setup.

Fail Safe: Built in Fail Safe: What is Fail Safe? Another technological highlight is the factory built in Fail Safe System. �The guardian angel” of your RC car. The Fail Safe System continuously monitors the radio signals being sent to your RC car. If incomplete or �false” signals are received as a result of low batteries or radio frequency interference, your LRP A.I. Automatic Bullet Reverse speed control reacts instantly and shuts off your model to protect it against damage due to interference.

LRP A.I. Bullet Reverse digital: The bullet is the top-of-the-line speed control in the Automatic line and handles all the hottest motor of the market.

Features:

LRP´s exclusive A.I. Automatic Setup
Fail Safe System
Forward/Reverse speed control
25 years warranty
Plug-in-and-Drive
3x Multi Protection System
4, 5 and 6 cells

Specifications:

BEC / Electric power supply of the receiver 5.0V
Set-up Procedure automatic
Fail Safe System Yes
Weight 51.0g
Size 42.5 x 42.5mm
High frequency Yes
Motorlimit no motorlimit
Multi-Protection-System Yes
Voltage Input 4-7 cells (4.8-8.4V)
Connectors Standard Tamiya Stlye
Rated Current 225A
Typical Voltage Drop @20A 0.048V
forward/brake/reverse Yes

Description

The MSC-30BR-WP is a durable speed controller that is suitable for RC vehicles of all type! Whether youve got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more. The MSC-30BR-WP is also fully waterproof, making it the a great choice for anyone who enjoys playing in wet conditions.

The MSC-30BR-WP can handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, and features a safety cut-off to protect your LiPo batteries. 

Features

  • 2S or 3S LiPo with voltage protection
  • 5-9 cell NiMH or NiCd
  • Suitable for all types of 1/10th scale vehicles

Specification:

  • Forward Continuous Current: 40A
  • Forward Burst Current: 180A
  • Reverse Continuous Current: 20A
  • Reverse Burst Current: 90A
  • Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
  • Applications: 1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat
  • Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great than or equal to 12 turn, RPM over 30,000 at 7.2v
  • Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great than or equal to 18 turn, RPM over 20,000 at 7.2v
  • Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
  • PWM Frequency: 1 KHz
  • Dimensions: 46.5x34x28.5mm
  • Weight: 65g

Description

The EVX-2 delivers an incredible 16-plus volts, from two battery packs, making 16.8-volt, twin-motor setups more powerful than ever! Designed by Traxxas, the EVX-2 features a completely waterproof design, three drive profiles, Thermal Shutdown Protection, and gold-plated Traxxas High-Current Connectors. The EVX-2 also includes patent-pending Training Mode.™ This profile reduces the overall power output of the EVX-2 by 50% making it easier for young/new drivers to develop their control skills before unleashing full-power operation. EVX-2 is equipped with two-stage low voltage detection (LVD) to allow LiPo battery use. The EVX-2 is manufactured by Traxxas to ensure the highest level of quality and support.

The EVX-2 uses Traxxas exclusive EZ-Set push-button set-up and a multi-colored LED making it a snap to adjust. Its microprocessor control has three built-in programming modes including: Sport Mode with forward, brakes, and reverse; Racing Mode with forward, brakes, and no reverse; and the exclusive Training Mode™ that limits forward and reverse power by 50% while still applying 100% brakes. Built-in thermal shutdown protection adds an extra level of safety. Sophisticated, high-frequency operation and low internal resistance provide longer run times, more speed, and more fun!

The exclusive Training Mode™ limits full throttle output to 50% making it easier for new or young drivers to develop their control skills. With the high-frequency efficiency of the EVX-2, run time is also greatly increased. When theyre ready, simply change profiles to unleash full-throttle action. Only Traxxas has it!

EVX-2 Waterproof ESC Features

■Built-in two-stage low voltage detection (LVD)
for Lithium Polymer (LiPo) battery use
■16.8 Volts of Power
■Waterproof Design
■Microprocessor Controlled
■Traxxas High-Current Connectors
■Three Drive Profiles
■Patent-Pending Training Mode
■EZ-Set® Push-Button Set-Up
■Thermal Shutdown Protection
■For Traxxas E-Maxx®, E-Revo® and Summit

EVX-2 LVD (WATERPROOF) SPECIFICATIONS

Input voltage: ­ 6-14 NiCad and NiMH cells (7.2 to 16.8 volts DC)
4-cell LiPo (14.8 volts DC)

Case Size: ­ 2.27W x 2D x 1.05H

Weight: ­ 3.6 ounces

Motor Limit (540 size): ­ 10-turns

Motor Limit (550 size): ­ 12-turns

On-Resistance­ (@Trans)–FWD/REV: ­ 0.004 ohms / 0.004 ohms

Rated Current–FWD/REV: ­ 180 amps / 180 amps

Braking Current: ­ 360 amps

Continuous Current (at 100°F amb.): ­ 30 Amps

Reverse Delay: ­ None

BEC Voltage: ­ 6.0 volts DC

BEC Current: ­ 2.5 amps

Power Wire: ­ 14 Gauge / 3

Input Harness Wire: ­ 26 Gauge / 9.5

Motor Wires: ­ 14 Gauge / 4

Transistor Type: ­ MOSFET

PWM Frequency: ­ 1700 Hz

Thermal Protection: ­ Thermal shutdown

Profile selection: ­ Sport Mode:

100% fwd, 100% brakes, 100% rev.

Race Mode:
100% fwd, 100% brakes, no rev.

Training Mode*:
50% fwd, 100% brakes, 50% rev.
Single-button setup: ­ Yes, Traxxas EZ-Set
 
EVX-2 LVD (WATERPROOF) SPECIFICATIONS
Input voltage: ­ 6-14 NiCad and NiMH cells (7.2 to 16.8 volts DC)
4-cell LiPo (14.8 volts DC)
Case Size: ­ 2.27W x 2D x 1.05H
Weight: ­ 3.6 ounces
Motor Limit (540 size): ­ 10-turns
Motor Limit (550 size): ­ 12-turns
On-Resistance­ (@Trans)–FWD/REV: ­ 0.004 ohms / 0.004 ohms
Rated Current–FWD/REV: ­ 180 amps / 180 amps
Braking Current: ­ 360 amps
Continuous Current (at 100°F amb.): ­ 30 Amps
Reverse Delay: ­ None
BEC Voltage: ­ 6.0 volts DC
BEC Current: ­ 2.5 amps
Power Wire: ­ 14 Gauge / 3
Input Harness Wire: ­ 26 Gauge / 9.5
Motor Wires: ­ 14 Gauge / 4
Transistor Type: ­ MOSFET
PWM Frequency: ­ 1700 Hz
Thermal Protection: ­ Thermal shutdown
Profile selection: ­ Sport Mode:
100% fwd, 100% brakes, 100% rev.

Race Mode:
100% fwd, 100% brakes, no rev.

Training Mode*:
50% fwd, 100% brakes, 50% rev.
Single-button setup: ­ Yes, Traxxas EZ-Set