The Tiger 3, featuring a semi symmetrical wing section, makes this ARF quite simple to fly and will have you headed in the right direction to becoming an expert flyer. The Tiger 3 is all Balsa and Plywood construction. All the necessary hardware is included (servo wire, fuel tank, wheel/landing gear, etc). You simply require an engine (or an electric motor) and a radio system.

Features:

• Designed for compatibility with both GP and EP flight
• Strong Light Weight Construction
• High-quality hardware package included

Specifications:

• Wingspan: 1600mm (63in)
• Length: 1360mm (53.5 in)
• Flying weight: 2500-2700 gr
• Wing area: 42.8 dm2
• Wing loading: 60g/dm2
• Wing type: Naca airfoils
• Covering type: V-kote film
• Spinner size: Plastic 58mm (included)
• Radio: 4 channel minimum (not included)
• Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
• Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
• Servo mount: 21mm x 42 mm
• Propeller: suit with your engine
• Engine: .46-.55 / 2-stroke (not included)
• Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
• Gravity CG: 75-85 mm (2.9-3.3 in) Back from the leading edge of the wing, at the fuselage
• Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
• Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
• Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
• Experience level: Intermediate
• Plane type: Low wing sport

Recommended Motor and Battery Set Up:

• Motor: .46 (not included)
• Lipo cell: 6cells / 4000-5000mAh (not included)
• Esc: 50-70A (not included)

(PHN-PH036)

SKU PHN-PH036
Barcode # DOESNOTAPPLY
Brand Phoenix
Power Source Electric
Level of Completion Almost Ready to Fly

Be The First To Review This Product!

Help other Frontline Hobbies users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category