TAMIYA 1/10 Opel Calibra V6 RC On Road (TA02)

Tamiya welcomes back a classic model into the R/C line-up with this limited edition re-issue of the Opel Calibra V6 that took part in the 1994 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing, the car was powered by a 2.5- litre V6 engine and piloted among others by former Formula One champion Keke Rosberg.
1/10 scale R/C assembly kit. Length: 448mm, width: 185mm, height: 131mm. Wheelbase: 260mm.
The bulky 1990s form of the Calibra V6 is captured in style by a polycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing.
The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame.
Openable gearboxes house a front 3-bevel gear differential and rear ball differential.
TA02 features 4-wheel double wishbone suspension and CVA dampers for smooth, responsive handling.
White mesh type wheels are paired with slick tyres.
Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint job.

Get some 1990s touring car action with this welcome return for the Opel Calibra V6 to the Tamiya R/C model line-up! The 1994 model’s stylish, bulky 2-door body is recreated in polycarbonate with separately molded side mirrors, wiper arms and rear wing, and two big sticker sheets to decorate it. 1994 DTM Opel Calibra This is a R/C recreation of the Opel Calibra V6 that took part in the 1994 running of the Deutsche Tourenwagen Meisterschaft (DTM) series.

Entered by Joest Racing, the car was powered by a 2.5-liter V6 engine and piloted among others by former Formula One champion Keke Rosberg.

The Limited-Edition kit is an exact re-release of the original as it appeared in the mid-1990’s.

The polycarbonate body captures the bulky form with separate parts recreating the side mirrors, etc.

Two big sticker sheets recreate the various sponsors and other markings.

Masking stickers are also included. TA02 bath-tub chassis provides shaft-driven 4WD, 4-wheel double wishbone suspension, front and rear gear cases with built-in diff gears & rear ball diff.

FeaturesPolycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing.

The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame.

Openable gearboxes house a front 3-bevel gear differential and rear ball differential.

The TA02 features 4-wheel double wishbone suspension and CVA shock-dampers for smooth, responsive handling.

White mesh type wheels are paired with slick tires.

Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint process.

Includes 540-brushed type motor.

Includes ESC.

Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.

SpecificationsAdjustable Gear Ratio: Yes.

Bearings: Plastic bushing.

Body Material: Polycarbonate.

Body Stickers: Included.

Chassis Material: ABS Plastic.

Chassis Type: TA-02.

Construction Type: Assembly Kit.

Differential Type: Gear.

Drive Type: 4WD.

Electronic Speed Control (ESC).

Motor: 540-brushed type.

Scale: 1/10.

Shock Damper: CVA Oil Filled.

Suspension: 4-wheel fully independent double wishbone.

Terrain Use: On-Road.

Included itemsDescription. QTY. 1/10 TA-02 Opel Calibra V6 4WD Electric On Road RC Car Kit. 1.

Required Items2Ch Radio System (Transmitter & Receiver) & Batteries.

Compatible Battery Pack & Charger.

Servo.

Please Note: This body shell comes completely UNPAINTED and may or may not require body post holes to be drilled.

Only use a polycarbonate style paint such as The Tamiya PS series to finish these bodies, as standard paints will not adhere and/or cause damage to the body shell's surface.