Skip to content
Australia's Largest Hobby Retailer

Rock Crawlers

Axial 1/10 EP SCX10 Deadbolt 4X4 RTR 2.4GHz AX90044 Axial 1/10 EP SCX10 Deadbolt 4X4 RTR 2.4GHz AX90044
$499.99
In stock

Description

This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run SCX10 Deadbolt Rock Crawler Truck Kit from Axial.

FEATURES

Chassis: Scale steel C-channel with cross bracing for reinforcement
and assembled with hex hardware
Drive: 4 wheel shaft with WB8 wild boar driveshafts and constant
velocity joint design
Diff Locker: One-piece sintered metal construction reduces slop in
drive train by eliminating cross pin
Radio: AX-3 2-channel 2.4GHz with high torque 151 oz/in metal gear
Tactic TSX45 servo
ESC: AE-5 LiPo compatible with forward, reverse and drag brake
function, waterproof and 3S LiPo compatible
Motor: 27T brushed motor
Pinion Gear: 32 pitch
Shocks: Oil filled single rate with realistic looking non-functional
coilover shock reservoir, plastic body
Transmission: Designed to place motor weight as low as possible
to maintain a low CG, adjustable ratio from 15:1 - 74:1, dual
slipper clutch with 32 pitch gearing for high torque applications
allows transmission to slip in hard binds
Body: Deadbolt style with painted hood cowl, interior, scale helmet,
decals and fuel cell
Wheels: 1.9 wide Walker Evans, nylon construction, black in
color, 12mm hex
Tires: Maxxis Trepador R35 sticky compound 1.43 (36mm) wide, 4.6
(117mm) diameter
Rear Suspension: 4-link optimized to reduce axle steer and torque
twist
Front Bumper: Officially licensed Poison Spyder Rock Brawler with
 functional D Rings, and mounting holes for LED lights (lights not
 included)

INCLUDES

RTR SCX10 Deadbolt, 2-ch 2.4GHz radio, ESC, 27T Motor, Instruction Manual, sheet of decals

REQUIREMENTS

Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 2-3S LiPo pack
Battery Charger: Compatible with selected battery

SPECIFICATIONS

Length: 18.1 (460mm)
Width: 8.8 (225mm)
Height: 9 (229mm)
Wheelbase: 12 (305mm)
Ground Clearance: 2.7 (68mm)
Weight: 4.65lb (2.1kg)

Axial 1/10 EP SCX10 II 2000 Jeep Cherokee Kit 4WD Axial 1/10 EP SCX10 II 2000 Jeep Cherokee Kit 4WD
$539.00
In stock

Description

2005 marked the birth of the Axial brand, and shortly after, thoughts about the first SCX10 began, with development wrapping up in 2008. The SCX10 was introduced to the world as a builders kit, paving the way, or better yet, raising the bar for a new generation of scale trail enthusiasts. Previously, hobbyists had to scratch build a rig which presented a lot of technical hurdles to overcome. The SCX10 kit gave these artists time to focus their attention on other things like personalization and visual customization by removing the issues scratch-built scale rigs presented. And, it wasn't just as a great kit to build, it was also a very capable driving machine, making it the de facto scale rig the world over. The SCX10 chassis platform provided all the technical attributes as well as scale looks with its signature all-metal twin c-channel frame, solid performing transmission and axles that provided enough realism with capabilities to match.

With the SCX10 II, we've kept essence of the SCX10 there with all-metal twin c-channel frame rails, but that's only 2% of the 98% of a completely new design. Scale AR44 high pinion axles, a chassis mounted servo (CMS), re-designed transmission, front mounted battery tray, all aluminum suspension links, and a properly designed suspension for nearly zero bump steer. These are just a few of the features built into the all new SCX10 II.

AR44 HI-PINION AXLES
In 2008, the AX10 axle was used in the launch of the SCX10 chassis platform. While developing the next iteration of axles such as the AR60, the thought process began on what kind of axle would be best for the future of the SCX10. Axials development of a new axle needed to feature three key design points. First, an axle housing to visually quench the thirst of scale enthusiasts. Second, a gear set with the technical attributes to overcome the torque twist often associated with smaller gear sets. Third, the axle itself needed to retain the durability associated with the SCX10, despite being delivered in a smaller axle housing. After seven years of utilizing the original AX10 axle and two years of development, Axial is proud to introduce our newly developed AR44 axle with the industrys first high pinion gear set. The next chapter of the Axial SCX10 begins with scale realism backed with true technological development!

High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
Single piece axle housing for added strength
1-piece all-metal locker front and rear
Small pumpkin for increased clearance and a more realistic, scale look
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio – 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs

Axial 1/10 EP Wraith Spawn Kit 4x4 AX90056 Axial 1/10 EP Wraith Spawn Kit 4x4 AX90056
$469.99
Available to order

Description

The Axial Wraith Spawn kit version is packed with performance features and option parts that you add as you build it. The virtually bulletproof AR60 OCP axles are ready to take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The 2.2 Maxxis Trepador tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or backyard bashing, the Wraith Spawn is ready for action.

FEATURES

Chassis:Full tube composite construction with composite skidplate
Drive:Four wheel shaft with WB8 HD Wildboar 3-piece driveshafts
with captured cross pin design eliminating older set screw design
hardened steel universal joints increase steering angle by 10°
over stock dogbone/drive cup setup
Axles:AR60 OCP (Off-Center-Pumpkin) high-strength composite design
Transmission:Steel output gears and dual slipper clutch equipped
Differentials:Locked type with easy access for rebuilding and
maintenance
Spur Gear:Molded composite plastic 32 pitch, 56 tooth
Suspension:Four link optimized to reduce axle steer, machined
aluminum lower suspension links reduce flex and provide precise
control over rough terrain
Shocks:Icon Vehicle Dynamics aluminum body
Receiver Box:Waterproof
Cockpit:Lexan interior with molded driver figure
Battery Tray:Sized for 6-cell 7.2V standard stick packs or 2S LiPo
pack up to 1.8 (47mm) wide, 5.9 (150mm) long, 1.1 (28mm) high
Tires:2.2 (56mm) diameter Maxxix Trepador in S30 compound and
multi-stage staggered shoulder pattern for improved control, foam
inserts also included
Wheels:Three piece Method IFD 12 spoke beadlock with updated hub
adapter that uses standard 12mm hex
Body:Clear polycarbonate Wraith Spawn

Axial 1/10 Poison Spyder Jeep Wrangler Wraith RTR AX90031 Axial 1/10 Poison Spyder Jeep Wrangler Wraith RTR AX90031
$599.99
In stock

Description

Based on a long standing relationship between Axial, Jeep® and Poison Spyder, this Jeep® Wrangler Wraith is the culmination of efforts between these three iconic off road lifestyle brands.


Ultra4 Racing combines the best of both off road racing worlds including high speed desert action and hard core rock racing. The Axial Jeep® Wrangler Wraith appeals to fans of this event series because it offers some of the same spectacular abilities. Featuring a full tubular chassis and a detailed interior just like the full size counterparts, the realism offered by this vehicle is second to none. The livery is a virtual replica of the amazing machine that the talented crew at Poison Spyder Racing have constructed just for the Ultra4 series.

AXIAL WRAITH ROCK RACER

The Jeep® Wrangler Wraith is ready for rock spitting, dirt slinging, action. Its designed to tackle the rocks with ease and blast across open desert at full attack speed. The bottom line, the Wraith is tough as nails and prepared for any terrain.

FULL TUBE FRAME COMPOSITE CHASSIS

The Jeep® Wrangler Wraith - Poison Spyder 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith IS BUILT TO GO FAST and is not just a low speed rock crawler.

BUILT FOR PERFORMANCE

The Jeep® Wrangler Wraith is built with traditional straight axles allowing for maximum suspension articulation. This vehicle features differential lockers front, center and rear just like its full size counterpart. With lockers and maximum articulation, there isnt anywhere you cant take this rock racing machine!

TRAIL READY HD SERIES IFD BEADLOCK WHEELS

Officially licensed Trail Ready HD Series beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. Serrated wheel nuts provide plenty of bite to keep the wheel securely in place and theyre anodized blue for great looks!

BFGOODRICH KRAWLER T/A® KX TYRES

Officially licensed BFGoodrich Krawler T/A® KX tires! In the full-size offroad world, they are the winner of more rock-crawling championships than all other tyres combined (Race spec tire, Years 2004 through 2008). The Axial version captures the same aggressive look you've been waiting for.

AXIAL AR60 OCP-AXLE (OFF-CENTRE PUMPKIN DESIGN)

True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle. A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws to gain access for rebuilding and performance tuning as well.

REALISTIC SCALE DETAILS

The Wraith is packed with a variety of realistic details like a steering wheel, shifters, a molded polycarbonate interior, molded seats and a full roll cage molded in tough nylon injected plastic for durability.

WB8 WILD BOAR DRIVESHAFTS

Metal to metal universal joint driveshaft system with splined plastic slider. This design provides more durability than traditional driveshaft designs because it uses a screw shaft for a more positive lock to the output shaft.

- Constant Velocity Joint Design [CVJ]
- Full Metal-To-Metal Construction for the CVJ-Housing
- Friction Free Movement / Smooth Articulation
- Tough-as-Tusk Durability
- Easy Assembly & Maintenance

4-LINK SUSPENSION

The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.

TUNED SHOCK SPRINGS

Finding the right spring rate can be tough. Axial made it easy for you by including what we found to be the right balance of high speed and harsh terrain handling. The softer spring rate keeps the Wraith on course and ready for your next obstacle!

SLIPPER CLUTCH

Allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.

PROTECTIVE TRANSMISSION COVER

Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drive train.

ALL HEX HARDWARE

All hex hardware for easy assembly. No Philips screwdrivers required!

FULL TUBE FRAME COMPOSITE CHASSIS

The most realistic high strength composite tube frame chassis. Based on the Night Stalker II Chassis built by Jake Hallenbeck. Our high strength composite plastic is impact resistant to help protect the Wraith from crash damage.

BATTERY TRAY

Battery tray for Standard Stick Pack and LiPo Packs Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size. No disassembly or tools needed to remove and replace the battery.

DURABLE SKID PLATE

The skid plate protects the transmission and other critical components while providing a flat surface to help the Wraithâ„¢ slide over rocks or other obstacles.

OFFICIALLY LICENSED BODY

Our partnership with Jeep® continues with an officially licensed Jeep® Wrangler body, wrapped in officially licensed Poison Spyder graphics.

VERTICALLY MOUNTED ESC

The ESC is held in place vertically by a secure, clip-in style plastic mounting system just behind the radio box. Facing the rear of the truck helps keep debris and water away from the ESC.

AE-2 ESC WITH DRAG BRAKE

The Axial AE-2 ESC was developed in partnership with Castle Creations and features LiPo cutoff, drag brake for tough crawling situations, a Tamiya style plug connector and is programmable via Castle Link (Castle Link not included).

AR-3 2.4GHz RECEIVER

AR-3 2.4GHz receiver - no crystals required.
No frequency conflicts for worry-free driving.
Bind button and LED indicator makes setup easy!
3-channel.
Lightweight, compact size.

20T MOTOR

Tear up the terrain, be it flat out desert, rocky roads or crawling! Easy operation: no tuning, no fuel, no loud exhaust noise. Just plugngo! Our design allows for optional 550 size motors to fit as well.

PROTECTIVE ELECTRONICS BOX

Designed to protect the electronics from some serious off-road dust and debris. Please visit our blog for more information on waterproofing electronics.

AX-3 2.4GHz TRANSMITTER

2.4GHz, 2 channel pistol grip radio.
Servo reversing switches for steering and throttle.
Trim dials for fine tuning steering and throttle centers.
Battery indicator light lets you know when your transmitter batteries run low.

THE MOST VERSATILE PLATFORM

The Axial Wraith changes the game with its impressive 1:1 scale looks, high-speed monster truck bashability, and technical crawl capabilities. The Wraith is the most versatile vehicle satisfying the needs of a wide range of enthusiasts.

Requires

Battery & charger.

Axial 1/10 RR10 Bomber Electric 4WD - RTR Axial 1/10 RR10 Bomber Electric 4WD - RTR
$699.99
$579.00
Available to order

Description

Axial R/C Inc. is extremely pleased to partner with Randy Slawson, Bomber Fabrication's owner and two-time King of the Hammers rock racing champion! For this rig, we took everything we learned from building the industry's first all plastic tube chassis rig and drew upon mountains of inspiration from enthusiasts to go next level! The Axial RR10 Bomber is not just another plastic tube chassis Wraith update - it merely adds to our line of successful 2.2 rock racing vehicles. While visually this rig is a race replica of the Bomber Fab KOH rock racing rig, one of the unseen features is the front mounted battery tray under the hood making for easy access and weight right where you asked for it! This makes swapping the batteries in this rig a quick and easy process, especially for those enthusiasts participating in the ultra endurance series within Axialfest! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10â„¢ specific transfer case for optimal driveline efficiency. We've also included a full set of BFGoodrich® BAJA T/A® KR2 tires along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels. Weve included a variety of shock mounting points for running dual shock setups and more suspension tuning options. For additional rear suspension tuning, youll find a sway bar mount connected to the cage, under the fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Standard features include durable front and rear WB8 HD Wildboar driveshafts, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears, a 3-channel radio system, realistic scale details including molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels and graphics, and a fully licensed scale tube chassis.

FEATURES
BFGOODRICH® BAJA T/A® KR2 TIRES - S30 COMPOUND
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the go-to tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial's version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
KING ADJUSTABLE ALUMINUM SHOCKS
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
FORWARD MOUNTED EASY ACCESS BATTERY TRAY
Remove two body clips to release the front hood for access to the adjustable battery compartment. The compartment features ample room for securing 2S/3S LiPo batteries.
EASY ACCESS TO ELECTRONIC COMPONENTS
All electronics are routed and part of skid plate assembly. Simply drop the skid plate and remove the shocks at the chassis to gain access to the electronic components.
DUAL SHEAR SHOCK MOUNTS
All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
MULTIPLE SHOCK/LINK POINTS AND SWAY BAR MOUNT
Weve included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate youll find two front upper link mount positions and three rear upper link mount positions. For additional rear suspension tuning, youll find a sway bar mount connected to the cage, under the fuel cell. Optional sway bar sold separately (AX31331).
SCALE DETAILS
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three pairs of black styrene helmets (motorsport, open skull-face and motocross), scale molded shock reservoirs, fuel cell, and RR10 licensed Bomber Fabrication scale tube chassis.
FULL TUBE FRAME COMPOSITE CHASSIS
The most realistic high strength composite tube frame chassis. Our high strength composite plastic is impact resistant to help protect the RR10 from crash damage.
OPTIMIZED DRIVELINE EFFICIENCY
The YETI style transmission with RR10 specific transfer case bolts directly onto the skid plate allowing for proper driveshaft alignment required with AR60 axles.
HI-LO TRANSMISSION AND DUAL SLIPPER CLUTCH. INDUSTRY PROVEN DURABILITY, AND BRUSHLESS READY!
With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
AR60 OCP-AXLE
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.

Off-center pumpkin design
Axle tubes are reinforced with a boxed-in axle truss
High strength composite material
Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
Updated differential cover and servo mount for new look
REAR OUTPUT DIFFERENTIAL COVER
Included with the kit but not installed, the AR60 rear output differential cover enables the opportunity to build multi-axle vehicles without costly modifications.

If youve already got a Yeti, Wraith or AX10 with AR60 axles, you can purchase this optional RR10 AR60 Axle Component Set separately (AX31317) which includes link mounts for optional shocks to be installed up front, and mounts for an optional rear sway bar.
WB8 HD WILDBOAR DRIVESHAFTS, FRONT AND REAR
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

3-piece driveshaft with strengthened slider-floater tube.
Increased surface at the connection between the ball joints and output shaft tubes.
2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
STRONGER STEERING KNUCKLES
Featuring a new design specifically for the AR60 front axle, weve updated the old knuckles by removing the steering arms and weve made them stronger by adding more material and gave them an updated, more refined look.
2.2 WALKER EVANS RACING WHEELS
Officially licensed Walker Evans Racing wheels dressed in an aggressive all black style and they work with most 2.2 tires.
SPARE TIRE AND MOUNT
Bolted onto the back is an included BFGoodrich® BAJA T/A® KR2 and Walker Evans 2.2 wheel/tire combo with a quick release spinner for mounting.
RECEIVER BOX WATERPROOF
The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
TACTIC 3-CHANNEL 2.4GHz RECEIVER
The Tactic TR325 2.4GHz receiver uses no crystals and features an internal antenna, so youll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!
35T BRUSHED MOTOR WATER RESISTANT
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan allowing for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug n go!
TACTIC TTX300 3-CHANNEL SLT RADIO
Sport-level racers and bashers will appreciate the TTX300s many popular features, along with its amazing adjustability. It features a programmable 3rd channel making for incredible versatility; it can operate functions such as two-speed shifting, winches and lights, making it ideal for a vast array of opportunities. Need more reasons? Theres SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter with push-button ease.
AE-5 ESC WATERPROOF

The Axial AE-5 ESC is 3S LiPo capable yet easily switched in the field between LiPO and NiMh battery types with a simple jumper no more complex procedures.

Male Star Plug lead - compatible with the most common polarized plug in RC.

Jumper 1 provides a simple plug and play choice between LiPo or NiMh.

Jumper 2 switches Drag Brake settings.

Waterproof design with waterproof On/Off switch / Star Plug / laser etched heat sink.

Axial 1/10 SC10 2017 Jeep Wrangler RTR 4WD Axial 1/10 SC10 2017 Jeep Wrangler RTR 4WD
$649.00
Out of stock

Axial is constantly moving forward in an effort to maximize performance and detail for scale enthusiasts. The SCX10™ II 2017 Jeep® Wrangler Unlimited CRC edition is a perfect example of that union, matching unparalleled trail-ability with stunning good looks.

Some of the specialized parts we've included are CRC front and rear bumpers, unique rock rails with additional body-mounting points, molded front and rear fenders and a CRC-inspired hood. Additional external scale features consist of molded side mirrors, door handles, windshield wipers, hood latches and a full set of lights (six in total) that mount into a realistic front radiator/light bucket combo.

The 2017 Jeep® Wrangler Unlimited CRC edition builds on the wildly popular SCX10™ II chassis, a proven platform that includes unique features that have made this truck a top performer in its class. High-clearance AR44 high-pinion axles, a chassis mounted servo (CMS), re-designed AX10 transmission case and tough steel suspension links are just a few of the performance parts tucked away under the detailed Jeep® Wrangler Unlimited body.

SCALE DETAILS INCLUDED!

The SCX10 II 2017 Jeep Wrangler CRC Edition includes realistic molded scale detail parts such as a molded plastic radiator with LED light holders for head lights and turn signal markers, side mirrors, door handles, plastic hood latches, wipers, CRC front and rear bumpers, rock rails, stylish front and rear fenders, and rear LED holders with red tail light lenses.

 

FEATURES

 

  • CRC licensed parts
  • LED lighting
  • C-channel chassis
  • Full time 4wd
  • WB8 HD Wild Boar driveshafts
  • AX10 three gear transmission
  • Dual pad slipper
  • 35 turn brushed motor

 

 

REQUIRES

 

  • Battery & Charger
  • (4) AA batteries for transmitter

 

Axial 1/10 SCX10 2012 Jeep Wrangler Unlimited C/R Ed RTR AX90035 Axial 1/10 SCX10 2012 Jeep Wrangler Unlimited C/R Ed RTR AX90035
$649.99
Available to order

Description

Axial is constantly working toward bringing to market the latest and coolest scale trail rigs. The Jeep® Wrangler has become a staple in the Axial line up. Jeep® brand vehicles are unique in that the 1:1 marketplace offers a tremendous amount of accessories to customize your Wrangler platform.

Axials latest offering is a Jeep® Wrangler Unlimited Rubicon featuring components that are considered the hottest in the aftermarket arena. Rigid Industries is one of the most popular companies supporting the Jeep® aftermarket and their LED lighting products are some of the most sought after upgrades. For this product, Axial has included a pre-installed, scaled down 50 E-Series light bar along with scaled down versions of the wildly popular Rigid Dually lights. All of the Rigid lighting is functional featuring 10 working LEDs.

Axial has also teamed with Casey Currie to bring this latest Jeep® to market. Casey is one of those iconic individuals who lives and breathes the Jeep® brand. Having grown up exploring the back roads within the legendary Currie family, Casey embodies the Axial lifestyle to a T. When he isnt out racing his short course truck, riding his dirt bike or rock crawling his JK, hes busy wrenching on and driving his Axial rigs. His latest venture is a brand called CRC. The CRC message is fun whether cruising, racing or crawling Jeep® brand vehicles. You can expect many great things from Casey and the CRC brand for your full size Jeep® in the near future!

Casey Currie is one of the most successful young off-road racers on the scene today. When he isnt out on the track putting down lightning fast times, hell be out exploring the back roads with his Jeep® Wrangler. So its no surprise that hes started his own brand around his adventurous lifestyle. A brand called CRC. CRC stands for cruise it, race it, crawl it, and embodies everything he does with his Jeep® brand vehicles.

Features

RIGID INDUSTRIES LIGHT BARS
Rigid Industries is on the forefront of new off-road lighting technology. Their LED light bars have revolutionized the entire off road lighting industry. A favorite choice for Jeep® Wrangler owners, the 50 E-Series roof mounted light bar, and a pair of Rigid Dually lights compliment the C/R edition Jeep® Wrangler perfectly. A total of 10 forward facing bright white LEDs are installed to light the way for those after hours trail runs. Two additional Rigid bars are included in the box, just add some LEDs and hit the trail! (additional LEDs sold separately)

CRC EDITION BLACK ROCK WHEELS
One of the first products from the Casey Currie brand are these awesome CRC edition Black Rock Wheels. Youll always find Casey running Black Rock Wheels whether he is cruising, racing or crawling. The flat black finish combined with their great strength make them the perfect addition to the Axial C/R edition Jeep® Wrangler.

1.9 BFGOODRICH KRAWLER T/A KX TIRES
In the full-size offroad world, they are the winner of more rock-crawling championships than all other tires combined (Race spec tire, Years 2004 through 2008). The Axial version captures the same aggressive look you've been waiting for in Trail/Comp sticky R35 compound. BFGoodrich® Tires and KRAWLER T/A® Trademarks are used under License from Michelin

METAL GEAR TACTIC SERVO, 151 oz-in
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

EXTENSION WIRING HARNESS
Wiring for the lights is neatly strung under the body and the included extension wiring harness makes it easy to remove the body when you need to get under the hood.

POISON SPYDER ROCK BRAWLER BUMPER
Officially Licensed Poison Spyder Rock Brawler front bumper adds realism and functionality. The bumper features functional D-Rings for realistic recoveries, mounting holes for LED lights and an excellent approach angle to tackle extreme terrain.

REAR BUMPER W/SWING OUT CARRIER
The Poison Spyder Rock Brawler rear bumper includes a realistic swing out tire carrier and quick release spinner for mounting the spare tire, two hooks for connecting D Rings and two holes for LED lights (LED lights not included - optional AX24257 Simple LED Controller sold separately).

POISON SPYDER CRUSHER FLARES
Offroading puts your vehicle right in the middle of conditions where durability matters most. The Poison Spyder Crusher Flares help protect the body from impacts and they're designed for additional tire clearance and an aggressive look.

Some other features include

  • 27T brushed motor
  • 4 Link rear suspension
  • Ultra compact Transmission placed for a low center of gravity
  • Slipper clutch and protective spur gear cover
  • Rock sliders
  • Metal frame realistic c-channel chassis
  • Adjustable Coilover Shocks
  • Heavy duty diff locker
  • 2.4ghz radio gear
  • Lipo compatable ESC with Drag Brake (tamiya plug)

Required to complete
7.2v NiMH or 7.4v LiPO Battery
Charger to suite battery
4 AA Batteries for transmitter

Axial 1/10 SCX10 2012 Jeep Wrangler Unlimited Rubicon AX90028 Axial 1/10 SCX10 2012 Jeep Wrangler Unlimited Rubicon AX90028
$639.99
Available to order

Description

This car requires a battery and charger to be purchased separately.

TRAIL PROVEN PERFORMANCE
Axial has joined forces with the most recognized name in off-roading - Jeep®. The SCX10 Jeep® Wrangler Unlimited Rubicon was designed to resemble its full sized scale/1:1 counterpart. We really did our research with this vehicle by building a full scale version for testing, research and development. We wanted to make sure you'd get the best built SCX10, right out of the box.

GO OVERLAND, DO EXPEDITIONThe SCX10 also includes a rock solid, proven durable transmission with a protective cover to keep dirt and debris out of your pinion and spur gear and an adjustable slipper clutch that allows the motor to work more efficiently which greatly enhances the durability of the drivetrain by allowing the transmission to slip in hard binds. The SCX10 mates the transmission and axles to an even more realistic or scale metal c-channel frame. The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic shock hoops with multiple shock mounting positions allow you to adjust your suspension for maximum performance.

SCALE REALISM
The SCX10 also runs true to scale wheels and tires. We've included a set of officially licensed Maxxis Trepador tires molded in our R35 sticky compound which offers superior grip and they're mounted on two-tone Walker Evans Racing wheels for great looks! The SCX10 Jeep® Wrangler Unlimited Rubicon is designed for fun, especially if you have a few friends that have scale rigs. Getting a few guys together and going out for a scale trail run is one of the most enjoyable things you can do if youre an avid off-roading enthusiast. The SCX10 Jeep® Wrangler Unlimited Rubicon is a 1:10 scale rig that provides full scale fun!

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. It also helps with steep off-camber climbs by having the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.


The axles have been designed with many features that are not available from other products on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration when designing these axles. The result is a far superior axle that will stand up to some severe punishment. To ensure added longevity from the start a hi-tolerance sintered diff locker is included along with hardened axle shafts.

TRANSMISSION
The transmission was designed to place the weight of the motor as low as possible to maintain a low CG (Center of Gravity). The ultra compact transmission doesnt compromise performance because it also allows for a wide range of gearing choices. The overall ratio can be adjusted from 15:1 all the way up to 74:1 using different pinion/spur gear choices which allow for super high speed or to competition level crawling speed.

METAL FRAME CHASSIS
The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness). Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance. The simplified design makes maintenance and assembly quick and easy. The contoured skid plate significantly reduces hang-ups on terrain.

Axial 1/10 SCX10 II 2000 Jeep Cherokee Electric 4WD – RTR Axial 1/10 SCX10 II 2000 Jeep Cherokee Electric 4WD – RTR
$629.00
In stock

Description

The SCX10 has been the vehicle of choice for scale trail fun! For the past 8 years the SCX10 has been the staple vehicle platform for scale trail enthusiasts around the world. Axial was one of the first companies to embrace R/C rock crawling and the first to mass produce a scale trail truck. Axial has been watching trends, tirelessly testing, and experimenting to create the next evolution of the SCX10. The SCX10 II is the culmination of many years of development, furthering aesthetic realism while maximizing trail performance. The next generation of SCX10 is here!


High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
Single piece axle housing for added strength
1-piece all-metal locker front and rear
Small pumpkin for increased clearance and a more realistic, scale look
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs


RECEIVER BOX, WATERPROOF
Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

Waterproof receiver box located on the side plates allows easy access and low center of gravity

WIRE ROUTING
Wire routing has been thoroughly thought through to help keep your chassis layout looking clean. In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.

Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo

RECOMMENDED TERRAIN

Terrain_rocky_48x68
Terrain_mountainous_48x68
Terrain_offroad_48x68
REQUIRED ITEMS (not included)
Required_48x68_battery
Required_48x68_charger
Required_48x68_aa_batteries
Battery: 2S or 3S LiPo pack, or NiMH pack (batteries not included)
Axial 1/10 SCX10II Trial Honcho RTR RTR 4WD Axial 1/10 SCX10II Trial Honcho RTR RTR 4WD
$549.00
In stock

The SCX10™ II Trail Honcho™ is the reliable choice for scale trail fun! For the past nine years the SCX10™ has been the staple vehicle platform for scale trail enthusiasts around the world. When it’s you, the trail and your rig, you want the tried, and true. You want real world community tested, hobby shop supported, aftermarket supported with close to ten years of history and scale trail adventures. The Trail Honcho™, built on the SCX10™ II chassis, meets the demands and the rigors of scale trailing miles from home when you need reliability the most!

When it’s time for adventure, you want a rig that allows you to think the unthinkable and go out and accomplish it. The SCX10™ II Trail Honcho™ is all about exploring the full size world in scale, making it a true adventure machine.

Equipped for heavy duty trailing – AX10™ transmission, single-piece AR44 axles, Method Hole wheels, Falken Wildpeak M/T tires and a set of four LED lights – the Trail Honcho™ takes the lead and puts your stamina to the test.

The Redonda Ridge Trail, within the mountains of Big Bear California, is mostly used by off road motorcyclist, and revered as the Malcolm Smith Trail due to it’s technical tenacity.

The trail was recently re-visited by one of Axial’s own; part of a crew who had traversed the 9.68 mile OHV trail a few times in the past on motorcycles. The thought came about that it would make for a great SCX10™ proving ground, thus the idea was conceptualized to hike the trail, and put the latest version of the Trail Honcho™ through its paces, to uphold the “Trail Honcho” name by putting it on a “black diamond” trail for full size vehicles. Axial takes toys seriously, plays seriously, and made plans to go the extra mile to showcase the Axial SCX10™ Trail Honcho™ in it’s true, namesake terrain.


REQUIRES

  • Battery
  • Charger lll
  • AA Batteries
Axial 1/10 Wraith RTR Rock Race Truckr Axial 1/10 Wraith RTR Rock Race Truckr
$699.00
$649.00
In stock

Description

This is the radio controlled, electric powered, ready to run, 1/10 scale Wraith Rock Racer from Axial.


FEATURES:

Chassis: Full tube composite construction with composite skidplate
Drive: Four wheel shaft with splined plastic slider and screw shaft for a more positive lock to the output shaft
Radio: AX-2 2.4GHz 2-channel with throttle and steering reverse and trim, AS-2 130oz-in metal gear steering servo and waterproof receiver box
Motor: 20T
ESC: AE-2 forward and reverse with drag brake
Transmission: Steel output gears and slipper clutch equipped, upgradable for three function Dig feature
Differentials: Locked type with easy access for rebuilding and maintenance
Suspension: Four link
Shocks: Oil-filed with silicone diaphragms and bushings and 3.5mm titanium nitride coated shafts
Cockpit: Console and gauge detail with licensed Corbeau LG1 race seats
Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo pack up to 1.8 (47mm) wide, 5.9 (150mm) long, 1.1 (28mm) high
Tires: 2.2 Ripsaw
Wheels: 8-spoke 2.2 Rebel black and chrome, 12mm hex mount
Lights: Four front and two rear with 14 included light buckets that hold 3mm and 5mm lights (LEDs not included)


INCLUDES:

Assembled Wraith Rock Racer with 2.4GHz Radio, 20T motor, cockpits six LED Lights and Instruction Manual


REQUIRES:

Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four for transmitter


SPECS:

Wheelbase: 13.5 (343mm)
Width: 11.6 (295.3mm)
Height: 9 (228.6mm)
Ground Clearance: 3 (76.2mm)
Weight: 5.5lbs (249kg)

Axial 1/10 Wraith Spawn 4WD RTR Rock Racer AX90045 Axial 1/10 Wraith Spawn 4WD RTR Rock Racer AX90045
$599.99
In stock

Description

The Axial Wraith Spawn is packed with performance features. This full bodied version Wraith retains many of the components that made this vehicle famous. The virtually bulletproof AR60 OCP axles are ready take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready for action.

The Wraithâ„¢ Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear.


AXIAL WRAITH ROCK RACER
The Wraith Spawn is ready for rock spitting, dirt slinging, action. Its designed to tackle the rocks with ease and blast across open desert at full attack speed. The bottom line, the Wraith is tough as nails and prepared for any terrain.

FULL TUBE FRAME COMPOSITE CHASSIS
The Wraith Spawn 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith IS BUILT TO GO FAST and is not just a low speed rock crawler.

REALISTIC SCALE DETAILS
The Wraith Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included. Choose your favorite style! And, the Spawn body is compatible with Wraith, AX10 and SCX10 chassis.

DESIGN PROCESS
For this project, Axial wanted to create a body that had a classic feel with modern styling. Just as we have seen in the use of retro designs in the auto industry, with cars like the Dodge® Challenger, we have also seen off-roaders use classic trucks in modern builds. To implement this idea, our Design and Marketing teams brainstormed and discussed some of our favorite trucks and SUVs from the late-70s and early-80s. Taking those vehicles into consideration, the Design team then studied the iconic styling cues of these vehicles and began sketching ideas. As a result, we developed those ideas and created a unique retro styled Axial SUV body - the Spawn.

Features

WB8 HD Wildboar driveshafts
Dual slipper clutch
Single-coil, adjustable shocks
Heavy duty differential lockers
Officially licensed 2.2 Method IFD beadlock wheels
New Spawn body on full tube frame composite chassis
Driver figure and molded interior
2.2 Ripsaw tires
AE-5 ESC w/ drag brake 3S LiPo capable (waterproof)
20T motor
Metal gear Tactic TSX45 MG servo, 151 oz-in, water resistant
Waterproof receiver box
Spawn body compatible with Wraith, AX10 and SCX10 chassis

Specifications

Length: 19.25 (490mm)
Width:11.2 (285mm)
Height: 9.1 (232mm)
Wheelbase: 14 (355mm)
Ground Clearance: 2.8 (72mm)
Weight:  5.45lbs (2.47kg)
Motor: 20T motor
Radio: AX-3 2.4GHz transmitter
Servos:  Tactic TSX45, 151 oz-in
ESC: AE-5 ESC w/ drag brake - 3S LiPo capable (waterproof)

Axial 1/10 Yeti 4X4 Kit Axial 1/10 Yeti 4X4 Kit
$519.99
Available to order

Description

  • Rock racing
    Rock Racing is the next up and coming form of R/C off road racing. Enthusiasts are taking it upon themselves to go back to the dirt with tracks composed of loose surfaces and big rocks. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles, especially rock racers, which are built for high speed performance through flat desert sections, and durability when tackling extreme off road terrain.
  • Skillfully engineered
    The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.
  • Independent Front Suspension
    The Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.
  • FALKEN WildPeak M/T tires
    The WildPeak All Terrain tire has amazing traction on many surfaces, even with its rather conservative pattern. This fact alone has had the entire industry on the edge of their seats waiting to see what the Falken rubber will be able to do with a more aggressive pattern. The WildPeak M/T version of this tire is here, albeit in a prototype stage. These prototypes are already being put through their paces by the whos who of the off road world. With tremendous success in competitive rock racing, this tire is already in very high demand. The Axial S30 compound will offer the performance you have come to expect from Axial.
  • Method IFD beadlock wheels
    Based off the Method MR101s these officially licensed wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 or SCX10. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress up with a new look.
  • Icon Vehicle Dynamics aluminum shocks
    These featured Icon Vehicle Dynamics aluminum shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability.
  • Heavy duty gear
    The heavy duty gear set offers you improved gear mesh reducing slop in the drive train. In addition it helps add weight low down which helps keep the center of gravity low and on the rocks where you want it. Made from high grade steel and hardened for increased strength.
  • Realistic scale details
    Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three white styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points. Includes realistic driver figures complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motor sport version of the helmet are included, choose your own style!
  • Length: 495mm
  • Width: 312mm
  • Height: 195mm
  • Wheelbase: 360mm
  • Ground Clearance: 50mm
  • Weight (with electronics): 2.9kg
  • Axial Yeti Rock Racer 1/10 Scale EP 4WD-KIT x1
  • Body x1
  • Tires & wheels
  • Radio gear set
  • Rcevier
  • Servo
  • ESC
  • Motor
  • Batteries
  • Charger
Axial 1/10 Yeti Electric 4WD Rock Racer RTR RC Car Axial 1/10 Yeti Electric 4WD Rock Racer RTR RC Car
$649.99
Available to order

Description

The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and independent front suspension. Its built to withstand the punishment of rock racing at a high level of performance. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles. The Yeti is a no-compromise mix of speed and handling unlike any other R/C vehicle. Its strategically engineered design supplies bashing stamina while delivering a high level of technical rock racing abilities without compromise in either category. Its powered by a 3150KV 4-pole brushless motor which provides the perfect amount of torque and speed for this rock racing monster. The long can design provides a massive amount of power, especially when powered by 3S. In the suspension department, the Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling.

ROCK RACING
Rock Racing is the next up and coming form of R/C off road racing. Enthusiasts are taking it upon themselves to go back to the dirt with tracks composed of loose surfaces and big rocks. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles, especially rock racers, which are built for high speed performance through flat desert sections, and durability when tackling extreme off road terrain.

SKILLFULLY ENGINEERED
The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.

INDEPENDENT FRONT SUSPENSION
The Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.

Features

3150KV BRUSHLESS MOTOR, WATERPROOF
The included 3150KV 4-pole brushless motor provides the perfect amount of torque and speed for this rock racing monster. The long can design provides a massive amount of power, especially when powered by 3S. Whether ripping through the fields or negotiating technical terrain, this power plant has you covered.

VANGUARD ESC, 3S LIPO, WATERPROOF
Developed by Castle Creation for Axial, the Vanguard ESC provides exceptional power, braking and adjustability. The ESC comes standard with Deans® Ultra Plugs®. The ESC can be programmed manually via Castle Field Programming Card or through the Castle Link software interface (optional).

ALUMINUM SHOCK BODIES
Usually an option from Axial, these aluminum shock bodies are standard equipment in this RTR Yeti, making for very smooth suspension movement throughout the full range of wheel travel. These bodies are precision machined for consistent handling when putting the Yeti through its paces.

AR60 OCP-AXLE
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
Off-center pumpkin design
Axle tubes are reinforced with a boxed-in axle truss
High strength composite material

4-LINKED REAR SUSPENSION
The Yetiâ„¢ features the proven AR60 rear axle with a completely new 4-linked rear suspension. The Yetiâ„¢ chassis offers three upper link positions to adjust the anti-squat. The lower link mounts can be flipped to change the roll center. These advanced tuning options will help you get the most performance from your rig.

LONG TRAVEL REAR SWAY BAR
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.

BFGOODRICH® KRAWLER T/A® KX TIRES
In the full-size offroad world, BFGoodrich® Krawler T/A® KX tires are the winner of more rock-crawling championships than all other tires combined (Race spec tire, Years 2004 through 2008). The Axial version of this tire captures the same aggressive look and provides awesome performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to it's high level of performance and diversity.

WALKER EVANS RACING WHEELS
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
Three piece beadlock design
Utilizes new 2x11mm pins for added strength
Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin 
Adjustable breather holes for fine tuning tire performance 
Compatible with most 2.2 tires 
Easy six screw disassembly

WB8 HD WILDBOAR REAR DRIVESHAFT
The WB8 HD rear driveshaft features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

WB8 HD CENTER CVD JOINT
The WB8 HD Wildboar Driveshaft Joint is employed from the transmission to the front bulkhead. It features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.

DUAL SLIPPER CLUTCH
Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

HI-LO TRANSMISSION
The Axial Hi-Lo transmission was specifically designed for the Yeti chassis. With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment and brushless power. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Optional two-speed transmission component sold separately.

DUAL SHEAR STEERING RACK
The Yeti features an updated EXO steering rack that offers additional strength for 2.2 size tires, and double shear capture points on the steering tie rods for ready-to-go rock racing action!

FULLY ADJUSTABLE BATTERY TRAY
The integrated battery tray can be easily accessed by removing the two front body pins and pivoting up the entire body. Gain full access to the battery trap door by removing the remaining body pin. The battery tray is fully height adjustable with four button head screws, making room for most standard sized 2S and 3S LiPo battery packs.

REALISTIC SCALE DETAILS
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, two black styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points.

2.4GHz RADIO FOR WORRY-FREE DRIVING
The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low.

3-CHANNEL 2.4GHz RECEIVER
The AR-3 2.4 GHz receiver uses no crystals so youll experience worry free driving with no frequency conflicts. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!

RECEIVER BOX, WATERPROOF
The new waterproof receiver box is integrated into the bottom of the Yeti chassis. Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

METAL GEAR TACTIC SERVO, 151 oz-in,
WATER RESISTANT
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

Required to Complete

  • 2-3 cell LiPo Battery

  • Charger to suit LiPo

  • AA Batteries for transmitter

Carisma 1/10 SCA-1E Lynx ORV Scale Adventure RTR 58768 Carisma 1/10 SCA-1E Lynx ORV Scale Adventure RTR 58768
$399.99
In stock

This highly scale detailed Outbreak Response Vehicle (ORV) is packed with features to help you outrun, run over, or run through the living dead and away to safety. Whether you’re on the asphalt or on the rough stuff the Lynx ORV and its permanent 4x4 drive system is equipped to deal with just about anything.


Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.


Description

This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready to Run SCX10 Deadbolt Rock Crawler Truck Kit from Axial.

FEATURES

Chassis: Scale steel C-channel with cross bracing for reinforcement
and assembled with hex hardware
Drive: 4 wheel shaft with WB8 wild boar driveshafts and constant
velocity joint design
Diff Locker: One-piece sintered metal construction reduces slop in
drive train by eliminating cross pin
Radio: AX-3 2-channel 2.4GHz with high torque 151 oz/in metal gear
Tactic TSX45 servo
ESC: AE-5 LiPo compatible with forward, reverse and drag brake
function, waterproof and 3S LiPo compatible
Motor: 27T brushed motor
Pinion Gear: 32 pitch
Shocks: Oil filled single rate with realistic looking non-functional
coilover shock reservoir, plastic body
Transmission: Designed to place motor weight as low as possible
to maintain a low CG, adjustable ratio from 15:1 - 74:1, dual
slipper clutch with 32 pitch gearing for high torque applications
allows transmission to slip in hard binds
Body: Deadbolt style with painted hood cowl, interior, scale helmet,
decals and fuel cell
Wheels: 1.9 wide Walker Evans, nylon construction, black in
color, 12mm hex
Tires: Maxxis Trepador R35 sticky compound 1.43 (36mm) wide, 4.6
(117mm) diameter
Rear Suspension: 4-link optimized to reduce axle steer and torque
twist
Front Bumper: Officially licensed Poison Spyder Rock Brawler with
 functional D Rings, and mounting holes for LED lights (lights not
 included)

INCLUDES

RTR SCX10 Deadbolt, 2-ch 2.4GHz radio, ESC, 27T Motor, Instruction Manual, sheet of decals

REQUIREMENTS

Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 2-3S LiPo pack
Battery Charger: Compatible with selected battery

SPECIFICATIONS

Length: 18.1 (460mm)
Width: 8.8 (225mm)
Height: 9 (229mm)
Wheelbase: 12 (305mm)
Ground Clearance: 2.7 (68mm)
Weight: 4.65lb (2.1kg)


Description

2005 marked the birth of the Axial brand, and shortly after, thoughts about the first SCX10 began, with development wrapping up in 2008. The SCX10 was introduced to the world as a builders kit, paving the way, or better yet, raising the bar for a new generation of scale trail enthusiasts. Previously, hobbyists had to scratch build a rig which presented a lot of technical hurdles to overcome. The SCX10 kit gave these artists time to focus their attention on other things like personalization and visual customization by removing the issues scratch-built scale rigs presented. And, it wasn't just as a great kit to build, it was also a very capable driving machine, making it the de facto scale rig the world over. The SCX10 chassis platform provided all the technical attributes as well as scale looks with its signature all-metal twin c-channel frame, solid performing transmission and axles that provided enough realism with capabilities to match.

With the SCX10 II, we've kept essence of the SCX10 there with all-metal twin c-channel frame rails, but that's only 2% of the 98% of a completely new design. Scale AR44 high pinion axles, a chassis mounted servo (CMS), re-designed transmission, front mounted battery tray, all aluminum suspension links, and a properly designed suspension for nearly zero bump steer. These are just a few of the features built into the all new SCX10 II.

AR44 HI-PINION AXLES
In 2008, the AX10 axle was used in the launch of the SCX10 chassis platform. While developing the next iteration of axles such as the AR60, the thought process began on what kind of axle would be best for the future of the SCX10. Axials development of a new axle needed to feature three key design points. First, an axle housing to visually quench the thirst of scale enthusiasts. Second, a gear set with the technical attributes to overcome the torque twist often associated with smaller gear sets. Third, the axle itself needed to retain the durability associated with the SCX10, despite being delivered in a smaller axle housing. After seven years of utilizing the original AX10 axle and two years of development, Axial is proud to introduce our newly developed AR44 axle with the industrys first high pinion gear set. The next chapter of the Axial SCX10 begins with scale realism backed with true technological development!

High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
Single piece axle housing for added strength
1-piece all-metal locker front and rear
Small pumpkin for increased clearance and a more realistic, scale look
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio – 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs

Description

The Axial Wraith Spawn kit version is packed with performance features and option parts that you add as you build it. The virtually bulletproof AR60 OCP axles are ready to take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The 2.2 Maxxis Trepador tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or backyard bashing, the Wraith Spawn is ready for action.

FEATURES

Chassis:Full tube composite construction with composite skidplate
Drive:Four wheel shaft with WB8 HD Wildboar 3-piece driveshafts
with captured cross pin design eliminating older set screw design
hardened steel universal joints increase steering angle by 10°
over stock dogbone/drive cup setup
Axles:AR60 OCP (Off-Center-Pumpkin) high-strength composite design
Transmission:Steel output gears and dual slipper clutch equipped
Differentials:Locked type with easy access for rebuilding and
maintenance
Spur Gear:Molded composite plastic 32 pitch, 56 tooth
Suspension:Four link optimized to reduce axle steer, machined
aluminum lower suspension links reduce flex and provide precise
control over rough terrain
Shocks:Icon Vehicle Dynamics aluminum body
Receiver Box:Waterproof
Cockpit:Lexan interior with molded driver figure
Battery Tray:Sized for 6-cell 7.2V standard stick packs or 2S LiPo
pack up to 1.8 (47mm) wide, 5.9 (150mm) long, 1.1 (28mm) high
Tires:2.2 (56mm) diameter Maxxix Trepador in S30 compound and
multi-stage staggered shoulder pattern for improved control, foam
inserts also included
Wheels:Three piece Method IFD 12 spoke beadlock with updated hub
adapter that uses standard 12mm hex
Body:Clear polycarbonate Wraith Spawn


Description

Based on a long standing relationship between Axial, Jeep® and Poison Spyder, this Jeep® Wrangler Wraith is the culmination of efforts between these three iconic off road lifestyle brands.


Ultra4 Racing combines the best of both off road racing worlds including high speed desert action and hard core rock racing. The Axial Jeep® Wrangler Wraith appeals to fans of this event series because it offers some of the same spectacular abilities. Featuring a full tubular chassis and a detailed interior just like the full size counterparts, the realism offered by this vehicle is second to none. The livery is a virtual replica of the amazing machine that the talented crew at Poison Spyder Racing have constructed just for the Ultra4 series.

AXIAL WRAITH ROCK RACER

The Jeep® Wrangler Wraith is ready for rock spitting, dirt slinging, action. Its designed to tackle the rocks with ease and blast across open desert at full attack speed. The bottom line, the Wraith is tough as nails and prepared for any terrain.

FULL TUBE FRAME COMPOSITE CHASSIS

The Jeep® Wrangler Wraith - Poison Spyder 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith IS BUILT TO GO FAST and is not just a low speed rock crawler.

BUILT FOR PERFORMANCE

The Jeep® Wrangler Wraith is built with traditional straight axles allowing for maximum suspension articulation. This vehicle features differential lockers front, center and rear just like its full size counterpart. With lockers and maximum articulation, there isnt anywhere you cant take this rock racing machine!

TRAIL READY HD SERIES IFD BEADLOCK WHEELS

Officially licensed Trail Ready HD Series beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. Serrated wheel nuts provide plenty of bite to keep the wheel securely in place and theyre anodized blue for great looks!

BFGOODRICH KRAWLER T/A® KX TYRES

Officially licensed BFGoodrich Krawler T/A® KX tires! In the full-size offroad world, they are the winner of more rock-crawling championships than all other tyres combined (Race spec tire, Years 2004 through 2008). The Axial version captures the same aggressive look you've been waiting for.

AXIAL AR60 OCP-AXLE (OFF-CENTRE PUMPKIN DESIGN)

True 4-wheel drive locked differentials are included for improved traction and an offset pumpkin provides more ground clearance and a better driveshaft angle. Additionally, the rear axle has been shaved of any unnecessary items and steering linkages that normally stick down have been removed for as much ground clearance as possible. The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle. A locked differential provides the most positive wheel traction in all off-road environments and conditions and requires less maintenance over oil-filled or silicone based differentials. These are easily serviced by removing four screws to gain access for rebuilding and performance tuning as well.

REALISTIC SCALE DETAILS

The Wraith is packed with a variety of realistic details like a steering wheel, shifters, a molded polycarbonate interior, molded seats and a full roll cage molded in tough nylon injected plastic for durability.

WB8 WILD BOAR DRIVESHAFTS

Metal to metal universal joint driveshaft system with splined plastic slider. This design provides more durability than traditional driveshaft designs because it uses a screw shaft for a more positive lock to the output shaft.

- Constant Velocity Joint Design [CVJ]
- Full Metal-To-Metal Construction for the CVJ-Housing
- Friction Free Movement / Smooth Articulation
- Tough-as-Tusk Durability
- Easy Assembly & Maintenance

4-LINK SUSPENSION

The suspension geometry utilizes a 4-Link design which is optimized to reduce axle steer and to have the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.

TUNED SHOCK SPRINGS

Finding the right spring rate can be tough. Axial made it easy for you by including what we found to be the right balance of high speed and harsh terrain handling. The softer spring rate keeps the Wraith on course and ready for your next obstacle!

SLIPPER CLUTCH

Allows the motor to work more efficiently and greatly enhances the durability of the drivetrain allowing the transmission to slip in hard binds.

PROTECTIVE TRANSMISSION COVER

Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drive train.

ALL HEX HARDWARE

All hex hardware for easy assembly. No Philips screwdrivers required!

FULL TUBE FRAME COMPOSITE CHASSIS

The most realistic high strength composite tube frame chassis. Based on the Night Stalker II Chassis built by Jake Hallenbeck. Our high strength composite plastic is impact resistant to help protect the Wraith from crash damage.

BATTERY TRAY

Battery tray for Standard Stick Pack and LiPo Packs Battery: 7.2v Stick Pack/2S LiPo Pack up to 47x150x28mm (W x L x D) in size. No disassembly or tools needed to remove and replace the battery.

DURABLE SKID PLATE

The skid plate protects the transmission and other critical components while providing a flat surface to help the Wraithâ„¢ slide over rocks or other obstacles.

OFFICIALLY LICENSED BODY

Our partnership with Jeep® continues with an officially licensed Jeep® Wrangler body, wrapped in officially licensed Poison Spyder graphics.

VERTICALLY MOUNTED ESC

The ESC is held in place vertically by a secure, clip-in style plastic mounting system just behind the radio box. Facing the rear of the truck helps keep debris and water away from the ESC.

AE-2 ESC WITH DRAG BRAKE

The Axial AE-2 ESC was developed in partnership with Castle Creations and features LiPo cutoff, drag brake for tough crawling situations, a Tamiya style plug connector and is programmable via Castle Link (Castle Link not included).

AR-3 2.4GHz RECEIVER

AR-3 2.4GHz receiver - no crystals required.
No frequency conflicts for worry-free driving.
Bind button and LED indicator makes setup easy!
3-channel.
Lightweight, compact size.

20T MOTOR

Tear up the terrain, be it flat out desert, rocky roads or crawling! Easy operation: no tuning, no fuel, no loud exhaust noise. Just plugngo! Our design allows for optional 550 size motors to fit as well.

PROTECTIVE ELECTRONICS BOX

Designed to protect the electronics from some serious off-road dust and debris. Please visit our blog for more information on waterproofing electronics.

AX-3 2.4GHz TRANSMITTER

2.4GHz, 2 channel pistol grip radio.
Servo reversing switches for steering and throttle.
Trim dials for fine tuning steering and throttle centers.
Battery indicator light lets you know when your transmitter batteries run low.

THE MOST VERSATILE PLATFORM

The Axial Wraith changes the game with its impressive 1:1 scale looks, high-speed monster truck bashability, and technical crawl capabilities. The Wraith is the most versatile vehicle satisfying the needs of a wide range of enthusiasts.

Requires

Battery & charger.

Description

Axial R/C Inc. is extremely pleased to partner with Randy Slawson, Bomber Fabrication's owner and two-time King of the Hammers rock racing champion! For this rig, we took everything we learned from building the industry's first all plastic tube chassis rig and drew upon mountains of inspiration from enthusiasts to go next level! The Axial RR10 Bomber is not just another plastic tube chassis Wraith update - it merely adds to our line of successful 2.2 rock racing vehicles. While visually this rig is a race replica of the Bomber Fab KOH rock racing rig, one of the unseen features is the front mounted battery tray under the hood making for easy access and weight right where you asked for it! This makes swapping the batteries in this rig a quick and easy process, especially for those enthusiasts participating in the ultra endurance series within Axialfest! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10â„¢ specific transfer case for optimal driveline efficiency. We've also included a full set of BFGoodrich® BAJA T/A® KR2 tires along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels. Weve included a variety of shock mounting points for running dual shock setups and more suspension tuning options. For additional rear suspension tuning, youll find a sway bar mount connected to the cage, under the fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Standard features include durable front and rear WB8 HD Wildboar driveshafts, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears, a 3-channel radio system, realistic scale details including molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels and graphics, and a fully licensed scale tube chassis.

FEATURES
BFGOODRICH® BAJA T/A® KR2 TIRES - S30 COMPOUND
In the full-size world of off-road racing, BFGoodrich® tires have proven to be the go-to tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial's version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to its high level of performance and diversity.
KING ADJUSTABLE ALUMINUM SHOCKS
The included aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
FORWARD MOUNTED EASY ACCESS BATTERY TRAY
Remove two body clips to release the front hood for access to the adjustable battery compartment. The compartment features ample room for securing 2S/3S LiPo batteries.
EASY ACCESS TO ELECTRONIC COMPONENTS
All electronics are routed and part of skid plate assembly. Simply drop the skid plate and remove the shocks at the chassis to gain access to the electronic components.
DUAL SHEAR SHOCK MOUNTS
All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
MULTIPLE SHOCK/LINK POINTS AND SWAY BAR MOUNT
Weve included a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate youll find two front upper link mount positions and three rear upper link mount positions. For additional rear suspension tuning, youll find a sway bar mount connected to the cage, under the fuel cell. Optional sway bar sold separately (AX31331).
SCALE DETAILS
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three pairs of black styrene helmets (motorsport, open skull-face and motocross), scale molded shock reservoirs, fuel cell, and RR10 licensed Bomber Fabrication scale tube chassis.
FULL TUBE FRAME COMPOSITE CHASSIS
The most realistic high strength composite tube frame chassis. Our high strength composite plastic is impact resistant to help protect the RR10 from crash damage.
OPTIMIZED DRIVELINE EFFICIENCY
The YETI style transmission with RR10 specific transfer case bolts directly onto the skid plate allowing for proper driveshaft alignment required with AR60 axles.
HI-LO TRANSMISSION AND DUAL SLIPPER CLUTCH. INDUSTRY PROVEN DURABILITY, AND BRUSHLESS READY!
With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
AR60 OCP-AXLE
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.

Off-center pumpkin design
Axle tubes are reinforced with a boxed-in axle truss
High strength composite material
Updated steering knuckles for dual shear, also eliminates secondary bolt on plate
Updated differential cover and servo mount for new look
REAR OUTPUT DIFFERENTIAL COVER
Included with the kit but not installed, the AR60 rear output differential cover enables the opportunity to build multi-axle vehicles without costly modifications.

If youve already got a Yeti, Wraith or AX10 with AR60 axles, you can purchase this optional RR10 AR60 Axle Component Set separately (AX31317) which includes link mounts for optional shocks to be installed up front, and mounts for an optional rear sway bar.
WB8 HD WILDBOAR DRIVESHAFTS, FRONT AND REAR
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

3-piece driveshaft with strengthened slider-floater tube.
Increased surface at the connection between the ball joints and output shaft tubes.
2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
Captured cross pin design eliminates older set screw design for more durability and easy maintenance.
STRONGER STEERING KNUCKLES
Featuring a new design specifically for the AR60 front axle, weve updated the old knuckles by removing the steering arms and weve made them stronger by adding more material and gave them an updated, more refined look.
2.2 WALKER EVANS RACING WHEELS
Officially licensed Walker Evans Racing wheels dressed in an aggressive all black style and they work with most 2.2 tires.
SPARE TIRE AND MOUNT
Bolted onto the back is an included BFGoodrich® BAJA T/A® KR2 and Walker Evans 2.2 wheel/tire combo with a quick release spinner for mounting.
RECEIVER BOX WATERPROOF
The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
TACTIC 3-CHANNEL 2.4GHz RECEIVER
The Tactic TR325 2.4GHz receiver uses no crystals and features an internal antenna, so youll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!
35T BRUSHED MOTOR WATER RESISTANT
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan allowing for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug n go!
TACTIC TTX300 3-CHANNEL SLT RADIO
Sport-level racers and bashers will appreciate the TTX300s many popular features, along with its amazing adjustability. It features a programmable 3rd channel making for incredible versatility; it can operate functions such as two-speed shifting, winches and lights, making it ideal for a vast array of opportunities. Need more reasons? Theres SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter with push-button ease.
AE-5 ESC WATERPROOF

The Axial AE-5 ESC is 3S LiPo capable yet easily switched in the field between LiPO and NiMh battery types with a simple jumper no more complex procedures.

Male Star Plug lead - compatible with the most common polarized plug in RC.

Jumper 1 provides a simple plug and play choice between LiPo or NiMh.

Jumper 2 switches Drag Brake settings.

Waterproof design with waterproof On/Off switch / Star Plug / laser etched heat sink.

Axial is constantly moving forward in an effort to maximize performance and detail for scale enthusiasts. The SCX10™ II 2017 Jeep® Wrangler Unlimited CRC edition is a perfect example of that union, matching unparalleled trail-ability with stunning good looks.

Some of the specialized parts we've included are CRC front and rear bumpers, unique rock rails with additional body-mounting points, molded front and rear fenders and a CRC-inspired hood. Additional external scale features consist of molded side mirrors, door handles, windshield wipers, hood latches and a full set of lights (six in total) that mount into a realistic front radiator/light bucket combo.

The 2017 Jeep® Wrangler Unlimited CRC edition builds on the wildly popular SCX10™ II chassis, a proven platform that includes unique features that have made this truck a top performer in its class. High-clearance AR44 high-pinion axles, a chassis mounted servo (CMS), re-designed AX10 transmission case and tough steel suspension links are just a few of the performance parts tucked away under the detailed Jeep® Wrangler Unlimited body.

SCALE DETAILS INCLUDED!

The SCX10 II 2017 Jeep Wrangler CRC Edition includes realistic molded scale detail parts such as a molded plastic radiator with LED light holders for head lights and turn signal markers, side mirrors, door handles, plastic hood latches, wipers, CRC front and rear bumpers, rock rails, stylish front and rear fenders, and rear LED holders with red tail light lenses.

 

FEATURES

 

  • CRC licensed parts
  • LED lighting
  • C-channel chassis
  • Full time 4wd
  • WB8 HD Wild Boar driveshafts
  • AX10 three gear transmission
  • Dual pad slipper
  • 35 turn brushed motor

 

 

REQUIRES

 

  • Battery & Charger
  • (4) AA batteries for transmitter

 


Description

Axial is constantly working toward bringing to market the latest and coolest scale trail rigs. The Jeep® Wrangler has become a staple in the Axial line up. Jeep® brand vehicles are unique in that the 1:1 marketplace offers a tremendous amount of accessories to customize your Wrangler platform.

Axials latest offering is a Jeep® Wrangler Unlimited Rubicon featuring components that are considered the hottest in the aftermarket arena. Rigid Industries is one of the most popular companies supporting the Jeep® aftermarket and their LED lighting products are some of the most sought after upgrades. For this product, Axial has included a pre-installed, scaled down 50 E-Series light bar along with scaled down versions of the wildly popular Rigid Dually lights. All of the Rigid lighting is functional featuring 10 working LEDs.

Axial has also teamed with Casey Currie to bring this latest Jeep® to market. Casey is one of those iconic individuals who lives and breathes the Jeep® brand. Having grown up exploring the back roads within the legendary Currie family, Casey embodies the Axial lifestyle to a T. When he isnt out racing his short course truck, riding his dirt bike or rock crawling his JK, hes busy wrenching on and driving his Axial rigs. His latest venture is a brand called CRC. The CRC message is fun whether cruising, racing or crawling Jeep® brand vehicles. You can expect many great things from Casey and the CRC brand for your full size Jeep® in the near future!

Casey Currie is one of the most successful young off-road racers on the scene today. When he isnt out on the track putting down lightning fast times, hell be out exploring the back roads with his Jeep® Wrangler. So its no surprise that hes started his own brand around his adventurous lifestyle. A brand called CRC. CRC stands for cruise it, race it, crawl it, and embodies everything he does with his Jeep® brand vehicles.

Features

RIGID INDUSTRIES LIGHT BARS
Rigid Industries is on the forefront of new off-road lighting technology. Their LED light bars have revolutionized the entire off road lighting industry. A favorite choice for Jeep® Wrangler owners, the 50 E-Series roof mounted light bar, and a pair of Rigid Dually lights compliment the C/R edition Jeep® Wrangler perfectly. A total of 10 forward facing bright white LEDs are installed to light the way for those after hours trail runs. Two additional Rigid bars are included in the box, just add some LEDs and hit the trail! (additional LEDs sold separately)

CRC EDITION BLACK ROCK WHEELS
One of the first products from the Casey Currie brand are these awesome CRC edition Black Rock Wheels. Youll always find Casey running Black Rock Wheels whether he is cruising, racing or crawling. The flat black finish combined with their great strength make them the perfect addition to the Axial C/R edition Jeep® Wrangler.

1.9 BFGOODRICH KRAWLER T/A KX TIRES
In the full-size offroad world, they are the winner of more rock-crawling championships than all other tires combined (Race spec tire, Years 2004 through 2008). The Axial version captures the same aggressive look you've been waiting for in Trail/Comp sticky R35 compound. BFGoodrich® Tires and KRAWLER T/A® Trademarks are used under License from Michelin

METAL GEAR TACTIC SERVO, 151 oz-in
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

EXTENSION WIRING HARNESS
Wiring for the lights is neatly strung under the body and the included extension wiring harness makes it easy to remove the body when you need to get under the hood.

POISON SPYDER ROCK BRAWLER BUMPER
Officially Licensed Poison Spyder Rock Brawler front bumper adds realism and functionality. The bumper features functional D-Rings for realistic recoveries, mounting holes for LED lights and an excellent approach angle to tackle extreme terrain.

REAR BUMPER W/SWING OUT CARRIER
The Poison Spyder Rock Brawler rear bumper includes a realistic swing out tire carrier and quick release spinner for mounting the spare tire, two hooks for connecting D Rings and two holes for LED lights (LED lights not included - optional AX24257 Simple LED Controller sold separately).

POISON SPYDER CRUSHER FLARES
Offroading puts your vehicle right in the middle of conditions where durability matters most. The Poison Spyder Crusher Flares help protect the body from impacts and they're designed for additional tire clearance and an aggressive look.

Some other features include

  • 27T brushed motor
  • 4 Link rear suspension
  • Ultra compact Transmission placed for a low center of gravity
  • Slipper clutch and protective spur gear cover
  • Rock sliders
  • Metal frame realistic c-channel chassis
  • Adjustable Coilover Shocks
  • Heavy duty diff locker
  • 2.4ghz radio gear
  • Lipo compatable ESC with Drag Brake (tamiya plug)

Required to complete
7.2v NiMH or 7.4v LiPO Battery
Charger to suite battery
4 AA Batteries for transmitter

Description

This car requires a battery and charger to be purchased separately.

TRAIL PROVEN PERFORMANCE
Axial has joined forces with the most recognized name in off-roading - Jeep®. The SCX10 Jeep® Wrangler Unlimited Rubicon was designed to resemble its full sized scale/1:1 counterpart. We really did our research with this vehicle by building a full scale version for testing, research and development. We wanted to make sure you'd get the best built SCX10, right out of the box.

GO OVERLAND, DO EXPEDITIONThe SCX10 also includes a rock solid, proven durable transmission with a protective cover to keep dirt and debris out of your pinion and spur gear and an adjustable slipper clutch that allows the motor to work more efficiently which greatly enhances the durability of the drivetrain by allowing the transmission to slip in hard binds. The SCX10 mates the transmission and axles to an even more realistic or scale metal c-channel frame. The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic shock hoops with multiple shock mounting positions allow you to adjust your suspension for maximum performance.

SCALE REALISM
The SCX10 also runs true to scale wheels and tires. We've included a set of officially licensed Maxxis Trepador tires molded in our R35 sticky compound which offers superior grip and they're mounted on two-tone Walker Evans Racing wheels for great looks! The SCX10 Jeep® Wrangler Unlimited Rubicon is designed for fun, especially if you have a few friends that have scale rigs. Getting a few guys together and going out for a scale trail run is one of the most enjoyable things you can do if youre an avid off-roading enthusiast. The SCX10 Jeep® Wrangler Unlimited Rubicon is a 1:10 scale rig that provides full scale fun!

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. It also helps with steep off-camber climbs by having the proper amount of anti-squat and roll characteristics. The 4-Link system also aids against suspension wrap-up in high power applications.


The axles have been designed with many features that are not available from other products on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration when designing these axles. The result is a far superior axle that will stand up to some severe punishment. To ensure added longevity from the start a hi-tolerance sintered diff locker is included along with hardened axle shafts.

TRANSMISSION
The transmission was designed to place the weight of the motor as low as possible to maintain a low CG (Center of Gravity). The ultra compact transmission doesnt compromise performance because it also allows for a wide range of gearing choices. The overall ratio can be adjusted from 15:1 all the way up to 74:1 using different pinion/spur gear choices which allow for super high speed or to competition level crawling speed.

METAL FRAME CHASSIS
The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness). Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance. The simplified design makes maintenance and assembly quick and easy. The contoured skid plate significantly reduces hang-ups on terrain.

Description

The SCX10 has been the vehicle of choice for scale trail fun! For the past 8 years the SCX10 has been the staple vehicle platform for scale trail enthusiasts around the world. Axial was one of the first companies to embrace R/C rock crawling and the first to mass produce a scale trail truck. Axial has been watching trends, tirelessly testing, and experimenting to create the next evolution of the SCX10. The SCX10 II is the culmination of many years of development, furthering aesthetic realism while maximizing trail performance. The next generation of SCX10 is here!


High pinion gears for added ground clearance & better driveshaft angles
The high pinion design allows increased gear surface contact for increased durability
Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
Single piece axle housing for added strength
1-piece all-metal locker front and rear
Small pumpkin for increased clearance and a more realistic, scale look
Bolt on link mounts
Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
Optimized gear ratio 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs


RECEIVER BOX, WATERPROOF
Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

Waterproof receiver box located on the side plates allows easy access and low center of gravity

WIRE ROUTING
Wire routing has been thoroughly thought through to help keep your chassis layout looking clean. In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.

Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo

RECOMMENDED TERRAIN

Terrain_rocky_48x68
Terrain_mountainous_48x68
Terrain_offroad_48x68
REQUIRED ITEMS (not included)
Required_48x68_battery
Required_48x68_charger
Required_48x68_aa_batteries
Battery: 2S or 3S LiPo pack, or NiMH pack (batteries not included)

The SCX10™ II Trail Honcho™ is the reliable choice for scale trail fun! For the past nine years the SCX10™ has been the staple vehicle platform for scale trail enthusiasts around the world. When it’s you, the trail and your rig, you want the tried, and true. You want real world community tested, hobby shop supported, aftermarket supported with close to ten years of history and scale trail adventures. The Trail Honcho™, built on the SCX10™ II chassis, meets the demands and the rigors of scale trailing miles from home when you need reliability the most!

When it’s time for adventure, you want a rig that allows you to think the unthinkable and go out and accomplish it. The SCX10™ II Trail Honcho™ is all about exploring the full size world in scale, making it a true adventure machine.

Equipped for heavy duty trailing – AX10™ transmission, single-piece AR44 axles, Method Hole wheels, Falken Wildpeak M/T tires and a set of four LED lights – the Trail Honcho™ takes the lead and puts your stamina to the test.

The Redonda Ridge Trail, within the mountains of Big Bear California, is mostly used by off road motorcyclist, and revered as the Malcolm Smith Trail due to it’s technical tenacity.

The trail was recently re-visited by one of Axial’s own; part of a crew who had traversed the 9.68 mile OHV trail a few times in the past on motorcycles. The thought came about that it would make for a great SCX10™ proving ground, thus the idea was conceptualized to hike the trail, and put the latest version of the Trail Honcho™ through its paces, to uphold the “Trail Honcho” name by putting it on a “black diamond” trail for full size vehicles. Axial takes toys seriously, plays seriously, and made plans to go the extra mile to showcase the Axial SCX10™ Trail Honcho™ in it’s true, namesake terrain.


REQUIRES

  • Battery
  • Charger lll
  • AA Batteries

Description

This is the radio controlled, electric powered, ready to run, 1/10 scale Wraith Rock Racer from Axial.


FEATURES:

Chassis: Full tube composite construction with composite skidplate
Drive: Four wheel shaft with splined plastic slider and screw shaft for a more positive lock to the output shaft
Radio: AX-2 2.4GHz 2-channel with throttle and steering reverse and trim, AS-2 130oz-in metal gear steering servo and waterproof receiver box
Motor: 20T
ESC: AE-2 forward and reverse with drag brake
Transmission: Steel output gears and slipper clutch equipped, upgradable for three function Dig feature
Differentials: Locked type with easy access for rebuilding and maintenance
Suspension: Four link
Shocks: Oil-filed with silicone diaphragms and bushings and 3.5mm titanium nitride coated shafts
Cockpit: Console and gauge detail with licensed Corbeau LG1 race seats
Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo pack up to 1.8 (47mm) wide, 5.9 (150mm) long, 1.1 (28mm) high
Tires: 2.2 Ripsaw
Wheels: 8-spoke 2.2 Rebel black and chrome, 12mm hex mount
Lights: Four front and two rear with 14 included light buckets that hold 3mm and 5mm lights (LEDs not included)


INCLUDES:

Assembled Wraith Rock Racer with 2.4GHz Radio, 20T motor, cockpits six LED Lights and Instruction Manual


REQUIRES:

Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Charger: For selected battery type
AA Batteries: Four for transmitter


SPECS:

Wheelbase: 13.5 (343mm)
Width: 11.6 (295.3mm)
Height: 9 (228.6mm)
Ground Clearance: 3 (76.2mm)
Weight: 5.5lbs (249kg)


Description

The Axial Wraith Spawn is packed with performance features. This full bodied version Wraith retains many of the components that made this vehicle famous. The virtually bulletproof AR60 OCP axles are ready take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready for action.

The Wraithâ„¢ Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear.


AXIAL WRAITH ROCK RACER
The Wraith Spawn is ready for rock spitting, dirt slinging, action. Its designed to tackle the rocks with ease and blast across open desert at full attack speed. The bottom line, the Wraith is tough as nails and prepared for any terrain.

FULL TUBE FRAME COMPOSITE CHASSIS
The Wraith Spawn 1/10th Scale Electric 4WD Rock Racer features a realistic full tube-frame chassis design that is manufactured with high strength composite materials. The Wraith IS BUILT TO GO FAST and is not just a low speed rock crawler.

REALISTIC SCALE DETAILS
The Wraith Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included. Choose your favorite style! And, the Spawn body is compatible with Wraith, AX10 and SCX10 chassis.

DESIGN PROCESS
For this project, Axial wanted to create a body that had a classic feel with modern styling. Just as we have seen in the use of retro designs in the auto industry, with cars like the Dodge® Challenger, we have also seen off-roaders use classic trucks in modern builds. To implement this idea, our Design and Marketing teams brainstormed and discussed some of our favorite trucks and SUVs from the late-70s and early-80s. Taking those vehicles into consideration, the Design team then studied the iconic styling cues of these vehicles and began sketching ideas. As a result, we developed those ideas and created a unique retro styled Axial SUV body - the Spawn.

Features

WB8 HD Wildboar driveshafts
Dual slipper clutch
Single-coil, adjustable shocks
Heavy duty differential lockers
Officially licensed 2.2 Method IFD beadlock wheels
New Spawn body on full tube frame composite chassis
Driver figure and molded interior
2.2 Ripsaw tires
AE-5 ESC w/ drag brake 3S LiPo capable (waterproof)
20T motor
Metal gear Tactic TSX45 MG servo, 151 oz-in, water resistant
Waterproof receiver box
Spawn body compatible with Wraith, AX10 and SCX10 chassis

Specifications

Length: 19.25 (490mm)
Width:11.2 (285mm)
Height: 9.1 (232mm)
Wheelbase: 14 (355mm)
Ground Clearance: 2.8 (72mm)
Weight:  5.45lbs (2.47kg)
Motor: 20T motor
Radio: AX-3 2.4GHz transmitter
Servos:  Tactic TSX45, 151 oz-in
ESC: AE-5 ESC w/ drag brake - 3S LiPo capable (waterproof)


Description

  • Rock racing
    Rock Racing is the next up and coming form of R/C off road racing. Enthusiasts are taking it upon themselves to go back to the dirt with tracks composed of loose surfaces and big rocks. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles, especially rock racers, which are built for high speed performance through flat desert sections, and durability when tackling extreme off road terrain.
  • Skillfully engineered
    The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.
  • Independent Front Suspension
    The Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.
  • FALKEN WildPeak M/T tires
    The WildPeak All Terrain tire has amazing traction on many surfaces, even with its rather conservative pattern. This fact alone has had the entire industry on the edge of their seats waiting to see what the Falken rubber will be able to do with a more aggressive pattern. The WildPeak M/T version of this tire is here, albeit in a prototype stage. These prototypes are already being put through their paces by the whos who of the off road world. With tremendous success in competitive rock racing, this tire is already in very high demand. The Axial S30 compound will offer the performance you have come to expect from Axial.
  • Method IFD beadlock wheels
    Based off the Method MR101s these officially licensed wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 or SCX10. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress up with a new look.
  • Icon Vehicle Dynamics aluminum shocks
    These featured Icon Vehicle Dynamics aluminum shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability.
  • Heavy duty gear
    The heavy duty gear set offers you improved gear mesh reducing slop in the drive train. In addition it helps add weight low down which helps keep the center of gravity low and on the rocks where you want it. Made from high grade steel and hardened for increased strength.
  • Realistic scale details
    Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, three white styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points. Includes realistic driver figures complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motor sport version of the helmet are included, choose your own style!
  • Length: 495mm
  • Width: 312mm
  • Height: 195mm
  • Wheelbase: 360mm
  • Ground Clearance: 50mm
  • Weight (with electronics): 2.9kg
  • Axial Yeti Rock Racer 1/10 Scale EP 4WD-KIT x1
  • Body x1
  • Tires & wheels
  • Radio gear set
  • Rcevier
  • Servo
  • ESC
  • Motor
  • Batteries
  • Charger

Description

The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and independent front suspension. Its built to withstand the punishment of rock racing at a high level of performance. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles. The Yeti is a no-compromise mix of speed and handling unlike any other R/C vehicle. Its strategically engineered design supplies bashing stamina while delivering a high level of technical rock racing abilities without compromise in either category. Its powered by a 3150KV 4-pole brushless motor which provides the perfect amount of torque and speed for this rock racing monster. The long can design provides a massive amount of power, especially when powered by 3S. In the suspension department, the Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling.

ROCK RACING
Rock Racing is the next up and coming form of R/C off road racing. Enthusiasts are taking it upon themselves to go back to the dirt with tracks composed of loose surfaces and big rocks. Its distinct aesthetic and technical elements were inspired by full-size desert trucks and various off road vehicles, especially rock racers, which are built for high speed performance through flat desert sections, and durability when tackling extreme off road terrain.

SKILLFULLY ENGINEERED
The Yeti is a skillfully engineered rock racing vehicle with a solid rear axle and an independent front suspension that supplies unforgiving bashing stamina while delivering a high level of technical rock racing abilities without compromising in either category.

INDEPENDENT FRONT SUSPENSION
The Yeti is equipped with an Independent Front Suspension [IFS] system to help maintain high speed stability when running through a diverse range of terrain. Every rock the Yeti will encounter is individual. They come in random sizes and are scattered throughout the course, making the terrain varied from one side of the vehicle to the other. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.

Features

3150KV BRUSHLESS MOTOR, WATERPROOF
The included 3150KV 4-pole brushless motor provides the perfect amount of torque and speed for this rock racing monster. The long can design provides a massive amount of power, especially when powered by 3S. Whether ripping through the fields or negotiating technical terrain, this power plant has you covered.

VANGUARD ESC, 3S LIPO, WATERPROOF
Developed by Castle Creation for Axial, the Vanguard ESC provides exceptional power, braking and adjustability. The ESC comes standard with Deans® Ultra Plugs®. The ESC can be programmed manually via Castle Field Programming Card or through the Castle Link software interface (optional).

ALUMINUM SHOCK BODIES
Usually an option from Axial, these aluminum shock bodies are standard equipment in this RTR Yeti, making for very smooth suspension movement throughout the full range of wheel travel. These bodies are precision machined for consistent handling when putting the Yeti through its paces.

AR60 OCP-AXLE
The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
Off-center pumpkin design
Axle tubes are reinforced with a boxed-in axle truss
High strength composite material

4-LINKED REAR SUSPENSION
The Yetiâ„¢ features the proven AR60 rear axle with a completely new 4-linked rear suspension. The Yetiâ„¢ chassis offers three upper link positions to adjust the anti-squat. The lower link mounts can be flipped to change the roll center. These advanced tuning options will help you get the most performance from your rig.

LONG TRAVEL REAR SWAY BAR
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.

BFGOODRICH® KRAWLER T/A® KX TIRES
In the full-size offroad world, BFGoodrich® Krawler T/A® KX tires are the winner of more rock-crawling championships than all other tires combined (Race spec tire, Years 2004 through 2008). The Axial version of this tire captures the same aggressive look and provides awesome performance on a wide variety of surfaces. This is the perfect tire for this style of vehicle due to it's high level of performance and diversity.

WALKER EVANS RACING WHEELS
Officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner (beadlock) ring. The position is locked with reassembly.
Three piece beadlock design
Utilizes new 2x11mm pins for added strength
Updated plastic hub adapter to eliminate slop and capture the new 2x11mm pin 
Adjustable breather holes for fine tuning tire performance 
Compatible with most 2.2 tires 
Easy six screw disassembly

WB8 HD WILDBOAR REAR DRIVESHAFT
The WB8 HD rear driveshaft features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

WB8 HD CENTER CVD JOINT
The WB8 HD Wildboar Driveshaft Joint is employed from the transmission to the front bulkhead. It features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength.

DUAL SLIPPER CLUTCH
Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

HI-LO TRANSMISSION
The Axial Hi-Lo transmission was specifically designed for the Yeti chassis. With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment and brushless power. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Optional two-speed transmission component sold separately.

DUAL SHEAR STEERING RACK
The Yeti features an updated EXO steering rack that offers additional strength for 2.2 size tires, and double shear capture points on the steering tie rods for ready-to-go rock racing action!

FULLY ADJUSTABLE BATTERY TRAY
The integrated battery tray can be easily accessed by removing the two front body pins and pivoting up the entire body. Gain full access to the battery trap door by removing the remaining body pin. The battery tray is fully height adjustable with four button head screws, making room for most standard sized 2S and 3S LiPo battery packs.

REALISTIC SCALE DETAILS
Realistic scale details include: polycarbonate interior tray with molded driver figures and dashboard, two black styrene helmets, molded exhaust outlets, molded grill, molded headlight buckets, and molded hood vents. The body bolts to the scale Y-380 cage assembly using multiple mounting points.

2.4GHz RADIO FOR WORRY-FREE DRIVING
The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low.

3-CHANNEL 2.4GHz RECEIVER
The AR-3 2.4 GHz receiver uses no crystals so youll experience worry free driving with no frequency conflicts. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!

RECEIVER BOX, WATERPROOF
The new waterproof receiver box is integrated into the bottom of the Yeti chassis. Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!

METAL GEAR TACTIC SERVO, 151 oz-in,
WATER RESISTANT
The included Tactic TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.

Required to Complete

  • 2-3 cell LiPo Battery

  • Charger to suit LiPo

  • AA Batteries for transmitter

This highly scale detailed Outbreak Response Vehicle (ORV) is packed with features to help you outrun, run over, or run through the living dead and away to safety. Whether you’re on the asphalt or on the rough stuff the Lynx ORV and its permanent 4x4 drive system is equipped to deal with just about anything.