Skip to content
Australia's Largest Hobby Retailer

Other Scales

Kyosho 1/7 GP2SCO RSET Scorpion B-XXL Black w/2.4GHz KYO-31875 Kyosho 1/7 GP2SCO RSET Scorpion B-XXL Black w/2.4GHz KYO-31875
$799.00
In stock

1/7 scale Baja Racer powers through in style!

Big bore engine and special body design produce dynamic performance!

Matt grey base color and smoked windows are the perfect combination on this Baja Racer body with stylish 111 (One Eleven) graphics providing the finishing touch to the coolest off-roader around. Rugged block pattern tires on bare bolt beadlock wheels create a formidable sense of presence from the big 1/7 scale power of the Baja Racer Scorpion B-XXL Readyset. The proven Scorpion XXL chassis at its core has been enhanced with unique specifications that can be seen throughout, including the red springs on the oil shocks. Engine size has been muscled up from 28 to 32 and a revised gear ratio delivers sharp acceleration and increased top speed. The increased power is matched with mild control characteristics to allow aggressive driving performance. This user-friendly Readyset supports its power and performance with a large capacity suspension system to take on big jumps with confidence. For the ultimate off-road experience, here is a machine that delivers excitement like no other!



●Just add fuel and batteries to this factory assembled Readyset.

●Equipped with big bore high-power KYOSHO XXL32R engine, fitted with recoil starter.

●Includes wide torque band tuned muffler with effective sound suppression.

●Equipped with large capacity slipper clutch as standard.

●Hex screws provide precision assembly and high rigidity.

●Installed with high-strength plastic shock stays. Provides reliable suspension movement.


Technical Specs

■Length: 665mm

■Width: 430mm

■Height: 230mm

■Wheelbase: 435mm

■Tread(F/R): 365 / 365mm

■Tire(F/R): Φ140×55mm / Φ140×55mm

■Gear Ratio: 15:1

■Weight: 5,400g approx. (with body)

■Engine: KYOSHO XXL32R

■RC System: 2.4GHz Syncro KT-201


REQUIRED FOR OPERATION

●AA alkaline batteries for transmitter and receiver x 8

●Engine starting tools

Kyosho 1/7 GP2SCO RSET Scorpion XXL White w/2.4GHz KYO-31873T1 Kyosho 1/7 GP2SCO RSET Scorpion XXL White w/2.4GHz KYO-31873T1
$859.99
In stock

Menacing looks and performance to match!

Looks BAD, runs good! Easy to run, tough on the competition!

With a chassis and power source combination that delivers a sharp control feel, the concept of large-scale off-roaders has been altered forever with the introduction of the Scorpion XXL VE 2WD racing buggy.

This high-performance racing weapon dominates land and air with the power to charge over big jumps through off-road racing circuits and rough terrain.

Now a powerful GP model joins the Scorpion XXL series that stormed across the world with its sharp control feel around the suspension and chassis layout with centralized weight featuring a midship mounted XXL engine fitted with pull starter. The unique design effectively maintains rear traction while reducing the under steer characteristic of 2WD vehicles. The full benefits of the engine power source are captured while the suspension is even more flexible than the VE model to deliver a unique finish despite the number of components shared across both chassis platforms.

A waterproof RC system including the KS203 servo incorporating metal gears delivers a sharp response with (4 x AA) alkaline batteries through the KR200 receiver with failsafe function and the 2.4GHz KT201 transmitter featuring an LCD display for precision setting adjustments.

With the XXL engine mentioned above included, high torque delivers dynamic big scale car performance while the long manifold and large silencer generate additional power output. A large 210cc fuel tank delivers run times of more than 12 minutes while the fuel tank cap is styled as an air intake to add even more character to the model. The easy-start engine is also simple to switch off with the newly developed cutoff switch. These enhancements are designed to make owning and running a GP engine model simpler and easier than ever before.

The throbbing sound of engine power and exhaust build performance expectations that this big scale buggy can meet and exceed as you experience off-road racing like never before!


Technical Specs

■Length 630mm

■Width 402mm

■Height 244mm

■Wheelbase 452mm

■Tread (F/R) 353 / 331mm

■Tire(F/R) Φ130×43mm / Φ140×71mm

■Gear Ratio 16.0:1

■Weight 4000g(with body)

■Engine XXL Engine (.28 class)


REQUIRED FOR OPERATION

●AA-sized alkaline batteries x 8 for transmitter/receiver

●Engine starting tools

Team Losi 5IVE-B 1/5 4WD Race Tuned Buggy Kit Team Losi 5IVE-B 1/5 4WD Race Tuned Buggy Kit
$1,799.99
Temporarily Out of Stock

Description

Overview

Like the championship-winning 8IGHT platform on which it is based, the big 5IVE-B buggy has been engineered for one thing-winning races. No mere RTR conversion, it is a purpose-designed racing kit that can be equipped to your standards.

The 5IVE-B buggy is the 1/5-scale kit for hardcore racers who dont want to settle for anything but the best. The 5IVE-B has been designed from the ground up to the exacting standards of TLR® engineering and includes standard features you simply wont find in anything else.

Features:

  • Purpose-built, racing kit based on the 8IGHT platform

  • Hard-anodized, 5mm 6061-T6 aluminum chassis plate

  • Heavy duty brakes

  • Dual-steering-servo radio tray

  • Cab-forward racing body

  • Racing wing with removable wicker bill

  • Aluminum clutch carrier and center-diff case

  • Hard-anodized, 24mm aluminum shocks with bleeder caps

  • AHard-anodized aluminum shock towers with multiple mounting holes

  • Light, one-piece, glue-style wheels

  • Specially designed air filter for racing engines

  • Protective axle boots

  • Adjustable toe and anti-squat plates

Purpose-Built Racing Chassis

Unlike lesser 1/5-scale basher-based buggies modified for racing the Team Losi Racing 5IVE-B has been designed for one purpose: Racing. The 5IVE-B features a 5mm 6061-T6 aluminum chassis specifically engineered for competition. The chassis plate has been inspired by the legendary TLR 8IGHT platform, featuring a shorter wheel base than others for improved handling. The chassis plate also has milled pockets that save weight and allow enough flex for maximum traction under hard acceleration.

Heavy Duty Braking System

The 5IVE-B features stamped-steel rotors and, when combined with the heavy duty plates and pads, provide a sense of confidence and control that allows racers to drive harder into corners and come to a stop more quickly. Front-to-rear braking bias can also be fine-tuned for evolving track conditions.

Dual-Steering-Servo Radio Tray

The 5IVE-B radio tray has been designed to accommodate the most powerful 1/5-scale steering servos available. This includes the Spektrum line of 1/5-scale servos with patent-pending Back EMF technology that prevents servo fade and maintains maximum holding power for the duration of a receiver pack.

Racing Body and Wing

The 5IVE-B body has been inspired by those used on 1/8-scale racing buggies, featuring a cab-forward design. This distinctive shape provides greater front down force which improves steering. The wing features a removable wicker bill for tailoring the rear down force to meet the precise track conditions.

Aluminum Clutch Carrier and Center Diff Case

The 5IVE-B features race-bred drive system engineered to exacting standards to harness the power of a high-output gas engine during the most-extreme conditions. The clutch and center differential are both CNC-machined aluminum, providing strength and durability while helping to dissipate heat, keeping things cool and providing more consistent performance throughout a run.

Hard-Anodized Aluminum Shocks and Shock Towers

The hard anodized 24mm shocks include bleeder caps that make them easier to build without sacrificing performance. The machined aluminum shock towers offer multiple shock mounting options that give racers an abundance of tuning options for different track conditions.

One-Piece Glue-Style Wheels

The low rotational mass of these wheels allow the 5IVE-B to accelerate faster with less stress on drivetrain components.

Air Filter Designed Specifically for the 5IVE-B Buggy

Whatever 25cc-to-32cc engine you install in your buggy the included air filter has been designed for maximum air flow to the carb while keeping dirt, grit and debris out of your engine. This translates into an air filter which provides maximum protection while unleashing the monster horsepower your engine was built for.

Axle Boots

Molded rubber boots on the CVAs and center drive train dog bones increase U-joint life. The boots help keep grease in and dirt out so your axles last longer and require less maintenance.

Adjustable Toe and Anti-Squat Plates

For maximum tuning the 5IVE-B includes adjustable front and rear A-Arm mounts. By swapping out inserts you will be able to fine tune your car by altering the toe-in, anti-squat to maximize the traction and overall performance of the chassis.

Hard-anodized Race Chassis

There's no pressed chassis here, milled from hard-anodized 5mm aluminium, the chassis is lightweight and will flex which increases handling and traction in corners whilst maintaining strength. There's no doubt that you'll be leaving the bashers in your dust!

Being based from the TLR 8IGHT, the chassis is slightly shorter than most so you can be sure you'll always corner faster.

Break Records, with this Braking System

Stamped steel rotors come standard with the TLR 5IVE-B Race Kit, these combined with the high strength plates and pads let you know that you are in control at all times.

Dive into the corners harder and break track records! Braking bias can be set between the front and rear brakes, meaning you will always be able to stop no matter the track conditions!

Dual Servos for Greater Control

The TLR 5IVE-B is ready for any dual 1/5th scale servos you chose to manoeuvre this bad boy around the track so you wont be stuck filing out the tray to try to squeeze your new servos into the slot. Running two servos will allow more direct turning and increase reliability.

Distinctive Cab Forward Style Body

The TLR 5IVE-B 4WD Race Tuned Buggy Kit includes a cab forward style body, motivated by the popular 1/8th scale buggies. This all-new shape gives you the brunt you need in the front, so you're steering better than ever. And you can remove the wicker bill on the wing customising the rear down force to match the track environment.

Strong, CNC-Machined Aluminium Clutch & Centre Differential

Born to race, the 5IVE-Bs drive system is ready to show off its power. It's high-output gas engine takes you to #1 position, no matter what condition you're driving in. And nothing can shake the clutch and centre differential both made with CNC-machined aluminium. Even as things are heating up in the race, the 5IVE-B will keep its cool.

The 24mm hard-anodised shocks boast bleeder caps. And you have loads of choice with the machined aluminium shock towers. Mount them where you'd like to, so you can tune to your specific track condition.

Accelerate Faster, with One-Piece Wheels

You'll love how you can take off faster, with the low rotational mass of these wheels. And they come in one piece, which is even better!

As long as you're installing an engine that's 25cc to 32cc, the air filter in the 5IVE-B will keep unwanted fragments of your engine while performing at 100%.

Increased U-joint Life

The U-joint will be operating for longer, as the rubber boots on the CVAs and centre drivetrain dog bones have been intelligently moulded. Forget about grease and grime on your axles.

Tune until your hearts content with the adjustable front and rear A-Arm mounts. Increase the traction and performance of the chassis by playing switcheroo with the inserts. Fine-tuning your car has never been easier.

What you Need

  • 26-29cc Gas engine with Exhaust. We recommend Dynamite Engine (DYNE1175) or Losi Engine (LOSR5001)
  • Radio. We recommend the Spektrum DX4R (SPM4100) or Spektrum DX6R (SPM6400)
  • 3 x 1/5 Scale Servos. We recommend Spektrum S9010 (Throttle) (SPMSS9010) and Spektrum S9020 (Steering) (SPMSS9020)
  • Battery. We recommend Dynamite 7.4V 5200mAh LiPo Battery (DYNB0500)
  • Modeling Tools

Specifications

Type: 1/5 Scale 4WD Buggy

Length: 32.75 - 33.25 in (831.8 - 844.5mm) Total length can change based on the wing mount spacer used

Width: 18.0 in (457.2mm)

Height: 12.13 in (308mm)

Ground Clearance: 3.5 in (88.9 mm)

Wheelbase: 22.75 in (577.9mm

Weight: 30.5 lbs (13.8kg)

Chassis: 5mm Plate, 6061-T6 Aluminum

Suspension: 4-Wheel Independent

Gear Pitch: 1.5 Module

Wheel Size: 5.5 in (139.7mm) x 2.5 in (63.5mm)

Kit/RTR: Kit

Shock Type: 24mm, Hard Anodized, Oil Filled with Bleeder Caps

Body: Clear

Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing

Fuel Tank Capacity: 27.1 oz (800cc)

Experience Level: Advanced

Recommended Environment: Outdoor

Assembly Time: 7-9 Hours

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

1/7 scale Baja Racer powers through in style!

Big bore engine and special body design produce dynamic performance!

Matt grey base color and smoked windows are the perfect combination on this Baja Racer body with stylish 111 (One Eleven) graphics providing the finishing touch to the coolest off-roader around. Rugged block pattern tires on bare bolt beadlock wheels create a formidable sense of presence from the big 1/7 scale power of the Baja Racer Scorpion B-XXL Readyset. The proven Scorpion XXL chassis at its core has been enhanced with unique specifications that can be seen throughout, including the red springs on the oil shocks. Engine size has been muscled up from 28 to 32 and a revised gear ratio delivers sharp acceleration and increased top speed. The increased power is matched with mild control characteristics to allow aggressive driving performance. This user-friendly Readyset supports its power and performance with a large capacity suspension system to take on big jumps with confidence. For the ultimate off-road experience, here is a machine that delivers excitement like no other!



●Just add fuel and batteries to this factory assembled Readyset.

●Equipped with big bore high-power KYOSHO XXL32R engine, fitted with recoil starter.

●Includes wide torque band tuned muffler with effective sound suppression.

●Equipped with large capacity slipper clutch as standard.

●Hex screws provide precision assembly and high rigidity.

●Installed with high-strength plastic shock stays. Provides reliable suspension movement.


Technical Specs

■Length: 665mm

■Width: 430mm

■Height: 230mm

■Wheelbase: 435mm

■Tread(F/R): 365 / 365mm

■Tire(F/R): Φ140×55mm / Φ140×55mm

■Gear Ratio: 15:1

■Weight: 5,400g approx. (with body)

■Engine: KYOSHO XXL32R

■RC System: 2.4GHz Syncro KT-201


REQUIRED FOR OPERATION

●AA alkaline batteries for transmitter and receiver x 8

●Engine starting tools

Menacing looks and performance to match!

Looks BAD, runs good! Easy to run, tough on the competition!

With a chassis and power source combination that delivers a sharp control feel, the concept of large-scale off-roaders has been altered forever with the introduction of the Scorpion XXL VE 2WD racing buggy.

This high-performance racing weapon dominates land and air with the power to charge over big jumps through off-road racing circuits and rough terrain.

Now a powerful GP model joins the Scorpion XXL series that stormed across the world with its sharp control feel around the suspension and chassis layout with centralized weight featuring a midship mounted XXL engine fitted with pull starter. The unique design effectively maintains rear traction while reducing the under steer characteristic of 2WD vehicles. The full benefits of the engine power source are captured while the suspension is even more flexible than the VE model to deliver a unique finish despite the number of components shared across both chassis platforms.

A waterproof RC system including the KS203 servo incorporating metal gears delivers a sharp response with (4 x AA) alkaline batteries through the KR200 receiver with failsafe function and the 2.4GHz KT201 transmitter featuring an LCD display for precision setting adjustments.

With the XXL engine mentioned above included, high torque delivers dynamic big scale car performance while the long manifold and large silencer generate additional power output. A large 210cc fuel tank delivers run times of more than 12 minutes while the fuel tank cap is styled as an air intake to add even more character to the model. The easy-start engine is also simple to switch off with the newly developed cutoff switch. These enhancements are designed to make owning and running a GP engine model simpler and easier than ever before.

The throbbing sound of engine power and exhaust build performance expectations that this big scale buggy can meet and exceed as you experience off-road racing like never before!


Technical Specs

■Length 630mm

■Width 402mm

■Height 244mm

■Wheelbase 452mm

■Tread (F/R) 353 / 331mm

■Tire(F/R) Φ130×43mm / Φ140×71mm

■Gear Ratio 16.0:1

■Weight 4000g(with body)

■Engine XXL Engine (.28 class)


REQUIRED FOR OPERATION

●AA-sized alkaline batteries x 8 for transmitter/receiver

●Engine starting tools

Description

Overview

Like the championship-winning 8IGHT platform on which it is based, the big 5IVE-B buggy has been engineered for one thing-winning races. No mere RTR conversion, it is a purpose-designed racing kit that can be equipped to your standards.

The 5IVE-B buggy is the 1/5-scale kit for hardcore racers who dont want to settle for anything but the best. The 5IVE-B has been designed from the ground up to the exacting standards of TLR® engineering and includes standard features you simply wont find in anything else.

Features:

  • Purpose-built, racing kit based on the 8IGHT platform

  • Hard-anodized, 5mm 6061-T6 aluminum chassis plate

  • Heavy duty brakes

  • Dual-steering-servo radio tray

  • Cab-forward racing body

  • Racing wing with removable wicker bill

  • Aluminum clutch carrier and center-diff case

  • Hard-anodized, 24mm aluminum shocks with bleeder caps

  • AHard-anodized aluminum shock towers with multiple mounting holes

  • Light, one-piece, glue-style wheels

  • Specially designed air filter for racing engines

  • Protective axle boots

  • Adjustable toe and anti-squat plates

Purpose-Built Racing Chassis

Unlike lesser 1/5-scale basher-based buggies modified for racing the Team Losi Racing 5IVE-B has been designed for one purpose: Racing. The 5IVE-B features a 5mm 6061-T6 aluminum chassis specifically engineered for competition. The chassis plate has been inspired by the legendary TLR 8IGHT platform, featuring a shorter wheel base than others for improved handling. The chassis plate also has milled pockets that save weight and allow enough flex for maximum traction under hard acceleration.

Heavy Duty Braking System

The 5IVE-B features stamped-steel rotors and, when combined with the heavy duty plates and pads, provide a sense of confidence and control that allows racers to drive harder into corners and come to a stop more quickly. Front-to-rear braking bias can also be fine-tuned for evolving track conditions.

Dual-Steering-Servo Radio Tray

The 5IVE-B radio tray has been designed to accommodate the most powerful 1/5-scale steering servos available. This includes the Spektrum line of 1/5-scale servos with patent-pending Back EMF technology that prevents servo fade and maintains maximum holding power for the duration of a receiver pack.

Racing Body and Wing

The 5IVE-B body has been inspired by those used on 1/8-scale racing buggies, featuring a cab-forward design. This distinctive shape provides greater front down force which improves steering. The wing features a removable wicker bill for tailoring the rear down force to meet the precise track conditions.

Aluminum Clutch Carrier and Center Diff Case

The 5IVE-B features race-bred drive system engineered to exacting standards to harness the power of a high-output gas engine during the most-extreme conditions. The clutch and center differential are both CNC-machined aluminum, providing strength and durability while helping to dissipate heat, keeping things cool and providing more consistent performance throughout a run.

Hard-Anodized Aluminum Shocks and Shock Towers

The hard anodized 24mm shocks include bleeder caps that make them easier to build without sacrificing performance. The machined aluminum shock towers offer multiple shock mounting options that give racers an abundance of tuning options for different track conditions.

One-Piece Glue-Style Wheels

The low rotational mass of these wheels allow the 5IVE-B to accelerate faster with less stress on drivetrain components.

Air Filter Designed Specifically for the 5IVE-B Buggy

Whatever 25cc-to-32cc engine you install in your buggy the included air filter has been designed for maximum air flow to the carb while keeping dirt, grit and debris out of your engine. This translates into an air filter which provides maximum protection while unleashing the monster horsepower your engine was built for.

Axle Boots

Molded rubber boots on the CVAs and center drive train dog bones increase U-joint life. The boots help keep grease in and dirt out so your axles last longer and require less maintenance.

Adjustable Toe and Anti-Squat Plates

For maximum tuning the 5IVE-B includes adjustable front and rear A-Arm mounts. By swapping out inserts you will be able to fine tune your car by altering the toe-in, anti-squat to maximize the traction and overall performance of the chassis.

Hard-anodized Race Chassis

There's no pressed chassis here, milled from hard-anodized 5mm aluminium, the chassis is lightweight and will flex which increases handling and traction in corners whilst maintaining strength. There's no doubt that you'll be leaving the bashers in your dust!

Being based from the TLR 8IGHT, the chassis is slightly shorter than most so you can be sure you'll always corner faster.

Break Records, with this Braking System

Stamped steel rotors come standard with the TLR 5IVE-B Race Kit, these combined with the high strength plates and pads let you know that you are in control at all times.

Dive into the corners harder and break track records! Braking bias can be set between the front and rear brakes, meaning you will always be able to stop no matter the track conditions!

Dual Servos for Greater Control

The TLR 5IVE-B is ready for any dual 1/5th scale servos you chose to manoeuvre this bad boy around the track so you wont be stuck filing out the tray to try to squeeze your new servos into the slot. Running two servos will allow more direct turning and increase reliability.

Distinctive Cab Forward Style Body

The TLR 5IVE-B 4WD Race Tuned Buggy Kit includes a cab forward style body, motivated by the popular 1/8th scale buggies. This all-new shape gives you the brunt you need in the front, so you're steering better than ever. And you can remove the wicker bill on the wing customising the rear down force to match the track environment.

Strong, CNC-Machined Aluminium Clutch & Centre Differential

Born to race, the 5IVE-Bs drive system is ready to show off its power. It's high-output gas engine takes you to #1 position, no matter what condition you're driving in. And nothing can shake the clutch and centre differential both made with CNC-machined aluminium. Even as things are heating up in the race, the 5IVE-B will keep its cool.

The 24mm hard-anodised shocks boast bleeder caps. And you have loads of choice with the machined aluminium shock towers. Mount them where you'd like to, so you can tune to your specific track condition.

Accelerate Faster, with One-Piece Wheels

You'll love how you can take off faster, with the low rotational mass of these wheels. And they come in one piece, which is even better!

As long as you're installing an engine that's 25cc to 32cc, the air filter in the 5IVE-B will keep unwanted fragments of your engine while performing at 100%.

Increased U-joint Life

The U-joint will be operating for longer, as the rubber boots on the CVAs and centre drivetrain dog bones have been intelligently moulded. Forget about grease and grime on your axles.

Tune until your hearts content with the adjustable front and rear A-Arm mounts. Increase the traction and performance of the chassis by playing switcheroo with the inserts. Fine-tuning your car has never been easier.

What you Need

  • 26-29cc Gas engine with Exhaust. We recommend Dynamite Engine (DYNE1175) or Losi Engine (LOSR5001)
  • Radio. We recommend the Spektrum DX4R (SPM4100) or Spektrum DX6R (SPM6400)
  • 3 x 1/5 Scale Servos. We recommend Spektrum S9010 (Throttle) (SPMSS9010) and Spektrum S9020 (Steering) (SPMSS9020)
  • Battery. We recommend Dynamite 7.4V 5200mAh LiPo Battery (DYNB0500)
  • Modeling Tools

Specifications

Type: 1/5 Scale 4WD Buggy

Length: 32.75 - 33.25 in (831.8 - 844.5mm) Total length can change based on the wing mount spacer used

Width: 18.0 in (457.2mm)

Height: 12.13 in (308mm)

Ground Clearance: 3.5 in (88.9 mm)

Wheelbase: 22.75 in (577.9mm

Weight: 30.5 lbs (13.8kg)

Chassis: 5mm Plate, 6061-T6 Aluminum

Suspension: 4-Wheel Independent

Gear Pitch: 1.5 Module

Wheel Size: 5.5 in (139.7mm) x 2.5 in (63.5mm)

Kit/RTR: Kit

Shock Type: 24mm, Hard Anodized, Oil Filled with Bleeder Caps

Body: Clear

Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing

Fuel Tank Capacity: 27.1 oz (800cc)

Experience Level: Advanced

Recommended Environment: Outdoor

Assembly Time: 7-9 Hours