Skip to content
Australia's Largest Hobby Retailer

Buggies

Arrma 1/8 Typhon RTR Red/Black Expert Arrma 1/8 Typhon RTR Red/Black Expert
$599.99
Temporarily Out of Stock

Description

Styled to turn heads, from the local bashing spot to the club race track, the TYPHON 6S looks serious, straight from the box.

Unleashing the equipped BLX brushless system will allow you to master 6S LiPo battery power on a wide range of extreme surfaces. The TYPHON 6S is ready for action.

A low-profile Polycarbonate body shell, and race-inspired multi-spoke black nylon wheels, are combined with a high-downforce rear wing for refined performance in the most extreme driving environments.

With track-inspired handling and super-tough bashing build quality, your TYPHON 6S will put you in control of exhilarating RC driving action, straight from the box. Rip up your local dirt bowl, blast across the mall parking lot, launch huge jumps at the skate park. The TYPHON 6S can do it all.

Big bore red anodized aluminum shocks provide a plush driving experience, even on the roughest terrains.

Triple diff equipped and ready to command the roughest environments, from the first time you pull the trigger, you will understand what BLX brushless power is designed to do. More power, more speed, more excitement. You control how it happens.

Fully loaded with premium waterproof electronics, the TYPHON 6S is ready to challenge high-speed parking lot runs, then blast through the mud, dirt, water and snow at your local bashing spot.

The TYPHON 6S is built around a black anodized aluminum chassis plate, giving this BLX brushless powered bashing machine a strong and durable platform for ultimate performance.

Black anodized front and rear shock towers provide reduced weight and increased durability, the perfect combination when you unleash the 6S LiPo capability of this super-tough 1/8 4WD electric speed buggy.

Equipped with triple oil-filled diff units, front, middle and rear, hammering the throttle and getting the power down in all conditions is effortless and consistent. All metal diff gears provide long-lasting durability and soak up the punishment as you bash hard.

Standing out from the crowd is easy when you pilot the TYPHON 6S. A super-detailed and pre-painted body shell provides increased protection against the elements. Steel driveshafts and super-durable composite suspension arms and hubs make your journey into wild locations even easier.

A pillow ball suspension set-up keeps the TYPHON 6S handling super-smooth, no matter what you throw at it.

A strengthened rear wing mount provides added durability, meaning you can hit the biggest jumps and fly like a bashing Pro, time after time. The included steel anti-roll bars allow the TYPHON 6S to handle like a premium race vehicle, whilst providing an advanced tuning option as your experience grows.

Equipped with an adjustable battery tray, your chosen battery cell position can be adjusted, changing the weight balance of the TYPHON 6S for specific driving styles. Secured with super-strong hook and loop straps, hassle-free battery cell changes are performed in seconds.

Ultra-strong composite chassis side pods provide increased protection from dirt and water ingress when the bashing action gets extreme.

Aggressive and hard-wearing dBoots all-terrain tires are mounted on strong black nylon wheels, giving you the traction you need to put the BLX brushless power straight into your chosen surface. 17mm wheel hex fittings allow the use of a wide range of third party wheel and tire combinations, meaning you can switch your rubber if you choose to go and hit the local race track.

The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.

Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.

The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.

Recommended battery specification: 5000mAh - 35C minimum - Per battery pack

The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with our BLX185 ESC unit.

A beautifully etched black aluminum motor can provides a premium look, whilst a 4 pole internal configuration keeps the power supply smooth and consistent.

Gold bullet connectors provide fast and easy wire removal when you need to clean down your vehicle.

The aluminum motor can provides increased heat dissipation from the finned body section.

A dual motor shaft flat section provides a safe and secure pinion gear fitting.

The TTX300 radio system will provide fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.

Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.

Axial 1/8 Yeti XL 4WD Monster Buggy RTR AX90032 Axial 1/8 Yeti XL 4WD Monster Buggy RTR AX90032
$869.99
Temporarily Out of Stock
Axial 1/8 Yeti XL 4WD Monster Buggy RTR
HPI 1/8 Trophy Buggy Flux EP RTR with 2.4Ghz RC HPI 1/8 Trophy Buggy Flux EP RTR with 2.4Ghz RC
$699.00
In stock

Description

The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that its fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price! Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.4 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!

2.4GHz RADIO SYSTEM

Ready-built right out of the box and fitted with an all-new 2.4GHz radio system, the Trophy Buggy Flux is the perfect introduction to serious 1/8th off-road buggies! No need to worry about changing crystals, the radio prevents frequency conflicts automatically. If the car ever loses radio signal or battery power, an electronic failsafe will bring it to a safe and controlled stop. You get big-air fun and race-track performance in one easy RTR package!.

If youre looking for a powerful, versatile and FAST brushless system, you dont have to look any further than the combination of the HPI Flux Scream motor and Flux Rage speed controller! The Flux Scream motor is the perfect match for the Rage speedo: with 1965KV of power, it was designed from the ground up to be bolted into 1/8th scale off-road vehicles to give you the explosion of power you want from any car or truck! The Flux Rage is a monster of a speedo: able to handletwin 2S batteries for up to 4S (14.4 volt!) power, you will experience mind-bending top speeds and blindingly fast acceleration for huge stunts, massive jumps and burly maneuvers that will make your jaw drop! Also, if you ever want to change your speedo settings, youll be able to experiment easily with the 101280 2 in 1 Professional Program Card! You can change the amount of braking the speedo uses on the motor, reversing speed, motor timing and even the motor for accelerating smoothly in different traction conditions!

The chassis of the Trophy Buggy Flux is based on the nitro version of the Trophy Buggy, so its ready for anything you can throw at it. The aluminium construction provides the perfect foundation with its combination of low weight and high strength, and the smart design and layout of the components make working on the car fast and easy!

  • 4mm 6061 aluminium chassis has angled sides for extra stiffness
  • Fits two hard-case 2S LiPo batteries with adjustable battery holders and hook & loop straps
  • Low-profile aluminium radio tray securely mounts servos
  • Tough front bumper protects against crash damage
  • Enclosed radio box protects battery and receiver from the elements
  • Low centre of gravity design for top handling in the turns
  • Adjustable mounts for the wide racing wing
HPI Vorza Flux RTR With 2.4Ghz HPI Vorza Flux RTR With 2.4Ghz
$899.00
Temporarily Out of Stock

Description

BREAK THE SPEED LIMIT AND MAKE HUGE, RECORD-SETTING JUMPS 

With the World Championship-winning HB D8 buggy as its foundation, the Vorza takes the race-winning design of the D8 and mixes it up with HPI Flux HP tech from the Savage Flux HP to give you awe-inspiring speed! This is a ready to run (RTR) buggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any buggy track for top-level racing action - it will turn heads and amaze your friends! The Vorza has everything that backyard bashers and racers want! The Vorza Flux HP is our FASTEST buggy, able to reach speeds over 60 mph*! Can you imagine an electric buggy going that fast? The Flux ELC-6S speed controller takes 2 batteries, allowing you to fit in up to 6S of LiPo power for utterly insane top speeds and mind-boggling take-off power!

The RTR Vorza Flux HP chassis features a wide range of excellent features, making it suitable for serious bashing AND racing! An esteemed race-winning heritage, amazingly powerful motor and speed controller combination and stupendous raw speed and power are just the beginnings of the Vorza Flux HP story! With many parts taken directly from the World Champion HB D8 racing buggy, the Vorza is ready to hit the track any time, any place! With World Champion DNA from the HB D8, you get complete adjustability in the suspension and even a tunable drivetrain, if you want to experiment to tune your Vorza Flux HP for fast lap times. 

Loaded with high-strength standard parts, World Championship-winning reliability and toughness and a monstrous amount of power and speed, the Vorza Flux HP is the ideal high speed, big air buggyfor serious bashers! 

Kyosho 1/8 EP 4WD Kit Inferno MP9e TKI KYO-30897B Kyosho 1/8 EP 4WD Kit Inferno MP9e TKI KYO-30897B
$949.00
Temporarily Out of Stock

Supercharged MP9e version is the choice of the world's top drivers!

TKI specification is packed with special performance parts!

With interest first sparked in Europe and America, 1/8 electric buggy racing has now emerged as a supercharged racing category around world. Electric versions of the world dominating GP Inferno MP9 have been optimized for electric power and the introduction of the MP9e has built a following amongst the world's top drivers with its racing power and speed. A new TKI version extends this competitive advantage to an even higher level. Featuring the most advanced components available, the MP9e TKI is fully equipped to win and worthy of Kyosho's international factory team (TKI) brand. With improvements to the Inferno's renowned strength and durability, precision components add even more racing speed that can be fine tuned with a wider scope for custom settings. Aiming to be the best in its class, the Inferno MP9e TKI is your road to glory in 1/8 EP buggy racing!


Technical Specs

Length 490mm

Width 307mm

Height 180mm

Ground Clearance 28mm

Wheelbase 325mm (change rear hub collar positions - 4 settings)

Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

Tire(F/R) Sold separately

Gear Ratio 12.6:1

Weight 3,500g (with 5000 Lipo)


REQUIRED FOR OPERATION

2-channel, 1-servo R/C system

Brushless motor

ESC for brushless motor

Two Li-Po batteries for chassis

Battery charger

Tires

Wheels

Tire inners

Shock oil

Paint for body

Battery for R/C system

[CAUTION] model will function Ni-MH and Ni-Cd batteries but may not deliver performance as designed.

Kyosho 1/8 EP 4WD Kit Inferno MP9e TKI4 Kyosho 1/8 EP 4WD Kit Inferno MP9e TKI4
$1,039.99
Temporarily Out of Stock

Enjoy the thrill of pure buggy racing with the increased speed and performance of the 1/8 scale electric Inferno MP9 TKI4!

With an impressive TQ in qualifying and a 2nd finish at the IFMAR 1/8 scale engine off road world championship in Las Vegas in October 2016, the INFERNO MP9 TKI4 demonstrated to everyone just how fast it really is. With its formidable controlled speed, the electric powered MP9e TKI4 inherits the INFERNO’s flat controllability, superior airborne posture and great agility through optimal mass concentration and lower center of gravity. Shared components from the new MP9 TKI4 design such as longer front sus arms, front sus holder, front shock stay, rear wing and wing stay also realize increased compatibility on low through to high grip surfaces to meet the individual demands of each driver. This design update not only delivers improved running performance but also the essential elements for racing victory in the form of a complete revision for improved maintenance efficiency and higher durability. Designed and built with a sole focus on racing to win, the pure racing specifications of the MP9e TKI4 will put you on the road to glory!


●Minor change model incorporates parts from the INFERNO MP9 TK14.

●4WD with 3-diff shaft drive and 4-wheel independent double wishbone suspension contributes to low C of G.

●Aluminum knuckles optimize akerman for smoother cornering.

●Thicker ball end on the steering tie rod increases durability.

●Revised design of mounting pin for the oil shock arm allows more secure installation and improves durability.

●Revised design of catch prevents damage to the shock boots.

●Features heavy-duty universal shafts on front & rear drive shafts and center shaft.

●Dirt guards on rear sus arm protect the drive system.

●Equipped with popular forward cabin type body.

●Full ball bearing specifications.

●Compatible with a wide range of INFERNO MP9 TKI4 optional parts.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Wheelbase 325mm (Wheelbase can be adjusted by changing the rear hub collars.)

■Tread (F/R) 254mm

■Tire(F/R) sold separately

■Gear Ratio 12.7:1

■Weight 3,370g approx.


REQUIRED FOR OPERATION

2ch 1 servo R/C system

Batteries for R/C system

Brushless motor

ESC for brushless motor

2 batteries for chassis

Battery charger

Tires

Wheels

Tire inners

Tools

Instant glue

Silicon oil for shocks

Paint for coloring body

Kyosho 1/8 EP 4WD r/s Inferno MP9e TKI T1 White/Black Kyosho 1/8 EP 4WD r/s Inferno MP9e TKI T1 White/Black
$899.99
In stock

Experience 8-time World Championship winning performance in electric power!

Readyset makes it easy for everyone to enjoy world-class performance!

The world-beating performance of Inferno MP9 TKI is now available in electric power with the launch of the MP9e TKI Readyset. Simply switch ON and feel the power surge with instant acceleration to full speed. With precision control and handling, the MP9e marks a new era in electric buggy performance that is ready to take on any type of course. The TKI (Team Kyosho International) brand marks this MP9e as a fully equipped race spec version with the Inferno’s superior racing performance and wide scope for setting options. Expert racers to beginners can enjoy breathtaking performance on any off-road circuit with this fully pre-assembled Readyset packaged with the 2.4GHz large LCD screen KT-331P transmitter and fast response/high torque KS-5031-09MW servo installed. Combined with the powerful Team Orion NEON8 brushless motor, anyone can experience and enjoy the very best electric off-road performance.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Ground Clearance 28mm

■Wheelbase 325mm (change rear hub collar positions - 4 settings)

■Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

■Tire(F/R) 116 x 44mm (F/R)

■Gear Ratio 12.6:1

■Weight 3,370g approx.

■Motor Team Orion NEON8 Brushless

■Battery 7.2V NiMH x 2 (recommended : Sports Power 4500/with super plug)

■Battery Note Super (Deans) plug only


REQUIRED FOR OPERATION

●7.4V LiPO battery x 2 (recommended:Peak Powermax 4200) both Super Plug specification

●Battery charger (recommended / Team ORION ORI30126)

●4 x AA alkaline batteries for transmitter

Kyosho 1/8 EP 4WD Readyset Psycho Kruiser VE (w/KT-331P) Kyosho 1/8 EP 4WD Readyset Psycho Kruiser VE (w/KT-331P)
$1,049.99
In stock

The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 1500Kv NEON 7 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-331P transmitter and ultra high-torque KS-203 steering servo system pre-installed. 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!



・3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.

・Fully factory assembled Readyset.

・Pre-cut 4 color printed body.

・Pre-installed 1500Kv Team Orion NEON 7 brushless motor. (drip proof)

・2.4GHz R/C system with Syncro KT-331P transmitter requires no frequency band control.

・Includes waterproof ultra high torque KS-203 steering servo.

・Incorporates many reinforced parts such as hardened main chassis.

・Features machined aluminum dial adjustable big bore shocks.

・Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke black chrome wheels & block tires. Balances rough road running power with high level grip performance.

・Stabilizers and universal joints are equipped on front and rear.

・Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.

・Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.

・Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.

・Large bumper provides protection for the front suspension holders and lower arm plate.

・Compatible with many optional parts for the Inferno series.


Technical Specs

■Length 550mm

■Width 427mm

■Height 230mm

■Wheelbase 355mm

■Tread (F/R) 289mm / 289mm

■Tire(F/R) 148 x 66mm / 148 x 66mm

■Gear Ratio 12.375:1

■Weight 4,650g (approx.)

■Motor 1500Kv Team Orion Neon 7 brushless motor


REQUIRED FOR OPERATION

●Battery / LiPo 2-3cell x 2 pack (with Super (Deans) plug)/use series connected. ●Recommended: LiPo 4300 x 2

●LiPo compatible charger

●4 x AA alkaline batteries for transmitter

Kyosho 1/8 EP4INF RSET Inferno MP9E TKI Brless Buggy w/2.4GHz Kyosho 1/8 EP4INF RSET Inferno MP9E TKI Brless Buggy w/2.4GHz
$849.99
Temporarily Out of Stock

MP9e TKI that swept the world launches as a Readyset!

Packed with performance to dominate any off-road circuit!

The world-beating performance of Inferno MP9 TKI is now available in electric power with the launch of the MP9e TKI Readyset. Simply switch ON and feel the power surge with instant acceleration to full speed. With precision control and handling, the MP9e marks a new era in electric buggy performance that is ready to take on any type of course. The TKI (Team Kyosho International) brand marks this MP9e as a fully equipped race spec version with the Inferno’s superior racing performance and wide scope for setting options. Expert racers to beginners can enjoy breathtaking performance on any off-road circuit with this fully pre-assembled Readyset packaged with the 2.4GHz large LCD screen KT-201 transmitter and fast response/high torque KS-401 servo installed. Combined with the powerful Team Orion NEON8 brushless motor, anyone can experience and enjoy the very best electric off-road performance.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Ground Clearance 28mm

■Wheelbase 325mm (change rear hub collar positions - 4 settings)

■Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

■Tire(F/R) 116 x 44mm (F/R)

■Gear Ratio 12.6:1

■Weight 3,370g approx.

■Motor Team Orion NEON8 Brushless

■Battery 7.2V NiMH x 2 (recommended : Sports Power 4500/with super plug)

■Battery Note Super (Deans) plug only


REQUIRED FOR OPERATION

●7.4V LiPO battery x 2 (recommended:Peak Powermax 4200) both Super Plug specification

●Battery charger (recommended / Team ORION ORI30126)

●4 x AA alkaline batteries for transmitter

Kyosho 1/8 GP 4WD Kit Inferno MP9 Spec A-10th Kyosho 1/8 GP 4WD Kit Inferno MP9 Spec A-10th
$1,249.00
In stock

Special model to commemorate the 10-year anniversary of the MP9 Series,

semi-assembled so the kit can be completed and race-ready on the same day!


With its unrivaled record of 8 World Championship titles, each generation of the Inferno sets the 1/8 Engine Buggy performance standard against which all others are measured. Released in October 2008, the MP9 cemented the Inferno legend with victory at the 12th IFMAR World Championship held in Thailand in 2010 in addition to a 6th Japan National title. To commemorate the 10th anniversary, the latest MP9 TKI4 model has been equipped with a performance boosting selection of optional parts in a semi-assembled chassis kit to create the Inferno MP9 TKI4 10th Anniversary Special Edition Spec A. Key components such as the Big Bore Shocks and gear diff have been assembled by expert Inferno staff and each machine is personally checked by the Inferno’s designer, Yuichi Kanai. Just install the RC system and engine and you will be ready for action with one of the most advanced off-road racing machines ever built.


Installation of R/C system such as receiver and servos and connection of linkages

Painting of body and attachment of decals

(Body is pre-cut but requires opening of sections to suit your choice of engine head and exhaust).

Tires and inners are required to be purchased separately and glued to wheels.

Installation of engine, clutch, manifold and muffler. Assembly and installation of piping, linkages and air cleaner.

Wing assembly and installation.


Technical Data

Length 490mm

Width 307mm

Height 180mm

Ground Clearance 28mm

Wheelbase 325mm (4 settings / by changing rear hub collar position)

Tread (F/R) 254mm (rear 3, front 2 settings / by replacing bushes)

Tires (F/R) sold separately

Gear Ratio 11.96 :1

Weight 2,950g approx.

Engine 21 class (sold separately)


Kit Contents

MP9 TKI4 pre-assembled chassis kit

Special wheels

Pre-cut clear body

Wing

Fuel tube

Linkage parts

Clutch parts

Logo decals

Manual


Required for Operation

2ch, 2 servo R/C system for cars

21 class engine

Muffler & manifold

Tires & inners for 1/8 buggy

Fuel

Fuel bottle

Plug heater

Starter box

Batteries for R/C system

Oil for air cleaner (No.96176 HG air cleaner oil is recommended)

Paint for body

Kyosho 1/8 GP 4WD r/s INFERNO NEO 3.0 T1 Blue Kyosho 1/8 GP 4WD r/s INFERNO NEO 3.0 T1 Blue
$539.00
Out of stock

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!


●Factory assembled Readyset includes everything except fuel, batteries for transmitter and receiver, starting tools.

●Equipped with four-wheel double wishbone suspension.

●Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.

●Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.

●Double disc brakes provide the stopping power needed for a large racing machine.

●Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Kyosho 1/8 GP 4WD r/s INFERNO NEO 3.0 T2 Red Kyosho 1/8 GP 4WD r/s INFERNO NEO 3.0 T2 Red
$539.00
Out of stock

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!


●Factory assembled Readyset includes everything except fuel, batteries for transmitter and receiver, starting tools.

●Equipped with four-wheel double wishbone suspension.

●Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.

●Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.

●Double disc brakes provide the stopping power needed for a large racing machine.

●Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Losu 8ight-E 1/8 Electric Off-Road RTR Buggy Losu 8ight-E 1/8 Electric Off-Road RTR Buggy
$849.99
Temporarily Out of Stock

Losu 8ight-E 1/8 Electric Off-Road RTR Buggy


When it comes to buggy racing, the TLR® 8IGHT™ platform reigns supreme. The 8IGHT-E™ lives up to its heritage and will not disappoint, whether you're racing on the track or street. Upgrade with TLR parts to reach speeds of 50+ mph.

At a Glance


Needed to Complete

4S 15.2V 5000mAh 50C LiPo Battery with EC5™ connector

Compatible Charger


What's in the box?

(1) Losi 1/8 8IGHT-E 4WD Buggy RTR

(1) Spektrum DX2E 2.4GHz Transmitter

(1) Spektrum SR310 3-Channel DSMR® Receiver

(1) Dynamite Fuze™ 130A Brushless Waterproof ESC

(1) Dynamite Fuze 1/8 Scale Brushless Sensorless Motor, 2500Kv

(1) 9KG Servo, Waterproof, 23T

(4) AA Batteries (for transmitter)

(1) Wheel Wrench

(1) 0.050-inch Hex "L" Wrench

(1) 1/16-inch Hex "L" Wrench

(1) 5/64-inch Hex "L" Wrench

(1) 3/32-inch Hex "L" Wrench

(1) Shock Bottom Wrench

(1) Turnbuckle/Shock Top Wrench

(1) User Manual


Overview

If you are serious about competitive buggy racing, this is the place to start. The next generation 8IGHT is here, and it has arrived with a vengeance. The Losi® 8IGHT-E™ buggy will put you on the podium right out of the box. The 8IGHT platform has a greater history of winning than any other. This version is completely upgradeable with select TLR® option parts and features an improved ESC that can handle up to 4S power, as well as a 2500Kv motor than can reach speeds of 50+ mph. What are you waiting for? Make the switch to electric 1/8-scale racing and start dominating the track.


Incredible Speed

The 8IGHT-E can hit 50+ mph (80 kph) on 4S power.


Dynamite® Power System

The powerful Dynamite 130A ESC can handle up to 4S LiPo batteries. The 2500Kv motor will propel the 8IGHT-E to speeds in excess of 50+ mph on 4S power.


Ready to Run

The 8IGHT-E is ready-to-run with everything but a battery and charger. You choose the power system you want.


Impressive Durability

This buggy features a 4mm chassis made out of 6061 aluminum and is black anodized for added strength. All other components are made from materials similar to the TLR version for enhanced durability.


Spektrum™ 9KG waterproof* metal gear servo

The Spektrum 9KG waterproof metal gear servo provides strong, reliable steering and lets you run anytime, rain or shine.


Spektrum DX2E Transmitter

The Spektrum DX2E transmitter provides the precision you need to dominate the track. RC enthusiasts around the world trust its proven performance, reliability and range.


Metal Gear Differentials

With a three differential drive system, the 8IGHT-E can easily accelerate through bumpy track conditions.


High-Performance Body

Featuring features a race-inspired TLR cab forward body, the 8IGHT-E looks just as good as it performs.


*For complete details on waterproof standards, refer to the product instruction manual.


Features


Incredible speed

Dynamite® power system

Ready to run

Impressive durability

Spektrum™ 9KG waterproof metal gear servo

Spektrum DX2E transmitter

Metal gear differentials

High-performance body

Product Specifications


Type:Buggy

Scale:1/8

Length:19.6 in (497mm)

Width:12.1 in (308mm)

Height:7.1 in (180mm)

Ground Clearance:2.4 in (60mm)

Wheelbase:12.7 - 12.9 in (323-327mm)

Weight:6.8 lb (3.1kg)

Chassis:4mm Plate 6061-T6 Aluminum

Suspension:Independent

Drivetrain:4WD All-Metal Shaft Driven

Tire Type:Medium XBT

Motor or Engine:Non-Sensored Brushless 2500Kv

Speed Control:Included

Radio:DX2E

Servos:Included

Gear Pitch:Mod 1

Wheel Size:Diameter: 3.3 in (83.5mm), Width: 1.7 in (42mm)

Kit/RTR:RTR

Shock Type:15mm Bore Threaded Composite

Body:4.0 Cab Forward

Ball Bearings:Full Drivetrain Precision Ball Bearings

Recommended Environment:Outdoor

LRP S8 Rebel BXE 2.4Ghz RTR Limited Edition LRP S8 Rebel BXE 2.4Ghz RTR Limited Edition
$599.00
Out of stock

Description

S8 REBEL BXE 2.4GHZ RTR LIMITED EDITION - 1/8 ELECTRIC BUGGY 2.4GHZ RTR

Based on the chassis of the S8 Rebel BX nitro buggy, LRP designed an uncompromising electric buggy. Its price-performance-ratio is outstanding. This beginner-friendly RTR set is equipped with a real power package.  
    
The drivetrain has to withstand the enormous power of LRP’s latest competition technology for 1/8 offroad racing – LRP Dynamic 8 2200kv and LRP iX8 V2 Brushless speedo. Components like the powerful 13kg steering servo with metal gears, big bore shocks and aluminium steering knuckles have been taken over from the nitro version. The S8 Rebel BXe is the first choice for every electric offroad driver! 

 

FEATURES

  • 1/8 Electric 4WD R/C Offroad RTR Buggy
  • Completely built with ball bearings
  • Bullet Proof 4mm front and rear aluminium tuning shock towers, blue anodized
  • Stylish 7-spoke wheels
  • High-quality LRP 13kg steering servo ballraced with metal gears
  • Competition inspired design with maximum durability and low maintenance for everyday use
  • Extra strong aluminium front suspension arm brace
  • Funky airbrush body design, pre-decaled, competition Buggy „cab-forward“ body shell
  • Extra robust, fully adjustable servosaver
  • Heavy-duty 3mm anodized aluminium chassis with countersunk screws on the chassis
  • VTEC Kamikaze racing tyres for maximum traction
  • Low maintenance and efficient universal drivetrain with 3 pieces 4-spider differentials and extra hardened differential outdrives
  • Completely built and ready-to-run Offroad car
  • LRP race-proven 1/8 brushless combo LRP iX8 V2 speed control and LRP Dynamic 8 2200kv brushless power
  • Blue anodized, 2-piece CNC motor mount
  • Full aluminium LRP Factory Team tested big bore shocks with heavy-duty shock shafts
  • Fully adjustable race suspension with R/L turnbuckles
  • Adjustable battery tray to fit all standard battery sizes
  • Front CVD drive shafts
  • Special cable tunnel for the receiver wire offering maximum protection
  • Aluminium left and right steering knuckles
  • Easy to understand user manual including setup and beginner guide

TECHNICAL DATA

 
Width306mm
 
Length504mm
 
Height195mm
 
Wheelbase331mm

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.


Description

Styled to turn heads, from the local bashing spot to the club race track, the TYPHON 6S looks serious, straight from the box.

Unleashing the equipped BLX brushless system will allow you to master 6S LiPo battery power on a wide range of extreme surfaces. The TYPHON 6S is ready for action.

A low-profile Polycarbonate body shell, and race-inspired multi-spoke black nylon wheels, are combined with a high-downforce rear wing for refined performance in the most extreme driving environments.

With track-inspired handling and super-tough bashing build quality, your TYPHON 6S will put you in control of exhilarating RC driving action, straight from the box. Rip up your local dirt bowl, blast across the mall parking lot, launch huge jumps at the skate park. The TYPHON 6S can do it all.

Big bore red anodized aluminum shocks provide a plush driving experience, even on the roughest terrains.

Triple diff equipped and ready to command the roughest environments, from the first time you pull the trigger, you will understand what BLX brushless power is designed to do. More power, more speed, more excitement. You control how it happens.

Fully loaded with premium waterproof electronics, the TYPHON 6S is ready to challenge high-speed parking lot runs, then blast through the mud, dirt, water and snow at your local bashing spot.

The TYPHON 6S is built around a black anodized aluminum chassis plate, giving this BLX brushless powered bashing machine a strong and durable platform for ultimate performance.

Black anodized front and rear shock towers provide reduced weight and increased durability, the perfect combination when you unleash the 6S LiPo capability of this super-tough 1/8 4WD electric speed buggy.

Equipped with triple oil-filled diff units, front, middle and rear, hammering the throttle and getting the power down in all conditions is effortless and consistent. All metal diff gears provide long-lasting durability and soak up the punishment as you bash hard.

Standing out from the crowd is easy when you pilot the TYPHON 6S. A super-detailed and pre-painted body shell provides increased protection against the elements. Steel driveshafts and super-durable composite suspension arms and hubs make your journey into wild locations even easier.

A pillow ball suspension set-up keeps the TYPHON 6S handling super-smooth, no matter what you throw at it.

A strengthened rear wing mount provides added durability, meaning you can hit the biggest jumps and fly like a bashing Pro, time after time. The included steel anti-roll bars allow the TYPHON 6S to handle like a premium race vehicle, whilst providing an advanced tuning option as your experience grows.

Equipped with an adjustable battery tray, your chosen battery cell position can be adjusted, changing the weight balance of the TYPHON 6S for specific driving styles. Secured with super-strong hook and loop straps, hassle-free battery cell changes are performed in seconds.

Ultra-strong composite chassis side pods provide increased protection from dirt and water ingress when the bashing action gets extreme.

Aggressive and hard-wearing dBoots all-terrain tires are mounted on strong black nylon wheels, giving you the traction you need to put the BLX brushless power straight into your chosen surface. 17mm wheel hex fittings allow the use of a wide range of third party wheel and tire combinations, meaning you can switch your rubber if you choose to go and hit the local race track.

The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.

Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.

The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.

Recommended battery specification: 5000mAh - 35C minimum - Per battery pack

The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with our BLX185 ESC unit.

A beautifully etched black aluminum motor can provides a premium look, whilst a 4 pole internal configuration keeps the power supply smooth and consistent.

Gold bullet connectors provide fast and easy wire removal when you need to clean down your vehicle.

The aluminum motor can provides increased heat dissipation from the finned body section.

A dual motor shaft flat section provides a safe and secure pinion gear fitting.

The TTX300 radio system will provide fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.

Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.

Axial 1/8 Yeti XL 4WD Monster Buggy RTR

Description

The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that its fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price! Fully assembled right out of the box and fitted with a no-hassle HPI 2.4GHz radio system, the Trophy Buggy Flux is ready for you to drop in two 2S LiPo batteries for 14.4 volts of ground-crushing fun! Go brushless with the Trophy Buggy Flux!

2.4GHz RADIO SYSTEM

Ready-built right out of the box and fitted with an all-new 2.4GHz radio system, the Trophy Buggy Flux is the perfect introduction to serious 1/8th off-road buggies! No need to worry about changing crystals, the radio prevents frequency conflicts automatically. If the car ever loses radio signal or battery power, an electronic failsafe will bring it to a safe and controlled stop. You get big-air fun and race-track performance in one easy RTR package!.

If youre looking for a powerful, versatile and FAST brushless system, you dont have to look any further than the combination of the HPI Flux Scream motor and Flux Rage speed controller! The Flux Scream motor is the perfect match for the Rage speedo: with 1965KV of power, it was designed from the ground up to be bolted into 1/8th scale off-road vehicles to give you the explosion of power you want from any car or truck! The Flux Rage is a monster of a speedo: able to handletwin 2S batteries for up to 4S (14.4 volt!) power, you will experience mind-bending top speeds and blindingly fast acceleration for huge stunts, massive jumps and burly maneuvers that will make your jaw drop! Also, if you ever want to change your speedo settings, youll be able to experiment easily with the 101280 2 in 1 Professional Program Card! You can change the amount of braking the speedo uses on the motor, reversing speed, motor timing and even the motor for accelerating smoothly in different traction conditions!

The chassis of the Trophy Buggy Flux is based on the nitro version of the Trophy Buggy, so its ready for anything you can throw at it. The aluminium construction provides the perfect foundation with its combination of low weight and high strength, and the smart design and layout of the components make working on the car fast and easy!

  • 4mm 6061 aluminium chassis has angled sides for extra stiffness
  • Fits two hard-case 2S LiPo batteries with adjustable battery holders and hook & loop straps
  • Low-profile aluminium radio tray securely mounts servos
  • Tough front bumper protects against crash damage
  • Enclosed radio box protects battery and receiver from the elements
  • Low centre of gravity design for top handling in the turns
  • Adjustable mounts for the wide racing wing

Description

BREAK THE SPEED LIMIT AND MAKE HUGE, RECORD-SETTING JUMPS 

With the World Championship-winning HB D8 buggy as its foundation, the Vorza takes the race-winning design of the D8 and mixes it up with HPI Flux HP tech from the Savage Flux HP to give you awe-inspiring speed! This is a ready to run (RTR) buggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any buggy track for top-level racing action - it will turn heads and amaze your friends! The Vorza has everything that backyard bashers and racers want! The Vorza Flux HP is our FASTEST buggy, able to reach speeds over 60 mph*! Can you imagine an electric buggy going that fast? The Flux ELC-6S speed controller takes 2 batteries, allowing you to fit in up to 6S of LiPo power for utterly insane top speeds and mind-boggling take-off power!

The RTR Vorza Flux HP chassis features a wide range of excellent features, making it suitable for serious bashing AND racing! An esteemed race-winning heritage, amazingly powerful motor and speed controller combination and stupendous raw speed and power are just the beginnings of the Vorza Flux HP story! With many parts taken directly from the World Champion HB D8 racing buggy, the Vorza is ready to hit the track any time, any place! With World Champion DNA from the HB D8, you get complete adjustability in the suspension and even a tunable drivetrain, if you want to experiment to tune your Vorza Flux HP for fast lap times. 

Loaded with high-strength standard parts, World Championship-winning reliability and toughness and a monstrous amount of power and speed, the Vorza Flux HP is the ideal high speed, big air buggyfor serious bashers! 

Supercharged MP9e version is the choice of the world's top drivers!

TKI specification is packed with special performance parts!

With interest first sparked in Europe and America, 1/8 electric buggy racing has now emerged as a supercharged racing category around world. Electric versions of the world dominating GP Inferno MP9 have been optimized for electric power and the introduction of the MP9e has built a following amongst the world's top drivers with its racing power and speed. A new TKI version extends this competitive advantage to an even higher level. Featuring the most advanced components available, the MP9e TKI is fully equipped to win and worthy of Kyosho's international factory team (TKI) brand. With improvements to the Inferno's renowned strength and durability, precision components add even more racing speed that can be fine tuned with a wider scope for custom settings. Aiming to be the best in its class, the Inferno MP9e TKI is your road to glory in 1/8 EP buggy racing!


Technical Specs

Length 490mm

Width 307mm

Height 180mm

Ground Clearance 28mm

Wheelbase 325mm (change rear hub collar positions - 4 settings)

Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

Tire(F/R) Sold separately

Gear Ratio 12.6:1

Weight 3,500g (with 5000 Lipo)


REQUIRED FOR OPERATION

2-channel, 1-servo R/C system

Brushless motor

ESC for brushless motor

Two Li-Po batteries for chassis

Battery charger

Tires

Wheels

Tire inners

Shock oil

Paint for body

Battery for R/C system

[CAUTION] model will function Ni-MH and Ni-Cd batteries but may not deliver performance as designed.

Enjoy the thrill of pure buggy racing with the increased speed and performance of the 1/8 scale electric Inferno MP9 TKI4!

With an impressive TQ in qualifying and a 2nd finish at the IFMAR 1/8 scale engine off road world championship in Las Vegas in October 2016, the INFERNO MP9 TKI4 demonstrated to everyone just how fast it really is. With its formidable controlled speed, the electric powered MP9e TKI4 inherits the INFERNO’s flat controllability, superior airborne posture and great agility through optimal mass concentration and lower center of gravity. Shared components from the new MP9 TKI4 design such as longer front sus arms, front sus holder, front shock stay, rear wing and wing stay also realize increased compatibility on low through to high grip surfaces to meet the individual demands of each driver. This design update not only delivers improved running performance but also the essential elements for racing victory in the form of a complete revision for improved maintenance efficiency and higher durability. Designed and built with a sole focus on racing to win, the pure racing specifications of the MP9e TKI4 will put you on the road to glory!


●Minor change model incorporates parts from the INFERNO MP9 TK14.

●4WD with 3-diff shaft drive and 4-wheel independent double wishbone suspension contributes to low C of G.

●Aluminum knuckles optimize akerman for smoother cornering.

●Thicker ball end on the steering tie rod increases durability.

●Revised design of mounting pin for the oil shock arm allows more secure installation and improves durability.

●Revised design of catch prevents damage to the shock boots.

●Features heavy-duty universal shafts on front & rear drive shafts and center shaft.

●Dirt guards on rear sus arm protect the drive system.

●Equipped with popular forward cabin type body.

●Full ball bearing specifications.

●Compatible with a wide range of INFERNO MP9 TKI4 optional parts.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Wheelbase 325mm (Wheelbase can be adjusted by changing the rear hub collars.)

■Tread (F/R) 254mm

■Tire(F/R) sold separately

■Gear Ratio 12.7:1

■Weight 3,370g approx.


REQUIRED FOR OPERATION

2ch 1 servo R/C system

Batteries for R/C system

Brushless motor

ESC for brushless motor

2 batteries for chassis

Battery charger

Tires

Wheels

Tire inners

Tools

Instant glue

Silicon oil for shocks

Paint for coloring body

Experience 8-time World Championship winning performance in electric power!

Readyset makes it easy for everyone to enjoy world-class performance!

The world-beating performance of Inferno MP9 TKI is now available in electric power with the launch of the MP9e TKI Readyset. Simply switch ON and feel the power surge with instant acceleration to full speed. With precision control and handling, the MP9e marks a new era in electric buggy performance that is ready to take on any type of course. The TKI (Team Kyosho International) brand marks this MP9e as a fully equipped race spec version with the Inferno’s superior racing performance and wide scope for setting options. Expert racers to beginners can enjoy breathtaking performance on any off-road circuit with this fully pre-assembled Readyset packaged with the 2.4GHz large LCD screen KT-331P transmitter and fast response/high torque KS-5031-09MW servo installed. Combined with the powerful Team Orion NEON8 brushless motor, anyone can experience and enjoy the very best electric off-road performance.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Ground Clearance 28mm

■Wheelbase 325mm (change rear hub collar positions - 4 settings)

■Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

■Tire(F/R) 116 x 44mm (F/R)

■Gear Ratio 12.6:1

■Weight 3,370g approx.

■Motor Team Orion NEON8 Brushless

■Battery 7.2V NiMH x 2 (recommended : Sports Power 4500/with super plug)

■Battery Note Super (Deans) plug only


REQUIRED FOR OPERATION

●7.4V LiPO battery x 2 (recommended:Peak Powermax 4200) both Super Plug specification

●Battery charger (recommended / Team ORION ORI30126)

●4 x AA alkaline batteries for transmitter

The brutal power of this machine is meant for expert hands only!

Top-level drivers proclaim this as the most extreme power in an R/C model ever experienced! This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 1500Kv NEON 7 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h. If you are not in full control of the throttle, it can back flip and leave onlookers completely lost for words. This formidable power is harnessed with a high-rigidity bulkhead, hardened chassis, reinforced transmission and diff ring gears, dial adjustable large capacity oil shocks and shock resistant battery case. This feature packed machine comes as a fully assembled Readyset package and requires no frequency band setting with the 2.4GHz Syncro KT-331P transmitter and ultra high-torque KS-203 steering servo system pre-installed. 4-color printed body is included so you only need to add your own charged LiPo battery and batteries to the transmitter for the mayhem to start. We would like to say this model is for everyone, but such is the power of this machine only expert level drivers can have some degree of confidence in managing its extreme performance. There has never been a monster truck like this one, and maybe there never will be!



・3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.

・Fully factory assembled Readyset.

・Pre-cut 4 color printed body.

・Pre-installed 1500Kv Team Orion NEON 7 brushless motor. (drip proof)

・2.4GHz R/C system with Syncro KT-331P transmitter requires no frequency band control.

・Includes waterproof ultra high torque KS-203 steering servo.

・Incorporates many reinforced parts such as hardened main chassis.

・Features machined aluminum dial adjustable big bore shocks.

・Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine’s extreme level of power.Equipped with 6-spoke black chrome wheels & block tires. Balances rough road running power with high level grip performance.

・Stabilizers and universal joints are equipped on front and rear.

・Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.

・Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.

・Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.

・Large bumper provides protection for the front suspension holders and lower arm plate.

・Compatible with many optional parts for the Inferno series.


Technical Specs

■Length 550mm

■Width 427mm

■Height 230mm

■Wheelbase 355mm

■Tread (F/R) 289mm / 289mm

■Tire(F/R) 148 x 66mm / 148 x 66mm

■Gear Ratio 12.375:1

■Weight 4,650g (approx.)

■Motor 1500Kv Team Orion Neon 7 brushless motor


REQUIRED FOR OPERATION

●Battery / LiPo 2-3cell x 2 pack (with Super (Deans) plug)/use series connected. ●Recommended: LiPo 4300 x 2

●LiPo compatible charger

●4 x AA alkaline batteries for transmitter

MP9e TKI that swept the world launches as a Readyset!

Packed with performance to dominate any off-road circuit!

The world-beating performance of Inferno MP9 TKI is now available in electric power with the launch of the MP9e TKI Readyset. Simply switch ON and feel the power surge with instant acceleration to full speed. With precision control and handling, the MP9e marks a new era in electric buggy performance that is ready to take on any type of course. The TKI (Team Kyosho International) brand marks this MP9e as a fully equipped race spec version with the Inferno’s superior racing performance and wide scope for setting options. Expert racers to beginners can enjoy breathtaking performance on any off-road circuit with this fully pre-assembled Readyset packaged with the 2.4GHz large LCD screen KT-201 transmitter and fast response/high torque KS-401 servo installed. Combined with the powerful Team Orion NEON8 brushless motor, anyone can experience and enjoy the very best electric off-road performance.


Technical Specs

■Length 490mm

■Width 307mm

■Height 180mm

■Ground Clearance 28mm

■Wheelbase 325mm (change rear hub collar positions - 4 settings)

■Tread (F/R) 254mm (replace bushings - 3 rear, 2 front settings)

■Tire(F/R) 116 x 44mm (F/R)

■Gear Ratio 12.6:1

■Weight 3,370g approx.

■Motor Team Orion NEON8 Brushless

■Battery 7.2V NiMH x 2 (recommended : Sports Power 4500/with super plug)

■Battery Note Super (Deans) plug only


REQUIRED FOR OPERATION

●7.4V LiPO battery x 2 (recommended:Peak Powermax 4200) both Super Plug specification

●Battery charger (recommended / Team ORION ORI30126)

●4 x AA alkaline batteries for transmitter

Special model to commemorate the 10-year anniversary of the MP9 Series,

semi-assembled so the kit can be completed and race-ready on the same day!


With its unrivaled record of 8 World Championship titles, each generation of the Inferno sets the 1/8 Engine Buggy performance standard against which all others are measured. Released in October 2008, the MP9 cemented the Inferno legend with victory at the 12th IFMAR World Championship held in Thailand in 2010 in addition to a 6th Japan National title. To commemorate the 10th anniversary, the latest MP9 TKI4 model has been equipped with a performance boosting selection of optional parts in a semi-assembled chassis kit to create the Inferno MP9 TKI4 10th Anniversary Special Edition Spec A. Key components such as the Big Bore Shocks and gear diff have been assembled by expert Inferno staff and each machine is personally checked by the Inferno’s designer, Yuichi Kanai. Just install the RC system and engine and you will be ready for action with one of the most advanced off-road racing machines ever built.


Installation of R/C system such as receiver and servos and connection of linkages

Painting of body and attachment of decals

(Body is pre-cut but requires opening of sections to suit your choice of engine head and exhaust).

Tires and inners are required to be purchased separately and glued to wheels.

Installation of engine, clutch, manifold and muffler. Assembly and installation of piping, linkages and air cleaner.

Wing assembly and installation.


Technical Data

Length 490mm

Width 307mm

Height 180mm

Ground Clearance 28mm

Wheelbase 325mm (4 settings / by changing rear hub collar position)

Tread (F/R) 254mm (rear 3, front 2 settings / by replacing bushes)

Tires (F/R) sold separately

Gear Ratio 11.96 :1

Weight 2,950g approx.

Engine 21 class (sold separately)


Kit Contents

MP9 TKI4 pre-assembled chassis kit

Special wheels

Pre-cut clear body

Wing

Fuel tube

Linkage parts

Clutch parts

Logo decals

Manual


Required for Operation

2ch, 2 servo R/C system for cars

21 class engine

Muffler & manifold

Tires & inners for 1/8 buggy

Fuel

Fuel bottle

Plug heater

Starter box

Batteries for R/C system

Oil for air cleaner (No.96176 HG air cleaner oil is recommended)

Paint for body

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!


●Factory assembled Readyset includes everything except fuel, batteries for transmitter and receiver, starting tools.

●Equipped with four-wheel double wishbone suspension.

●Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.

●Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.

●Double disc brakes provide the stopping power needed for a large racing machine.

●Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

With 8 World Championship titles, the ‘Inferno’ is proud to be KYOSHO’s flagship model. Infused with Inferno DNA, the Inferno NEO 3.0 is ready to race almost as soon as it’s out of the box and brings the Inferno’s glorious performance potential within reach of everyone. While excelling on racing circuits, the NEO 3.0 also runs through rough terrain like a boss with features such as the user-friendly KE21SP engine with recoil pull starter and Big Bore Shocks with the omnipotent KC Cross Tires that deliver an optimal balance of performance and running stability on any surface. Based on the competition-level chassis, the NEO 3.0 promises exceptional reliability and durability plus wide scope for setting adjustments and custom performance upgrades through the huge range of optional parts available for the MP7.5 series. Experiencing the thrill of engine-powered off-road buggy racing has been made easy with the Inferno NEO 3.0!


●Factory assembled Readyset includes everything except fuel, batteries for transmitter and receiver, starting tools.

●Equipped with four-wheel double wishbone suspension.

●Universal swing shafts are standard on the front drive section and minimize drive loss and improve crash resistance.

●Gear diffs on center, front and rear ensure optimal driving force is transferred to all four wheels.

●Double disc brakes provide the stopping power needed for a large racing machine.

●Sealed mechanical box protects the battery and receiver from crashes, sand and dust.

Losu 8ight-E 1/8 Electric Off-Road RTR Buggy


When it comes to buggy racing, the TLR® 8IGHT™ platform reigns supreme. The 8IGHT-E™ lives up to its heritage and will not disappoint, whether you're racing on the track or street. Upgrade with TLR parts to reach speeds of 50+ mph.

At a Glance


Needed to Complete

4S 15.2V 5000mAh 50C LiPo Battery with EC5™ connector

Compatible Charger


What's in the box?

(1) Losi 1/8 8IGHT-E 4WD Buggy RTR

(1) Spektrum DX2E 2.4GHz Transmitter

(1) Spektrum SR310 3-Channel DSMR® Receiver

(1) Dynamite Fuze™ 130A Brushless Waterproof ESC

(1) Dynamite Fuze 1/8 Scale Brushless Sensorless Motor, 2500Kv

(1) 9KG Servo, Waterproof, 23T

(4) AA Batteries (for transmitter)

(1) Wheel Wrench

(1) 0.050-inch Hex "L" Wrench

(1) 1/16-inch Hex "L" Wrench

(1) 5/64-inch Hex "L" Wrench

(1) 3/32-inch Hex "L" Wrench

(1) Shock Bottom Wrench

(1) Turnbuckle/Shock Top Wrench

(1) User Manual


Overview

If you are serious about competitive buggy racing, this is the place to start. The next generation 8IGHT is here, and it has arrived with a vengeance. The Losi® 8IGHT-E™ buggy will put you on the podium right out of the box. The 8IGHT platform has a greater history of winning than any other. This version is completely upgradeable with select TLR® option parts and features an improved ESC that can handle up to 4S power, as well as a 2500Kv motor than can reach speeds of 50+ mph. What are you waiting for? Make the switch to electric 1/8-scale racing and start dominating the track.


Incredible Speed

The 8IGHT-E can hit 50+ mph (80 kph) on 4S power.


Dynamite® Power System

The powerful Dynamite 130A ESC can handle up to 4S LiPo batteries. The 2500Kv motor will propel the 8IGHT-E to speeds in excess of 50+ mph on 4S power.


Ready to Run

The 8IGHT-E is ready-to-run with everything but a battery and charger. You choose the power system you want.


Impressive Durability

This buggy features a 4mm chassis made out of 6061 aluminum and is black anodized for added strength. All other components are made from materials similar to the TLR version for enhanced durability.


Spektrum™ 9KG waterproof* metal gear servo

The Spektrum 9KG waterproof metal gear servo provides strong, reliable steering and lets you run anytime, rain or shine.


Spektrum DX2E Transmitter

The Spektrum DX2E transmitter provides the precision you need to dominate the track. RC enthusiasts around the world trust its proven performance, reliability and range.


Metal Gear Differentials

With a three differential drive system, the 8IGHT-E can easily accelerate through bumpy track conditions.


High-Performance Body

Featuring features a race-inspired TLR cab forward body, the 8IGHT-E looks just as good as it performs.


*For complete details on waterproof standards, refer to the product instruction manual.


Features


Incredible speed

Dynamite® power system

Ready to run

Impressive durability

Spektrum™ 9KG waterproof metal gear servo

Spektrum DX2E transmitter

Metal gear differentials

High-performance body

Product Specifications


Type:Buggy

Scale:1/8

Length:19.6 in (497mm)

Width:12.1 in (308mm)

Height:7.1 in (180mm)

Ground Clearance:2.4 in (60mm)

Wheelbase:12.7 - 12.9 in (323-327mm)

Weight:6.8 lb (3.1kg)

Chassis:4mm Plate 6061-T6 Aluminum

Suspension:Independent

Drivetrain:4WD All-Metal Shaft Driven

Tire Type:Medium XBT

Motor or Engine:Non-Sensored Brushless 2500Kv

Speed Control:Included

Radio:DX2E

Servos:Included

Gear Pitch:Mod 1

Wheel Size:Diameter: 3.3 in (83.5mm), Width: 1.7 in (42mm)

Kit/RTR:RTR

Shock Type:15mm Bore Threaded Composite

Body:4.0 Cab Forward

Ball Bearings:Full Drivetrain Precision Ball Bearings

Recommended Environment:Outdoor

Description

S8 REBEL BXE 2.4GHZ RTR LIMITED EDITION - 1/8 ELECTRIC BUGGY 2.4GHZ RTR

Based on the chassis of the S8 Rebel BX nitro buggy, LRP designed an uncompromising electric buggy. Its price-performance-ratio is outstanding. This beginner-friendly RTR set is equipped with a real power package.  
    
The drivetrain has to withstand the enormous power of LRP’s latest competition technology for 1/8 offroad racing – LRP Dynamic 8 2200kv and LRP iX8 V2 Brushless speedo. Components like the powerful 13kg steering servo with metal gears, big bore shocks and aluminium steering knuckles have been taken over from the nitro version. The S8 Rebel BXe is the first choice for every electric offroad driver! 

 

FEATURES

  • 1/8 Electric 4WD R/C Offroad RTR Buggy
  • Completely built with ball bearings
  • Bullet Proof 4mm front and rear aluminium tuning shock towers, blue anodized
  • Stylish 7-spoke wheels
  • High-quality LRP 13kg steering servo ballraced with metal gears
  • Competition inspired design with maximum durability and low maintenance for everyday use
  • Extra strong aluminium front suspension arm brace
  • Funky airbrush body design, pre-decaled, competition Buggy „cab-forward“ body shell
  • Extra robust, fully adjustable servosaver
  • Heavy-duty 3mm anodized aluminium chassis with countersunk screws on the chassis
  • VTEC Kamikaze racing tyres for maximum traction
  • Low maintenance and efficient universal drivetrain with 3 pieces 4-spider differentials and extra hardened differential outdrives
  • Completely built and ready-to-run Offroad car
  • LRP race-proven 1/8 brushless combo LRP iX8 V2 speed control and LRP Dynamic 8 2200kv brushless power
  • Blue anodized, 2-piece CNC motor mount
  • Full aluminium LRP Factory Team tested big bore shocks with heavy-duty shock shafts
  • Fully adjustable race suspension with R/L turnbuckles
  • Adjustable battery tray to fit all standard battery sizes
  • Front CVD drive shafts
  • Special cable tunnel for the receiver wire offering maximum protection
  • Aluminium left and right steering knuckles
  • Easy to understand user manual including setup and beginner guide

TECHNICAL DATA

 
Width306mm
 
Length504mm
 
Height195mm
 
Wheelbase331mm