Description: GT-SD4 Balance charger (240V)
Circut power: Max 20W
Charge current: 0.5/1/1.5/2/2.5/3A
Supports: Lipo/LiFe/LiHv 2-4s
NiMH/NiCd 4-8 cells
Lead supplied: Deans charge lead
Description: GT-N802 AC (240V) charger
Charge current: 2A
Circut power: Max 20w
Supports: NiMh and NiCd 4-8 cells
Lead: Hard wired with Tamiya plug.
This USB charger is designed for the Carisma GT24B.
This Dynamite 4.8V, 150 mAh NiMH battery is designed to suit the ECX 1/24 Temper.
This 4 Cell 4.8V NiMH Micro USB Charger is designed to suit the ECX 1/24 scale vehicles.
- Easy to use backlit LCD interface
- 1S-6S Li-Po / 4-12-cell NiMH charging & 2A USB port
- Adjustable charge current from 0.1A to 6A
- Safety and circuit protection
The Prophet™ Precept™ charger is the charging solution for just about any hobbyist. This affordable, durable and full AC/DC powered charger can be utilized for surface, air and marine RC charging purposes. With the ability to handle all popular hobby battery types, including Li-PI/Li-Fe, Ni-MH/Ni-Cd, and Lead Acid, along with a range of selectable currents, the Prophet Precept is an asset to any hobby layout. All of this is backed by a Dynamite 5-year warranty.
This is a replacement E-flite 1S, 3.7V, 0.3A LiPo Charger w/Adapter Jack, and is intended for use with Blade and E-flite micro aircraft. This charger is powered by four AA batteries (not included), but can also be powered by the AC to 6VDC Power Supply (EFLC1005).
- Blade mSR
- Blade mCX/mCX2
- E-flite Ultra-Micro 4-Site
- E-flite UMX Extra 300 3D
- E-flite UMX Carbon Cub SS
- ParkZone Ultra Micro P51D
- ParkZone Ultra-Micro T-28 Trojan
- ParkZone Ultra Micro J-3 Cub
- ParkZone Ultra Micro F4U Corsair
- ParkZone Ultra Micro Mosquito MK VI
- ParkZone Ultra-Micro Spitfire Mk IX
- ParkZone Ember
- ParkZone Vapor
E-Flite 2-3S LiPo Balancing Charger
This 2S 22.2V LiPo balancing charger is used in the Blade 500 and 500 X models.
If you like this charger, you should also check out the E-Flite Ultra Micro-4 Charger.
Description: GT-X4 Quattro 4 output charger AC/DC (240/12V)
Charge current: 0.1-7.0A
Circut power: 100W for charging max (X4), 5W for discharging (X4)
Discharge current drain for Lipo: 300mah
Supports: Lithium cells 1-6s, NiCd/NiMh 1-15 cells, PB voltage 2-20V
Cables: 2 x XT60 charge leads, 2 x Deans charge cables, 4 x long balance cables with XH balance boards.
Adaptor leads: Dean to JST, Dean to Tamiya, Dean to Fut female, Dean to aligator, XT60 to aligator.
Charge modes: Fast/Balance/Storage/Discharge.
GT Power C607D AC/DC 7amp 80w
The G.T. Power C607D charger is a simple yet powerful dual input multifunctional charger with built in LiPo balancing (JST-XH) for up to 6S Lithium batteries.
It is packed with features that exceeds many higher cost units.
Primarily designed for Lithium Polymer (LiPo, Li-Poly) batteries, it can also charge Li-Ion, Li-Fe (A123M1), Ni-Cd, Ni-MH, and Pb (lead acid) batteries.
- Capacity Limit
- Maximum safety
- Temperature monitoring
- Input power monitoring
- Easy to program buttons
- 5 battery memory
- Individual cell monitoring
- 2-Line Back lit LCD display
- Built in Balancer to 6S packs
- Cycle charging/discharging
- Includes FAST & STORAGE Li-xx programs
- Output 80W
- Discharge 5W
- Balancing current 300mAh/cell
- Operating input voltage : 10 - 18V DC or 100-240V AC
- Ni-Cad / Ni-MH : 1 - 15 Cells
- Li-Ion / Li-Po / Li-Fe : 1 - 6 Series
- Charge current : 0.1 - 7.0A
- Discharging current: 0.1 - 1.0A
- PB / Lead Acid : 2 - 20V
- Built in Cell Ballancer : Up to 6S (series) Li-Po (JST-XH connectors)
- No. of Cycles : Up to 5 Cycles
- Weight : 400g
- Dimensions : 136mm x 127mm x 56mm
Includes (see above photo)
1 x Charger
1 x Alligator Clips to DC Cable
1 x Alligator Clips to Dean style connector
1 x Mini JST (red) connector to Dean style connector cable
1 x Female servo connector to Dean style connector cable
1 x Glow plug connector to Dean style connector cable
1 x 4mm banana connectors to Dean style connector cable
1 x Mains kettle lead with AU plug
1 x Manual
This is the Great Planes Electrifly DC Peak Charger
Advanced automatic Peak Detection Circuitry technology
Automatic detection of battery type
Charges 6 to 8** cells, and works with Nickel-Cadmium and Nickel-Metal Hydride battery packs.
Plugs into a car cigarette lighter or auxiliary power receptacle, for charging virtually anywhere, even in transit to the field
Has two Peak Charge rates of 600mAh for larger motor and transmitter batteries, or 200mAh for smaller flight batteries. (see SPECS)
Automatically switches to 15mA TRICKLE Charge after Peak
Pulse Charge current means fliers can Charge smaller batteries without fear of overheating.
Reverse polarity protection with overload fuse
Multi-function Red LED is ON during Fast Charge, and flashes during TRICKLE Charge.
The 2-pin connector offers plug & play simplicity and connects directly into most ElectriFly batteries (Adapters are sold separately for use with transmitters and other batteries
One ElectriFly Peak Charger with 47 wire and 2-pin Female BEC Connector
One instruction sheet
Connecting battery and plugging into 12V accessory socket.
Cells: 6 to 8
Battery Sizes: 50 to 1200mAh (sub-AAA, sub-AA, AAA, AA cells)
Cell Types: Nickel Cadmium and Nickel Metal Hydride
Input Voltage: 11-14V DC
Input Protection: Fused
Charge Rates: 600mAh (larger motor and transmitter batteries) 200mAh (smaller flight batteries)
Trickle Rate: 15mA
Connector: 2-pin Red Female
Polarity: Reverse polarity protected
Overall Length: 4 (101mm)
Width: 1 (25mm)
Height: 3.5 (89mm)
Weight: 1.46oz (41g)
Operating Temperature: 32 to 122°F (0 to 50°C)
8-bit 4MHz CPU with 8k ROM, .5K RAM, 1-channel 16 bit
If the battery is rated at 330mAh or less, set the switch on the face of the charger to 200mA. If the battery is rated at greater than 330mAh, set the switch to 600mA. This charger WILL NOT Charge batteries with fewer than 6 cells.
#111832 - AC MULTI-REGIONAL CHARGER WITH MICRO PLUG
Input: 100-240V/Output 7.5V - 330mA
Genuine HPI spare part for ensured quality, correct maintenance and easy repairs.