Alclad Candy Cobalt Blue ALC-710
Or 4 interest-free payments of $4.50 with Learn more.
In StockThis item ships within 2 business days
WHEN ORDERING THIS PRODUCT, REMEMBER TO SELECT THE DANGEROUS GOODS DELIVERY METHOD AS THIS ITEM IS DANGEROUS GOODS AND MUST BE SHIPPED BY ROAD COURIER.
Rocket Engines, Fuel, Aerosols & Alclad Lacquers..cannot be sent to PO Box addresses so please supply a street address.
Alclad II Lacquer has quickly become the preferred choice of many modellers for Natural Metal Finishes. The quality of Alclad II has led to its diverse use including achitectural models, custom built motorcycles, Hollywood special effects, angling accessories. For use on injection plastic kits a primer is necessary. ...Regular Alclad... is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which Alclad can craze. High-Shine Alclad finishes require a glossy base coat. Preparation and Spraying The surfaces to be painted must be thoroughly clean and free from dust,grease,oil and finger marks. Apply the correct primer for the type of Alclad being used. Alclad should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh. Candy Enamel top coats: Shake thoroughly before use. Do not thin. Apply over Alclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.
Be The First To Review This Product!
Help other Frontline Hobbies users shop smarter by writing reviews for products you have purchased.