UDI 1/16 Breaker 2.4G RTR 4WD Brushless Drift Car

UDI 1/16 Breaker 2.4G RTR 4WD Brushless Drift Car

$179.99

Description

High Bright LED Lights

Controller Headlights
TailLights

Waterproof Electronic Speed Control

Integrated ESC
Real-time telemetry
Electronic Stability Program(gyroscope)
Powered accessory ports

Decoration

PC material bodyshell,high toughness and not easy to deform
Front Bumper
The wheels are also equipped with dummy brake discs integrated hex adapters
4 pcs drift tires
Rear view mirror, Rear wing

Wheels and Tires

Road Racing tires
48mm tires

Suspension

Provides scale looks and authentic off-road dynamics
Front and rear independent suspension damping
High-efficiency metal drive shaft

Steering

17G steering servo
Dual bellcrank design with bearings and integrated servo saver
Solid non-adjustable steering links for rugged durability

Drivetrain

Steel driveshafts
Oil-filled limited slip front differential
Heavy-duty splined front driveshaft
Fixed-length steel rear driveshaft

Sealed Ball Bearing

Hardware with rust-resistant native oxid coating.

Electronic Stability Program

When the trucks driving occurs side slip or out of control,it can timely and effectively correct the car attitude and direction. The function and sensitivity of gyroscope sensor can be adjusted and turn off by the ESP knob of the transmitter.

High Speed Bearings (The Whole Car)

The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball bearings, the friction during power transmission is reduced, the transmission efficiency of mechanical power is improved, and mechanical damage is reduced at the same time.

Planetary differential

High-strength nylon planetary differential (can be upgraded to metal differential), strong and wear-resistant, more stable in curve driving.

Brushless Motor

3900KV brushless motor power system with finned can for better heat dissipation.

Integrated gyroscope waterproof ESC

4CH 2.4G waterproof, Dust-proof design, Electronic Stability Program, Low Voltage Cutoff and Thermal Overload Protection, Brake, BEC, LVC sensitivity, reverse speed settings

Two set of tires

RC High Speed/Drift Car. Equipped with two sets of different tires to suit different reasons and can be replaced freely.

Power Supply

7.4V 1200mAh (8.88Wh) rechargeable Li-Po battery

Car Specs

Model No.: UD1601PRO
Assembly time: Less than half an hour
High Speed Bearings: The whole car
Battery: Include
Remote Control Distance: about 50m
Playing Time: about 15 minutes
Battery capacity: 7.4V, 1200mAh
Charger: Include
Completion Level: Ready-to-run
Differential: Two oil-filled gears
Drivetrain: Four Wheel Drive
Drive Type: Forward/Brake/Reverse
Final drive ratio: 6.05:1
Front wheel track: 3.98 inch(101mm)
Power Type: Electric
Tooth pitch: 0.5 / 0.7 / 1.0MOD
Bauchfreiheit: 0.39 inch(10mm)
Internal gear ratio: 2.8:1.1
Motor type: brushless motor
Gear: 16T
Product Length: 11.81″(300mm)
Product Width: 5.91″(150mm)
Product Height: 3.93″(100mm)
Product Weight: 635.5g
Transmitter: Include
Rear wheel track: 3.98″(101mm)
Receiver: Include
Scale: 1/16
Servo: Include
Speed controller: Include
Spur gear: 38T
Suspension: Independent
Truck type: Road Racing
Wheel base: 6.69″(170mm)

Motor Specs

Type: Brushless Motor
Weight: 58g
Length: 46.5mm
Diameter: 24mm
Connector Type: 3.5mm bullet connectors

What's in the box

Racing Truck with ESC and Motor
User Manual
2.4GHz Transmitter
Maintenance tools
Rechargeable battery
USB Charger

What you'll need

Transmitter’s batteries (4×1.5V, AA battery)

Download user manual

Specifications

Brand UDI RC

Others also bought