Skip to content
Australia's Largest Hobby Retailer

Car

ABSIMA 1/10 Brushless ESC & Motor Combo Thurst BL ABSIMA 1/10 Brushless ESC & Motor Combo Thurst BL
$129.99
Available to order

Description

The Brushless Combo Set Thrust BL ECO 1:10 is primarily aimed for the owners of 1:10 Ready Set vehicles or KIT vehicles that want to make simple adjustments to increase their racer performance. The set includes the brushless high-performance motor with aluminum housing and the matching speed controller. The system is designed without sensor cable, allowing a particularly easy handling. 
 
Complete sensorless brushless set - ready to use.
Including gold-bonded plug system and t-plug battery connection.
 
New Features

  • Programmable (running mode; drag brake force; voltage cut-off; punch; maximum brake force)
  • 50A continuous amp
  • Battery: 4-9 cells NiMH / 2-3S LiPo

Brushless ESC Features:

  • Waterproof 50A ESC incl. cooler
  • Running mode: forward/brake/reverse or forward/reverse (programmable)
  • LiPo cut-off: non-protection / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V (programmable)
  • Overheat protection
  • Peak amps: 300A
  • BEC: 6V / 3A (switch mode)
  • Battery: 4-9 cells NiMH / 2-3S LiPo
  • Motor limit @ 2S: 8T on-road / 11T off-road
  • Motor limit @ 3S: 11T on-road / 14T off-road
  • Drag brake: 0% - 40% (programmable)
  • Start mode: Level 1 soft - Level 4 very aggressive (programmable)
  • Maximum brake force: 25% - 100% (programmable)
  • Motor timing: 18.75 
  • Size: 48,5x38x32 mm
  • Weight incl. cable : 90g

Brushless Motor Features:

  •  3421KV
  • 27.368 RPM/min @ 7.4 Volt
  • 4 Pole
  • Battery type: 4-9 cells NiMH / 2-3S LiPo
  • Size: 540
  • Length: : 52.0mm
  • Ø w/o fins: 36mm
  • Shaft length : 14,5mm
  • Ø shaft : 3,175 mm
  • Weight: : 199g
Absima 1/10 Brushless Motor Thrust BL 10T Absima 1/10 Brushless Motor Thrust BL 10T
$99.99
Available to order
Absima 1/10 Brushless Motor Thrust BL 10T
Absima Brushless ESC A10 80A Thrust 1/10 AB2110001 Absima Brushless ESC A10 80A Thrust 1/10 AB2110001
$109.99
Available to order
Absima Brushless ESC A10 80A Thrust 1/10
Arrowind 80A ESC + 17T 1/8 Brushless Combo AWD-8013 Arrowind 80A ESC + 17T 1/8 Brushless Combo AWD-8013
$129.99
In stock
Arrowind 80A ESC + 17T 1/8 Brushless Combo
Arrowind Brushless Combo 60W Esc + 13T 540 Motor Arrowind Brushless Combo 60W Esc + 13T 540 Motor
$119.99
Available to order
Arrowind Brushless Combo 60W Esc + 13T 540 Motor
Black Magic 4 Poles Combo 60A ESC + 4350KV + Card BM-4PSL-C561 Black Magic 4 Poles Combo 60A ESC + 4350KV + Card BM-4PSL-C561
$169.99
Available to order

Description

Black Magic 1/10 Scale 60A ESC + 4350Kv Brushless Motor / ESC Combo BM-4PSL-C561 
This is a 4 pole 4350kv Brushless motor and 60 Amp Brushless ESC 
Perfect for any 1/10th Scale Car, Truck, or Buggy 
4-10 cell Nimh 
2-3 cell Lipo

Black Magic 4 Poles Combo Motor 4074 2150KV ESC150A BM-4PSL-C7151 Black Magic 4 Poles Combo Motor 4074 2150KV ESC150A BM-4PSL-C7151
$329.00
In stock

Description

Black Magic 4 Poles Combo Motor 4074 2150KV + ESC 150A + Card w/ Waterproof Structure

Black Magic 60A ESC Fitable For 4 Poles SL Motor Black Magic 60A ESC Fitable For 4 Poles SL Motor
$86.99
Available to order
Black Magic 60A ESC Fitable For 4 Poles SL Motor
Hobbywing EZRUN MAX5-V3 200amp 1/5 ESC 3-8s Hobbywing EZRUN MAX5-V3 200amp 1/5 ESC 3-8s
$449.99
Available to order

Description

Hobbywing 30104000 EZRUN MAX5-V3 Brushless WP ESC 1/5 Buggy / Truggy 3-8S Lipo

Specs :
Cont./Peak Current : 200A/1300A
Motor Type : Sensored / Sensorless Brushless Motor (only in sensorless mode)
Applications : 1/5th Touring Car, Buggy, Truggy and Truck
Motor Limit : With 8S LiPo/24S NiMH: KV ≤ 1000 (58110 size motor)
LiPo/NiMH Cells : 9-24S NiMH, 3-8S LiPo
BEC Output : 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan : Powered by the stable BEC voltage of 6V/7.2V
Connectors : Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller).
Size/Weight : 93.35 (L)x 58.12 (W)x 47.81 (H)/342g
Programming Port : FAN /PRG Port

- See more at: http://www.powerhobby.com/hobbywing-30104000-ezrun-max5-v3-brushless-wp-esc-1-5-buggy-truggy-3-8s-lipo.html#sthash.mDKtM4Tb.dpuf

Hobbywing EZRUN MAX6-V3 200amp 1/6 ESC 3-8s Hobbywing EZRUN MAX6-V3 200amp 1/6 ESC 3-8s
$279.99
Available to order
Hobbywing EZRUN MAX6-V3 200amp 1/6 ESC 3-8s
Hobbywing JUSTOCK Club Spec 45Amp ESC Blue Hobbywing JUSTOCK Club Spec 45Amp ESC Blue
$89.99
Available to order

Description

JUSTOCK SPEC Race ESC

1  Specification

1.1 Output: Continuous 45A, burst 260A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
1.3 BEC: 6V@2A linear mode built-in BEC.
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensored and sensorless brushless.
1.6 Cooling Fan: 5V  * Note #1
1.7 Suitable Motor:  
       With 2S Lipo or 4-6 cells NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T 
       With 3S Lipo or 7-9 cells NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T    
1.8 Suitable Car:  
       1/10, 1/12 on-road or off-road SPEC race (Zero timing race).
       1/10 rock crawler pro race.
1.9 Size: 33mm(L) * 28mm(W) * 31mm(H) (Cooling fan height included)
1.10 Weight: 59g (The weight of cooling fan is not included) 
* Note #1: The cooling fan gets its power supply from the built-in BEC. 

HPI 80Amp Brushless ES Flux Rage 1/8 Scale HPI-101712 HPI 80Amp Brushless ES Flux Rage 1/8 Scale HPI-101712
$159.99
In stock

Description

Fit your car or truck with the latest high-power speed controller from the HPI Flux range!

The Flux Rage is a tough 1/8th scale brushless ESC thats designed to take the rigors of rallycross buggy and truggy racing and bashing. Run this speedo to its limits and it just keeps coming back for more! Have a blast with the normal forward/reverse/brake mode or switch it into race mode for maximum power - you can even use this in powerful crawling machines with the forward/reverse only mode for no braking action!

Fully programmable ABS, drag brake, braking force, reverse force, motor timing and punch allows you to totally customize the feel of the Rage to your driving style and needs. You can even use the HPI #101280 programmer to make the adjustments even easier.

A low-voltage cut-off protects the battery pack, and the controller is protected by a thermostat that automatically shuts it down in the case of overheating.

Continuous Current 80A
Burst Current 380A
6-12 cell NiMH or 2-4 cell LiPo
BEC Output 6v/1.5A
Dimensions 47.6 x 54.5 x 37.1mm
Weight: 105g
Sensorless

Three Running modes:
Racing (Forward and Brake only)
Forward, Reverse and Brake
Forward and Reverse (no brake) for rock crawling

Totally programmable
Proportional ABS brake function with 4 steps of brake force adjustment, 8 steps of drag-brake force adjustment, 4 steps of initial brake force adjustment, 4 steps of reverse force adjustment, 8 steps of motor timing adjustment and 9 soft start (punch) mode settings from soft to aggressive.

Multiple protection features:
Low voltage cut off protection for LiPo or NiMH/NiCd battery
Overheat protection for the ESC

Easy programming with only one setup button, and is compatible with the pocket sized #101280 2 in 1 Professional Program Card

This part fits the following kits/parts

  • Trophy Buggy Flux RTR (2.4GHz) 
  • Trophy Truggy Flux RTR (2.4GHz)
HPI ELC-6S Waterproof ESC HPI-113126 HPI ELC-6S Waterproof ESC HPI-113126
$249.99
Available to order

Description

#113126 - ELC-6S WATERPROOF ESC

1/8th scale waterproof sensorless brushless speed control.

When you need to strap in more power for your 1/8th scale vehicle, the HPI ELC-6S should be at the top of your list! Its the ideal speed controller to rely on for any on- or off-road vehicle thats going to be driven hard in all conditions. 

The ELC-6S is perfect for monster trucks, buggies and any other RC vehicle that you may want to drive in the rain, through puddles and anywhere you like. Its fitted with 2 official Deans connectors so you can fit two batteries (1S, 2S or 3S) batteries for massive acceleration, maximum fun and awesome speed! 

Input voltage: MIN 2s LiPo, MAX 6s LiPo
Max continuous amperage: 120A (full throttle continuous operation with cooling airflow)
BEC specifications: User selectable output between 5 and 7 volts
Operating environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes - with lockout
Size: L 47mm (1.86), W 56mm (2.19), H 34mm (1.33)
Weight (without battery connector soldered to ESC): 111.5 g (3.93 oz)

Make sure to rinse off dirt and any corrosive liquids like saltwater after you drive your car or truck, and make sure that other electronics fitted to the vehicle (servo, motor, etc.) are safe to use in wet conditions, or that they are fully enclosed and protected from water and moisture (such as a receiver/battery case). The fan is not water resistant, and we recommend to disconnect the fan from the ESC before driving in wet conditions

HPI Flux EMH-3S Brushless ESC HPI-112851 HPI Flux EMH-3S Brushless ESC HPI-112851
$109.99
In stock
HPI Flux EMH-3S Brushless ESC
HPI Flux Q-Base Brushless ESC HPI-104924 HPI Flux Q-Base Brushless ESC HPI-104924
$209.99
In stock
HPI Flux Q-Base Brushless ESC

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Description

The Brushless Combo Set Thrust BL ECO 1:10 is primarily aimed for the owners of 1:10 Ready Set vehicles or KIT vehicles that want to make simple adjustments to increase their racer performance. The set includes the brushless high-performance motor with aluminum housing and the matching speed controller. The system is designed without sensor cable, allowing a particularly easy handling. 
 
Complete sensorless brushless set - ready to use.
Including gold-bonded plug system and t-plug battery connection.
 
New Features

  • Programmable (running mode; drag brake force; voltage cut-off; punch; maximum brake force)
  • 50A continuous amp
  • Battery: 4-9 cells NiMH / 2-3S LiPo

Brushless ESC Features:

  • Waterproof 50A ESC incl. cooler
  • Running mode: forward/brake/reverse or forward/reverse (programmable)
  • LiPo cut-off: non-protection / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V (programmable)
  • Overheat protection
  • Peak amps: 300A
  • BEC: 6V / 3A (switch mode)
  • Battery: 4-9 cells NiMH / 2-3S LiPo
  • Motor limit @ 2S: 8T on-road / 11T off-road
  • Motor limit @ 3S: 11T on-road / 14T off-road
  • Drag brake: 0% - 40% (programmable)
  • Start mode: Level 1 soft - Level 4 very aggressive (programmable)
  • Maximum brake force: 25% - 100% (programmable)
  • Motor timing: 18.75 
  • Size: 48,5x38x32 mm
  • Weight incl. cable : 90g

Brushless Motor Features:

  •  3421KV
  • 27.368 RPM/min @ 7.4 Volt
  • 4 Pole
  • Battery type: 4-9 cells NiMH / 2-3S LiPo
  • Size: 540
  • Length: : 52.0mm
  • Ø w/o fins: 36mm
  • Shaft length : 14,5mm
  • Ø shaft : 3,175 mm
  • Weight: : 199g
Absima 1/10 Brushless Motor Thrust BL 10T
Absima Brushless ESC A10 80A Thrust 1/10
Arrowind 80A ESC + 17T 1/8 Brushless Combo
Arrowind Brushless Combo 60W Esc + 13T 540 Motor

Description

Black Magic 1/10 Scale 60A ESC + 4350Kv Brushless Motor / ESC Combo BM-4PSL-C561 
This is a 4 pole 4350kv Brushless motor and 60 Amp Brushless ESC 
Perfect for any 1/10th Scale Car, Truck, or Buggy 
4-10 cell Nimh 
2-3 cell Lipo

Description

Black Magic 4 Poles Combo Motor 4074 2150KV + ESC 150A + Card w/ Waterproof Structure

Black Magic 60A ESC Fitable For 4 Poles SL Motor

Description

Hobbywing 30104000 EZRUN MAX5-V3 Brushless WP ESC 1/5 Buggy / Truggy 3-8S Lipo

Specs :
Cont./Peak Current : 200A/1300A
Motor Type : Sensored / Sensorless Brushless Motor (only in sensorless mode)
Applications : 1/5th Touring Car, Buggy, Truggy and Truck
Motor Limit : With 8S LiPo/24S NiMH: KV ≤ 1000 (58110 size motor)
LiPo/NiMH Cells : 9-24S NiMH, 3-8S LiPo
BEC Output : 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan : Powered by the stable BEC voltage of 6V/7.2V
Connectors : Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller).
Size/Weight : 93.35 (L)x 58.12 (W)x 47.81 (H)/342g
Programming Port : FAN /PRG Port

- See more at: http://www.powerhobby.com/hobbywing-30104000-ezrun-max5-v3-brushless-wp-esc-1-5-buggy-truggy-3-8s-lipo.html#sthash.mDKtM4Tb.dpuf

Hobbywing EZRUN MAX6-V3 200amp 1/6 ESC 3-8s

Description

JUSTOCK SPEC Race ESC

1  Specification

1.1 Output: Continuous 45A, burst 260A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
1.3 BEC: 6V@2A linear mode built-in BEC.
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensored and sensorless brushless.
1.6 Cooling Fan: 5V  * Note #1
1.7 Suitable Motor:  
       With 2S Lipo or 4-6 cells NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T 
       With 3S Lipo or 7-9 cells NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T    
1.8 Suitable Car:  
       1/10, 1/12 on-road or off-road SPEC race (Zero timing race).
       1/10 rock crawler pro race.
1.9 Size: 33mm(L) * 28mm(W) * 31mm(H) (Cooling fan height included)
1.10 Weight: 59g (The weight of cooling fan is not included) 
* Note #1: The cooling fan gets its power supply from the built-in BEC. 

Description

Fit your car or truck with the latest high-power speed controller from the HPI Flux range!

The Flux Rage is a tough 1/8th scale brushless ESC thats designed to take the rigors of rallycross buggy and truggy racing and bashing. Run this speedo to its limits and it just keeps coming back for more! Have a blast with the normal forward/reverse/brake mode or switch it into race mode for maximum power - you can even use this in powerful crawling machines with the forward/reverse only mode for no braking action!

Fully programmable ABS, drag brake, braking force, reverse force, motor timing and punch allows you to totally customize the feel of the Rage to your driving style and needs. You can even use the HPI #101280 programmer to make the adjustments even easier.

A low-voltage cut-off protects the battery pack, and the controller is protected by a thermostat that automatically shuts it down in the case of overheating.

Continuous Current 80A
Burst Current 380A
6-12 cell NiMH or 2-4 cell LiPo
BEC Output 6v/1.5A
Dimensions 47.6 x 54.5 x 37.1mm
Weight: 105g
Sensorless

Three Running modes:
Racing (Forward and Brake only)
Forward, Reverse and Brake
Forward and Reverse (no brake) for rock crawling

Totally programmable
Proportional ABS brake function with 4 steps of brake force adjustment, 8 steps of drag-brake force adjustment, 4 steps of initial brake force adjustment, 4 steps of reverse force adjustment, 8 steps of motor timing adjustment and 9 soft start (punch) mode settings from soft to aggressive.

Multiple protection features:
Low voltage cut off protection for LiPo or NiMH/NiCd battery
Overheat protection for the ESC

Easy programming with only one setup button, and is compatible with the pocket sized #101280 2 in 1 Professional Program Card

This part fits the following kits/parts

  • Trophy Buggy Flux RTR (2.4GHz) 
  • Trophy Truggy Flux RTR (2.4GHz)

Description

#113126 - ELC-6S WATERPROOF ESC

1/8th scale waterproof sensorless brushless speed control.

When you need to strap in more power for your 1/8th scale vehicle, the HPI ELC-6S should be at the top of your list! Its the ideal speed controller to rely on for any on- or off-road vehicle thats going to be driven hard in all conditions. 

The ELC-6S is perfect for monster trucks, buggies and any other RC vehicle that you may want to drive in the rain, through puddles and anywhere you like. Its fitted with 2 official Deans connectors so you can fit two batteries (1S, 2S or 3S) batteries for massive acceleration, maximum fun and awesome speed! 

Input voltage: MIN 2s LiPo, MAX 6s LiPo
Max continuous amperage: 120A (full throttle continuous operation with cooling airflow)
BEC specifications: User selectable output between 5 and 7 volts
Operating environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes - with lockout
Size: L 47mm (1.86), W 56mm (2.19), H 34mm (1.33)
Weight (without battery connector soldered to ESC): 111.5 g (3.93 oz)

Make sure to rinse off dirt and any corrosive liquids like saltwater after you drive your car or truck, and make sure that other electronics fitted to the vehicle (servo, motor, etc.) are safe to use in wet conditions, or that they are fully enclosed and protected from water and moisture (such as a receiver/battery case). The fan is not water resistant, and we recommend to disconnect the fan from the ESC before driving in wet conditions

HPI Flux EMH-3S Brushless ESC
HPI Flux Q-Base Brushless ESC