Skip to content
Australia's Largest Hobby Retailer

Air

Alturn USA 70 AMP Brushless ESC - Aircraft Alturn USA 70 AMP Brushless ESC - Aircraft
$69.99
Available to order

70A BRUSHLESS SPEED CONTROL W/ HEAT SINK

Dualsky 10A 2-3S Brushless ESC DSXC1010BA Dualsky 10A 2-3S Brushless ESC DSXC1010BA
$28.99
Available to order

Description

Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)

Smooth and accurate speed control, excellent throttle linearity

Extreme low resistance, super current endurance

XMotorTM optimized timing advance.

High rate (8 KHz) switching (PWM)

Cutoff can be programmed for motor stop or reduced power

Brake/No Brake operation. Stop folding props cold or let fixed props freewheel

Full protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection

3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models

Throttle range can be configured, fully compatible with all market available transmitters

Microprocessor and BEC(Battery Elimination Circuit) use separate voltage regulator IC , with good anti-jamming capability

Programming card is ready! (for easily programming the ESC on field)

 

Dualsky 80A- 2-6S Brushless ESC Dualsky 80A- 2-6S Brushless ESC
$126.99
Available to order
Dualsky 80A- 2-6S Brushless ESC
Dualsky XC 65 Lite ESC 2-6S DSXC65LITE Dualsky XC 65 Lite ESC 2-6S DSXC65LITE
$66.99
Available to order

Description

Overview
The XC-65 Lite from Dualsky is a superb ESC for your RC plane or helicopter; affordable and very easy to operate.
Features
  • Designed to be easy to operate
  • 65 amps of continuous current gives you excellent power and control

The XC-65 Lite from Dualsky is a fantastic ESC for your remote control plane or helicopter. This easy to operate and very affordable speed control is compatible with ProgCARD V2 and gives you 65 amps of max continuous current with 2-6S LiPO capability. Perfect for .50 class aerobatic and EDF models, the XC-65 is an outstanding choice. Order yours today.

Dualsky XC-45-LITE Brushless Speed Control 45A 2-3S DSXC45LITE Dualsky XC-45-LITE Brushless Speed Control 45A 2-3S DSXC45LITE
$34.99
Available to order

Description

The new Dualsky XC45LITE speed control is economically priced and perfect for 2-3S LiPO powered sport models up to 32 size and helicopters up to 450 size.
The Dualsky XC45LITE speed control is compatible with the Dualsky ProgCard V2 and has a burst rating of 60A.
The BEC is rated at 5.2V 3A and will punch this out all day unlike other low priced speed controls.

Dimension - 67 x 25 x 7
Weight - 38g
Max Cont.  Current and Max Cont.Output - 45A 500W
Max Burst Current and Max Burst Output - 60A 666W
BEC / Dissipative Power - 5.2V/3A

E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC EFLA1060B E-Flite 60-Amp Pro Switch-Mode BEC Brushless ESC EFLA1060B
$133.99
Available to order

Features

Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)

5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)

Stronger BEC for support of most 3-axis stabilization systems

Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage

3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage

Finned heat sinks

Programmable motor braking

Safe power-arm mode prevents accidental starts

Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage

Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)

Programmable soft start for helis and airplanes

Auto motor shut down if signal is lost or there is interference

Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors

Utilizes new smaller MOSFET technology to minimize weight

Radio system power on/off switch

Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

The E-flite® 60-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

E-Flite 70A Switch Mode ESC w/ EC5 Connector E-Flite 70A Switch Mode ESC w/ EC5 Connector
$69.99
Available to order

Features

This 70A switch mode ESC from E-Flite comes with an EC5 connector and is designed for their Carbon Z T-28 Trojan.

Great Plane Model 45Amp Silver Series Brushless ESC Great Plane Model 45Amp Silver Series Brushless ESC
$157.99
In stock

Description

Overview

This is the ElectriFly Silver Series 45 amp Brushless Electronic Speed Control. Great for larger high performance airplanes. Delivering 45A of continuous current with a built-in Battery Circuit which can handle 2A, this ESC is simple to use and very affordable.

Features

  • Compatible with NiCd, NiMH and LiPo batteries

  • Auto-detects input volts and sets Low-Voltage cutoff

  • 8.5kHz switching frequency, for good run time and cool operation

  • Pre-installed Universal radio connector* (see Comments below)

  • Pre-installed WS Deans Ultra male connector for battery (see Comments below)

  • Pre-installed gold plated 4mm female bullet connectors for motor

  • High powered switching BEC (Battery Eliminator Circuit) which handles 3 or 4 standard servos

  • Full proportional forward and smooth throttle response with ON/OFF brake

  • Safe Start System** (see details in Comments below)

  • Thermal Protection stops motor when maximum temperature 230°F is reached

Includes

  • One Brushless ElectriFly Silver Series 45A Speed Control with pre-installed receiver connector, battery connector, and motor connectors.

Requirements

  • Mating motor connectors, GPMM3114

  • Mating battery connector, WSDM3000

Specifications

  • Length: 2.76 (70mm)

  • Width: 1.30 (33mm)

  • Height: .39 (10mm)

  • Weight: 1.76oz (50g)

  • Input Voltage: 6-12 cells NiCd/NiMH 2-4 cells LiPo (20V input w/o BEC)

  • Output Current: 45A continuous maximum 50A surge maximum

  • Max Output Power: 500 watts

  • ON-resistance: .008 ohms

  • Operating frequency: 16kHz fixed

  • BEC: 5V/2A

  • Low Voltage Cutoff: Battery voltage x .67

  • Thermal Cutoff: 230°F (110°C)

  • Timing Angle: 20°

  • Brake: ON/OFF

Comments

To use with Old Airtronics Rx, requires adapter: AIRM4400
**Safe Start System: Move throttle stick to full throttle position, then to OFF position, then slowly advance throttle and motor will begin to run.

The Silver Series line of brushless electronic speed controls include many built-in safety features. One such feature COULD POSSIBLY CAUSE THE BRUSHLESS MOTOR TO STOP ROTATING when the transmitters stick is at an extremely low position and/or if rotation of the brushless motor is impeded or obstructed in some way. This is NORMAL, as the ESC is detecting that problem possibly exists with the motor and/or speed control. Rotation of the motor is stopped to protect the speed control from possible damage.

WARNING!! If the ESC and motor have already been armed and the motor has been rotating normally, yet after moving the throttle stick to near minimum the motor suddenly ceases to rotate normally even if the throttle stick is advanced above minimum throttle, DO NOT PLACE YOUR HANDS NEAR THE PROPELLER!! FAILURE TO OBEY THIS WARNING COULD RESULT IN PERSONAL INJURY!! From this point, moving the throttle stick up - even to full throttle might not cause the motor to rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To regain control of the motor, move the throttle stick to absolute minimum throttle position and then advance the throttle stick upwards once again. Alternatively, you can disconnect the battery from the ESC, then re-connect the power source and re-arm the system. NEVER get near the propeller if the speed control is connected to input power! ALWAYS make sure the throttle stick is at minimum position before attempting to disconnect the battery from the speed control!


Great Planes ESC Brushless 25A SS25 GPM-M1820 Great Planes ESC Brushless 25A SS25 GPM-M1820
$128.99
In stock

Description

Overview

This is the ElectriFly Silver Series 25 amp Brushless Electronic Speed Control. Great for medium sized, high performance airplanes. Delivering 25A of continuous current with a built-in Battery Eliminator Circuit which can handle 2A, this ESC is very simple to use and very affordable.

Features

  • Compatible with NiCd, NiMH and LiPo batteries

  • Auto-detects input volts and sets Low-Voltage cutoff

  • 8.5kHz switching frequency, for good run-time and cool operation

  • Pre-installed Universal radio connector* (see Comments below)

  • Pre-installed WS Deans Ultra male connector for battery (see comments below)

  • Pre-installed gold plated 3.5mm female bullet connectors for motor

  • High powered switching BEC (Battery Eliminator Circuit) which handles 3 or 4 standard servos

  • Full proportional forward and smooth throttle response with ON/OFF brake

  • Safe Start System** (see details in Comments below)

  • Thermal Protection stops motor when maximum temperature 230°F is reached

Includes

  • One Brushless ElectriFly Silver Series 25A Speed Control with pre-installed receiver connector, battery connector, and motor connectors.

Requirements

  • Mating motor connectors, GPMM3112

  • Mating battery connector, WSDM3000

Specifications

  • Length: 1.58 (40mm)

  • Width: 1.02 (26mm)

  • Height: .31 (8mm)

  • Weight: .92oz (26g)

  • Input Voltage: 7-12 cells NiCd/NiMH 3-4 cells LiPo (20V input w/o BEC)

  • Output Current: 25A continuous maximum 28A surge maximum

  • Max Output Power: 250 watts

  • ON-resistance: .15 ohms

  • Operating frequency: 8.5kHz

  • BEC: 5V/2A

  • Low Voltage Cutoff: Battery voltage x .67

  • Thermal Cutoff: 230°F (110°C)

  • Timing Angle: 12°

  • Brake: ON/OFF

Comments

To use with Old Airtronics Rx, requires adapter: AIRM4400
**Safe Start System: Move throttle stick to full throttle position, then to OFF position, then slowly advance throttle and motor will begin to run.

The Silver Series line of brushless electronic speed controls include many built-in safety features. One such feature COULD POSSIBLY CAUSE THE BRUSHLESS MOTOR TO STOP ROTATING when the transmitters stick is at an extremely low position and/or if rotation of the brushless motor is impeded or obstructed in some way. This is NORMAL, as the ESC is detecting that problem possibly exists with the motor and/or speed control. Rotation of the motor is stopped to protect the speed control from possible damage.

WARNING!! If the ESC and motor have already been armed and the motor has been rotating normally, yet after moving the throttle stick to near minimum the motor suddenly ceases to rotate normally even if the throttle stick is advanced above minimum throttle, DO NOT PLACE YOUR HANDS NEAR THE PROPELLER!! FAILURE TO OBEY THIS WARNING COULD RESULT IN PERSONAL INJURY!! From this point, moving the throttle stick up - even to full throttle might not cause the motor to rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To regain control of the motor, move the throttle stick to absolute minimum throttle position and then advance the throttle stick upwards once again. Alternatively, you can disconnect the battery from the ESC, then re-connect the power source and re-arm the system. NEVER get near the propeller if the speed control is connected to input power! ALWAYS make sure the throttle stick is at minimum position before attempting to disconnect the battery from the speed control!

SkyMaxx Pro 45 45A 2-6S BEC Servo RCP-SKX-045-SB SkyMaxx Pro 45 45A 2-6S BEC Servo RCP-SKX-045-SB
$79.99
Available to order

Description

Overview

New generation MOSFETs, lower temperature and resistance
• Suitable for all brushless motors, also very high RPM motors
• Suitable for all battery types
• Auto voltage and battery detection
• Secondary sub-menu setting for easy programming
• Adjustable BEC output 5.0V • 5.5V • 6.0V
• Advanced GOVERNOR mode for helicopters
• Selectable motor timing for smoother running motors
• Programmable soft start-ups
• Power arming protection, prevents motor from starting accidently
• Super smooth and accurate throttle linearity
• Auto throttle shut-off in case of signal loss or interference
• Temperature and overload protection
• Advanced programming software
• Firmware upgrade via USBAirplane & Heli controllers

Specifications

BEC 5V - 5.5V - 6V / 5Amp

Current burst 65A

Current continuous 45A

Weight: 58g

Height: 11mm

Length: 56mm

Width: 30mm

Nr of Li-po / Li-fe cells 2 - 6

Nr of Ni-cd / Ni-Mh cells 5 - 18

Brake type OFF - Soft - Medium - Hard

Cut off type Reduce power - Cut-Off power

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

70A BRUSHLESS SPEED CONTROL W/ HEAT SINK

Description

Supported highest motor speed: 210000 RPM(2 poles), 70000 RPM(6 poles), 35000 RPM(12 poles)

Smooth and accurate speed control, excellent throttle linearity

Extreme low resistance, super current endurance

XMotorTM optimized timing advance.

High rate (8 KHz) switching (PWM)

Cutoff can be programmed for motor stop or reduced power

Brake/No Brake operation. Stop folding props cold or let fixed props freewheel

Full protection features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection

3 startup modes: Normal / Soft / Super-Soft startup, can be used for both fixed-wing aircraft or helicopter models

Throttle range can be configured, fully compatible with all market available transmitters

Microprocessor and BEC(Battery Elimination Circuit) use separate voltage regulator IC , with good anti-jamming capability

Programming card is ready! (for easily programming the ESC on field)

 

Dualsky 80A- 2-6S Brushless ESC

Description

Overview
The XC-65 Lite from Dualsky is a superb ESC for your RC plane or helicopter; affordable and very easy to operate.
Features
  • Designed to be easy to operate
  • 65 amps of continuous current gives you excellent power and control

The XC-65 Lite from Dualsky is a fantastic ESC for your remote control plane or helicopter. This easy to operate and very affordable speed control is compatible with ProgCARD V2 and gives you 65 amps of max continuous current with 2-6S LiPO capability. Perfect for .50 class aerobatic and EDF models, the XC-65 is an outstanding choice. Order yours today.

Description

The new Dualsky XC45LITE speed control is economically priced and perfect for 2-3S LiPO powered sport models up to 32 size and helicopters up to 450 size.
The Dualsky XC45LITE speed control is compatible with the Dualsky ProgCard V2 and has a burst rating of 60A.
The BEC is rated at 5.2V 3A and will punch this out all day unlike other low priced speed controls.

Dimension - 67 x 25 x 7
Weight - 38g
Max Cont.  Current and Max Cont.Output - 45A 500W
Max Burst Current and Max Burst Output - 60A 666W
BEC / Dissipative Power - 5.2V/3A

Features

Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)

5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)

Stronger BEC for support of most 3-axis stabilization systems

Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage

3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage

Finned heat sinks

Programmable motor braking

Safe power-arm mode prevents accidental starts

Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage

Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)

Programmable soft start for helis and airplanes

Auto motor shut down if signal is lost or there is interference

Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors

Utilizes new smaller MOSFET technology to minimize weight

Radio system power on/off switch

Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

The E-flite® 60-Amp Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Features

This 70A switch mode ESC from E-Flite comes with an EC5 connector and is designed for their Carbon Z T-28 Trojan.

Description

Overview

This is the ElectriFly Silver Series 45 amp Brushless Electronic Speed Control. Great for larger high performance airplanes. Delivering 45A of continuous current with a built-in Battery Circuit which can handle 2A, this ESC is simple to use and very affordable.

Features

  • Compatible with NiCd, NiMH and LiPo batteries

  • Auto-detects input volts and sets Low-Voltage cutoff

  • 8.5kHz switching frequency, for good run time and cool operation

  • Pre-installed Universal radio connector* (see Comments below)

  • Pre-installed WS Deans Ultra male connector for battery (see Comments below)

  • Pre-installed gold plated 4mm female bullet connectors for motor

  • High powered switching BEC (Battery Eliminator Circuit) which handles 3 or 4 standard servos

  • Full proportional forward and smooth throttle response with ON/OFF brake

  • Safe Start System** (see details in Comments below)

  • Thermal Protection stops motor when maximum temperature 230°F is reached

Includes

  • One Brushless ElectriFly Silver Series 45A Speed Control with pre-installed receiver connector, battery connector, and motor connectors.

Requirements

  • Mating motor connectors, GPMM3114

  • Mating battery connector, WSDM3000

Specifications

  • Length: 2.76 (70mm)

  • Width: 1.30 (33mm)

  • Height: .39 (10mm)

  • Weight: 1.76oz (50g)

  • Input Voltage: 6-12 cells NiCd/NiMH 2-4 cells LiPo (20V input w/o BEC)

  • Output Current: 45A continuous maximum 50A surge maximum

  • Max Output Power: 500 watts

  • ON-resistance: .008 ohms

  • Operating frequency: 16kHz fixed

  • BEC: 5V/2A

  • Low Voltage Cutoff: Battery voltage x .67

  • Thermal Cutoff: 230°F (110°C)

  • Timing Angle: 20°

  • Brake: ON/OFF

Comments

To use with Old Airtronics Rx, requires adapter: AIRM4400
**Safe Start System: Move throttle stick to full throttle position, then to OFF position, then slowly advance throttle and motor will begin to run.

The Silver Series line of brushless electronic speed controls include many built-in safety features. One such feature COULD POSSIBLY CAUSE THE BRUSHLESS MOTOR TO STOP ROTATING when the transmitters stick is at an extremely low position and/or if rotation of the brushless motor is impeded or obstructed in some way. This is NORMAL, as the ESC is detecting that problem possibly exists with the motor and/or speed control. Rotation of the motor is stopped to protect the speed control from possible damage.

WARNING!! If the ESC and motor have already been armed and the motor has been rotating normally, yet after moving the throttle stick to near minimum the motor suddenly ceases to rotate normally even if the throttle stick is advanced above minimum throttle, DO NOT PLACE YOUR HANDS NEAR THE PROPELLER!! FAILURE TO OBEY THIS WARNING COULD RESULT IN PERSONAL INJURY!! From this point, moving the throttle stick up - even to full throttle might not cause the motor to rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To regain control of the motor, move the throttle stick to absolute minimum throttle position and then advance the throttle stick upwards once again. Alternatively, you can disconnect the battery from the ESC, then re-connect the power source and re-arm the system. NEVER get near the propeller if the speed control is connected to input power! ALWAYS make sure the throttle stick is at minimum position before attempting to disconnect the battery from the speed control!


Description

Overview

This is the ElectriFly Silver Series 25 amp Brushless Electronic Speed Control. Great for medium sized, high performance airplanes. Delivering 25A of continuous current with a built-in Battery Eliminator Circuit which can handle 2A, this ESC is very simple to use and very affordable.

Features

  • Compatible with NiCd, NiMH and LiPo batteries

  • Auto-detects input volts and sets Low-Voltage cutoff

  • 8.5kHz switching frequency, for good run-time and cool operation

  • Pre-installed Universal radio connector* (see Comments below)

  • Pre-installed WS Deans Ultra male connector for battery (see comments below)

  • Pre-installed gold plated 3.5mm female bullet connectors for motor

  • High powered switching BEC (Battery Eliminator Circuit) which handles 3 or 4 standard servos

  • Full proportional forward and smooth throttle response with ON/OFF brake

  • Safe Start System** (see details in Comments below)

  • Thermal Protection stops motor when maximum temperature 230°F is reached

Includes

  • One Brushless ElectriFly Silver Series 25A Speed Control with pre-installed receiver connector, battery connector, and motor connectors.

Requirements

  • Mating motor connectors, GPMM3112

  • Mating battery connector, WSDM3000

Specifications

  • Length: 1.58 (40mm)

  • Width: 1.02 (26mm)

  • Height: .31 (8mm)

  • Weight: .92oz (26g)

  • Input Voltage: 7-12 cells NiCd/NiMH 3-4 cells LiPo (20V input w/o BEC)

  • Output Current: 25A continuous maximum 28A surge maximum

  • Max Output Power: 250 watts

  • ON-resistance: .15 ohms

  • Operating frequency: 8.5kHz

  • BEC: 5V/2A

  • Low Voltage Cutoff: Battery voltage x .67

  • Thermal Cutoff: 230°F (110°C)

  • Timing Angle: 12°

  • Brake: ON/OFF

Comments

To use with Old Airtronics Rx, requires adapter: AIRM4400
**Safe Start System: Move throttle stick to full throttle position, then to OFF position, then slowly advance throttle and motor will begin to run.

The Silver Series line of brushless electronic speed controls include many built-in safety features. One such feature COULD POSSIBLY CAUSE THE BRUSHLESS MOTOR TO STOP ROTATING when the transmitters stick is at an extremely low position and/or if rotation of the brushless motor is impeded or obstructed in some way. This is NORMAL, as the ESC is detecting that problem possibly exists with the motor and/or speed control. Rotation of the motor is stopped to protect the speed control from possible damage.

WARNING!! If the ESC and motor have already been armed and the motor has been rotating normally, yet after moving the throttle stick to near minimum the motor suddenly ceases to rotate normally even if the throttle stick is advanced above minimum throttle, DO NOT PLACE YOUR HANDS NEAR THE PROPELLER!! FAILURE TO OBEY THIS WARNING COULD RESULT IN PERSONAL INJURY!! From this point, moving the throttle stick up - even to full throttle might not cause the motor to rotate BUT THE MOTOR IS STILL ARMED AND ACTIVE DURING THIS TIME!! To regain control of the motor, move the throttle stick to absolute minimum throttle position and then advance the throttle stick upwards once again. Alternatively, you can disconnect the battery from the ESC, then re-connect the power source and re-arm the system. NEVER get near the propeller if the speed control is connected to input power! ALWAYS make sure the throttle stick is at minimum position before attempting to disconnect the battery from the speed control!

Description

Overview

New generation MOSFETs, lower temperature and resistance
• Suitable for all brushless motors, also very high RPM motors
• Suitable for all battery types
• Auto voltage and battery detection
• Secondary sub-menu setting for easy programming
• Adjustable BEC output 5.0V • 5.5V • 6.0V
• Advanced GOVERNOR mode for helicopters
• Selectable motor timing for smoother running motors
• Programmable soft start-ups
• Power arming protection, prevents motor from starting accidently
• Super smooth and accurate throttle linearity
• Auto throttle shut-off in case of signal loss or interference
• Temperature and overload protection
• Advanced programming software
• Firmware upgrade via USBAirplane & Heli controllers

Specifications

BEC 5V - 5.5V - 6V / 5Amp

Current burst 65A

Current continuous 45A

Weight: 58g

Height: 11mm

Length: 56mm

Width: 30mm

Nr of Li-po / Li-fe cells 2 - 6

Nr of Ni-cd / Ni-Mh cells 5 - 18

Brake type OFF - Soft - Medium - Hard

Cut off type Reduce power - Cut-Off power