Phoenix Model Scanner RC Plane, .40 Size ARF, PHSCANNER, PHN-PH006

Description

This low wing was designed from the start to handle any kind of aerobatic maneuvers. It loops, rolls, flies inverted, and is capable of many more magical moves. It's a flying cocktail of performance.
All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc).

Features:

Can be flight ready in just 2 to 4 hours
Quality balsa and plywood construction for durable structure
Extremely lightweight laser-cut all-wood construction
95% factory built and covered
Prepainted, preinstalled the cockpit
Almost accessories are included
Can be converted for electric flight

Specifications:

Wingspan: 1444mm (56.8in)
Length: 1168mm (45.9 in)
Flying weight: 2400-2600 gr
Wing area: 35.2 dm2
Wing loading: 70g/dm2
Wing type: Naca airfoils
Covering type: V-kote film
Spinner size: Plastic 58mm (included)
Radio: 4 channel minimum (not included)
Servo: 5 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 throttle (not included)
Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included)
Servo mount: 21mm x 42 mm
Propeller: suit with your engine
Engine: .46-.55 / 2-stroke (not included)
Motor: brushless outrunner 1000-1400 W, 480 KV (not included)
Gravity CG: 70mm (2.7in) Back from the leading edge of the wing, at the fuselage
Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
Experience level: Intermediate
Plane type: Low wing sport

Specifications

Brand

Phoenix