Skip to content
Australia's Largest Hobby Retailer

Electrics

Atlas Connector Electric Accessories ATL0205 Atlas Connector Electric Accessories ATL0205
$19.99
In stock

Description

This Connector is an Electrical Control Device Designed for Layouts of Any Scale by Atlas Model Railroad.

Features:

  • For all scales.
  • SPST.
  • This is a device to turn electrical power ON or OFF to track section or accessories.
  • It has three SPST ON/OFF yellow switches in parallel.
  • Can be coupled together in any number by means of spade lugs (not provided in package).
  • Atlas connector compromises the three single pole, single throw (ON/OFF) switches in one convenient package.
  • The connector provides individual lighting control to accessories such as houses, street lamps, towers, and so on.
  • It controls power to sidings or provides individual power control to several yard tracks.


Includes:

  • One Connector with Screws

 

Atlas Controller Switches ATL0220 Atlas Controller Switches ATL0220
$16.99
In stock

Description

This is a Atlas Model Railroad Switch Controller. This controller is intended for use with HO and N scale trains. This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Features reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc. Couples with #215 Selectors.

Features:

  • The simplest way to wire and control tricky reverse loops, wyes and turntables
  • Includes reversing switches for two mainline cabs plus a switch for directional control on reversing loops
  • Multiple boxes can be coupled together without wiring
Atlas DCC 4 Function Dual Mode Decoder Atlas DCC 4 Function Dual Mode Decoder
$42.99
Temporarily Out of Stock

Description

This decoder allows you to easily switch your locomotive from analog (standard DC power) to digital mode and back again without the typical speed differential. These two function and four function decoders can be easily installed into almost all Atlas locomotives produced over the last 15 years as well as most other locomotives with a motor mounted light board. With the ability to control lights, operations mode programming, speed steps and much more, these decoders are affordable, so you can make your entire fleet DCC ready.

Atlas Electric Snap Relay ATL0200 Atlas Electric Snap Relay ATL0200
$26.99
In stock

Description

This Snap Relay is a very useful Track Arrangement Designed by Atlas Model Railroad.

Features:

  • A double-pole, double-throw electrical switch actuated by a remotely controllable twin-coil, momentary power electromagnet.
  • Control X-sections automatically.
  • It can be installed wherever convenient.
  • Four rail joiners are provided.
  • Detailed instructions with schematic display of snap-relay.
  • It can do all sorts of useful jobs on your layout, some of which are:
    • Power the frogs on Mark 2 Turnouts to eliminate the short dead- spot and prevent stalling of short-wheel-based locos.
    • Power trackside signal lamps to show switch point settings.
    • Feed control panel lamps to show points setting of remotely located turnouts.
    • Selective power control for dead-end sidings with all Atlas turnouts: Mark 2, Custom-Line, or Snap-Switches.
Atlas HO Insulated Rail Joiners (24 Pces) ATL0055 Atlas HO Insulated Rail Joiners (24 Pces) ATL0055
$3.99
In stock

Description

This is a Package of Plastic Rail Joiners for HO Scale Train Track.
Its from the Atlas Model Railroad Company for experienced collectors.

Features:

  • Rail joiners are made of clear plastic, designed to hold HO track together.
  • Plastic pieces are separated by six square sections on the blister pack, 24 joiners in each unit.
  • Sturdy pieces may be used as extras when adding track or replacing other joiners.
  • Quality joiners are precise and dependable.

Requires:

  • Assembly with HO Scale Train Track
  • Sprue Cutter or Hobby Knife
  • Adult Supervision

Keep out of reach from children under the age of 3

Atlas HO Selector Electric Accessories ATL0215 Atlas HO Selector Electric Accessories ATL0215
$19.99
In stock

Description

This is the Atlas Model Railroad Switch Selector, and is intended for use with HO and N scale tracks. This device enables the operation and control of two trains at the same time. It features four single-pole, double-throw switches to provide two-cab operation for four blocks. May be ganged together in any number to control additional blocks without inter-switch wiring. Can be used as area selectors for four-cab operation. Couples with #220 Controller.

Features:

  • Enables the control of two trains at one time
  • Equipped with four single-pole, double-throw switches to provide two cab operation for 4 blocks
  • Multiple boxes can be coupled together without wiring
Atlas HO Turntable Motor ATL0304 Atlas HO Turntable Motor ATL0304
$59.99
In stock

Description

This is an Atlas Model Railroad HO-Scale Turntable Motor Drive Unit, and is intended for use with the Atlas ATL305 Turntable.

Atlas Spade-Tongue Connector 24pce ATL0201 Atlas Spade-Tongue Connector 24pce ATL0201
$9.99
In stock

Description

Package of 24 #3 Spade Connectors

Features:

  • Aluminum connectors (Horseshoe shaped flat piece with single end for placement of wire)
  • Spade Connectors are designed to be used with your terminal sections of railroad track.
Atlas Switch Control Box -point switch ATL0056 Atlas Switch Control Box -point switch ATL0056
$9.99
In stock

Description

This is the Atlas Switch Control Box. Suitable for Ages 8 & Older.

Features:

  • An electrical device which controls the setting of remote switch machines by a momentary burst of power. Merely slide the button to the position desired and depress briefly.
  • Controls Atlas (or other twin coil) switch machines with SPDT momentary action. 
  • Button position indicates turnout setting.
  • Can be coupled together in any number without wiring.
  • Suitable for HO and O scale layouts.
  • Switch identification labels included.
  • Instructions on package.

Includes:

  • 1 Control Box
  • 2 Double-Ended Spades
  • Screws
Atlas Twin Switch Electric ATL0210 Atlas Twin Switch Electric ATL0210
$19.99
In stock

Description

This is the Atlas Model Railroad Twin Switch Controller. This controller is intended for use with both HO and N gauge tracks. This controller features two double-pole, double-throw reversing switches wired in parallel that can be used for reversing sections and turntable control on single-cab layouts, as well as a variety of other applications.

Features:

  • Two double-pole, double-throw reversing switches wired in parallel
  • Useful for reversing section and turntable control on single cab layouts
  • Multiple boxes can be coupled together without wiring
Atlas Under Table Switch Machine ATL065 Atlas Under Table Switch Machine ATL065
$13.99
In stock

Description

This is a Atlas Model Railroad HO/N-Gauge Under Table Switch Machine. This switch machine can be easily hidden beneath your layout so you can throw your switches without being seen. Compatible with all Atlas (and many other) HO and N scale code 80 and code 100 switches.

Features:

  • Works from beneath your layout
  • Can be used with most Atlas (and many other) HO and N switches
Auscision DC Model Railway Controller with Power Pack Auscision DC Model Railway Controller with Power Pack
$63.99
In stock
Illuminated power light Auto recovery circuit breaker Separate accessory wire inputs No pulse power to damage precision motors Spring loaded terminal wire grabs Track wire included
Bachmann E-Z Command 906 Pin DCC Decoder (DC Compatable) BAC-36556RA Bachmann E-Z Command 906 Pin DCC Decoder (DC Compatable) BAC-36556RA
$39.99
In stock

Description

Brand/Manufacturer: Bachmann

Gauge/Scale: Designed for OO/HO Locomotives

Features:

  • 6-Pin, 90 Degree design for use primarily with Graham Farish N gauge 3F Jinty steam locomotives

  • 90 Degree Design

  • 2 Functions @ 150mA

  • 0.75 maximum power output

  • Back EMF

  • Quiet Drive high frequency PVM

  • NMRA Compliant

  • Analogue Compatible

Dimensions: 13.25mm x 11.5mm x 5mm

Bachmann E-Z Command Accessory Decoder BAC-36561 Bachmann E-Z Command Accessory Decoder BAC-36561
$86.99
In stock
Bachmann E-Z Command Accessory Decoder
Bachmann E-Z Command DCC Decoder 8 Pin NMRA Plug BAC-44915 Bachmann E-Z Command DCC Decoder 8 Pin NMRA Plug BAC-44915
$44.99
Temporarily Out of Stock

Description

Introduce your locomotives to the digital age with these basic one-amp decoders. E-Z Command decoders are compatible with NMRA compliant DCC systems. Features include: service mode decoder lock for main line programming, two- or four-digit addresses, advanced consisting and 28/128 speed steps. Decoders can control speed, direction and lighting functions and are offered in two versions with wire harnesses (for hard-wiring) or with eight-pin plug (for DCC-ready, NMRA socket-equipped locomotives).

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Description

This Connector is an Electrical Control Device Designed for Layouts of Any Scale by Atlas Model Railroad.

Features:

  • For all scales.
  • SPST.
  • This is a device to turn electrical power ON or OFF to track section or accessories.
  • It has three SPST ON/OFF yellow switches in parallel.
  • Can be coupled together in any number by means of spade lugs (not provided in package).
  • Atlas connector compromises the three single pole, single throw (ON/OFF) switches in one convenient package.
  • The connector provides individual lighting control to accessories such as houses, street lamps, towers, and so on.
  • It controls power to sidings or provides individual power control to several yard tracks.


Includes:

  • One Connector with Screws

 

Description

This is a Atlas Model Railroad Switch Controller. This controller is intended for use with HO and N scale trains. This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Features reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc. Couples with #215 Selectors.

Features:

  • The simplest way to wire and control tricky reverse loops, wyes and turntables
  • Includes reversing switches for two mainline cabs plus a switch for directional control on reversing loops
  • Multiple boxes can be coupled together without wiring

Description

This decoder allows you to easily switch your locomotive from analog (standard DC power) to digital mode and back again without the typical speed differential. These two function and four function decoders can be easily installed into almost all Atlas locomotives produced over the last 15 years as well as most other locomotives with a motor mounted light board. With the ability to control lights, operations mode programming, speed steps and much more, these decoders are affordable, so you can make your entire fleet DCC ready.

Description

This Snap Relay is a very useful Track Arrangement Designed by Atlas Model Railroad.

Features:

  • A double-pole, double-throw electrical switch actuated by a remotely controllable twin-coil, momentary power electromagnet.
  • Control X-sections automatically.
  • It can be installed wherever convenient.
  • Four rail joiners are provided.
  • Detailed instructions with schematic display of snap-relay.
  • It can do all sorts of useful jobs on your layout, some of which are:
    • Power the frogs on Mark 2 Turnouts to eliminate the short dead- spot and prevent stalling of short-wheel-based locos.
    • Power trackside signal lamps to show switch point settings.
    • Feed control panel lamps to show points setting of remotely located turnouts.
    • Selective power control for dead-end sidings with all Atlas turnouts: Mark 2, Custom-Line, or Snap-Switches.

Description

This is a Package of Plastic Rail Joiners for HO Scale Train Track.
Its from the Atlas Model Railroad Company for experienced collectors.

Features:

  • Rail joiners are made of clear plastic, designed to hold HO track together.
  • Plastic pieces are separated by six square sections on the blister pack, 24 joiners in each unit.
  • Sturdy pieces may be used as extras when adding track or replacing other joiners.
  • Quality joiners are precise and dependable.

Requires:

  • Assembly with HO Scale Train Track
  • Sprue Cutter or Hobby Knife
  • Adult Supervision

Keep out of reach from children under the age of 3

Description

This is the Atlas Model Railroad Switch Selector, and is intended for use with HO and N scale tracks. This device enables the operation and control of two trains at the same time. It features four single-pole, double-throw switches to provide two-cab operation for four blocks. May be ganged together in any number to control additional blocks without inter-switch wiring. Can be used as area selectors for four-cab operation. Couples with #220 Controller.

Features:

  • Enables the control of two trains at one time
  • Equipped with four single-pole, double-throw switches to provide two cab operation for 4 blocks
  • Multiple boxes can be coupled together without wiring

Description

This is an Atlas Model Railroad HO-Scale Turntable Motor Drive Unit, and is intended for use with the Atlas ATL305 Turntable.

Description

Package of 24 #3 Spade Connectors

Features:

  • Aluminum connectors (Horseshoe shaped flat piece with single end for placement of wire)
  • Spade Connectors are designed to be used with your terminal sections of railroad track.

Description

This is the Atlas Switch Control Box. Suitable for Ages 8 & Older.

Features:

  • An electrical device which controls the setting of remote switch machines by a momentary burst of power. Merely slide the button to the position desired and depress briefly.
  • Controls Atlas (or other twin coil) switch machines with SPDT momentary action. 
  • Button position indicates turnout setting.
  • Can be coupled together in any number without wiring.
  • Suitable for HO and O scale layouts.
  • Switch identification labels included.
  • Instructions on package.

Includes:

  • 1 Control Box
  • 2 Double-Ended Spades
  • Screws

Description

This is the Atlas Model Railroad Twin Switch Controller. This controller is intended for use with both HO and N gauge tracks. This controller features two double-pole, double-throw reversing switches wired in parallel that can be used for reversing sections and turntable control on single-cab layouts, as well as a variety of other applications.

Features:

  • Two double-pole, double-throw reversing switches wired in parallel
  • Useful for reversing section and turntable control on single cab layouts
  • Multiple boxes can be coupled together without wiring

Description

This is a Atlas Model Railroad HO/N-Gauge Under Table Switch Machine. This switch machine can be easily hidden beneath your layout so you can throw your switches without being seen. Compatible with all Atlas (and many other) HO and N scale code 80 and code 100 switches.

Features:

  • Works from beneath your layout
  • Can be used with most Atlas (and many other) HO and N switches
Illuminated power light Auto recovery circuit breaker Separate accessory wire inputs No pulse power to damage precision motors Spring loaded terminal wire grabs Track wire included

Description

Brand/Manufacturer: Bachmann

Gauge/Scale: Designed for OO/HO Locomotives

Features:

  • 6-Pin, 90 Degree design for use primarily with Graham Farish N gauge 3F Jinty steam locomotives

  • 90 Degree Design

  • 2 Functions @ 150mA

  • 0.75 maximum power output

  • Back EMF

  • Quiet Drive high frequency PVM

  • NMRA Compliant

  • Analogue Compatible

Dimensions: 13.25mm x 11.5mm x 5mm

Bachmann E-Z Command Accessory Decoder

Description

Introduce your locomotives to the digital age with these basic one-amp decoders. E-Z Command decoders are compatible with NMRA compliant DCC systems. Features include: service mode decoder lock for main line programming, two- or four-digit addresses, advanced consisting and 28/128 speed steps. Decoders can control speed, direction and lighting functions and are offered in two versions with wire harnesses (for hard-wiring) or with eight-pin plug (for DCC-ready, NMRA socket-equipped locomotives).