Designed to Fit Kato ACS64, 4-8-4 FEF. GE4/4 Glacier Express Locomotives
Plug N Play design makes installation quick and easy.
Torque Compensation for smooth as silk operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Reverse for reversing direction of trains Reverse for reversing direction of trains.
14V=/0.55A (550 mA) Controllable DC Power for track feed. 14V~/0.5A ()500mA) constant AC power for lighting, signal and point motors.
This transformer guarantees good running qualities with its multisensible speed controller and definite forwards and backwards control. Automatic overload protection. The controller gives a definite forwards and backwards control and speed
Panel controllers are ideal for creating an integrated control panel, with all controls in one unit, along with point and accessory switches and so on. With the same specifications as many of our cased controllers, panel controllers do not, however, come with integrated transformers. Details of which transformers are required for each controller are listed in the specification
Gaugemasters cased Transformer/Controllers are the most popular style of control in our range. Complete with integrated power supply, simply remove the unit from the box, connect it to your track and plug in to the mains and you will be ready to go. In addition, all of these units carry a lifetime guarantee in the rare event of a fault occurring.
Four Track Transformer/Controller
Mains Transformer - fully cased, plugged and output protected with circuit breakers, these transformers are virtually ready to use straight from the box. All you need to do is connect it to the units you want to power. This unit is also suitable for the CDU (Capacitor Discharge Unit) for 16v applications (Peco/ Hornby/ Seep point motors).
Can be used to power the following
Gaugemasters cased Transformer/Controllers are the most popular style of control in our range. Complete with integrated power supply, simply remove the unit from the box, connect it to your track and plug in to the mains and you will be ready to go.
In addition, all of these units carry a lifetime guarantee in the rare event of a fault occurring.
Twin Track Transformer
Twin Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges, with two accessory outputs.
-Input: Mains (240 volts A.C.) use 3 amp fuse
-Output: 2 x 12v D.C. at 1 amp each controlled
-Accessories: 1 x 16v A.C. at 1 amp uncontrolled
-1 x 12v D.C. at 1 amp uncontrolled
-Measurements: 148mm x 90mm x 125mm deep
Automatically switches polarity in a reverse-loop reversing situation - completely hands free!
Easy 4-wire installation with 5 Amps output capability
Electronic Automatic Twin Track Cleaner for use with all types of controllers. This unit works in the same way as the HF-1, with the facility for a second track. The HF-2 is compatible with the SS-1, SS-2 and SS-3.
Not suitable for use with DCC equipment
Input: 16v AC at a maximum of 1.25 Amps ( Gaugemaster T1
Single Track Hand Held Controller with Feedback* for most small Gauges.
*Feedback controllers create a closed loop between the controller and the locomotive which senses the load in the circuit and constantly adjusts the output. This will maintain the locomotive at an even speed up and down gradients and around curves without altering the regulator of the controller.
High Frequency Lighting Generator. This system provides lighting for locomotives and/or rolling stock, and is operated independently of the locomotive motor control. This means that by fitting a switch into the 16v AC supply the lights can be turned on or off whilst the loco is in motion, or even when stationary.
The HF-3 is compatible with the SS-1 and SS-2, and only
A small unit providing an automatic stop and start facility which only requires one reed switch to be installed. The locomotive decelerates for about 5 seconds after passing the reed switch and stops for approximately 20 seconds as factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable.
Reed switch and magnet