Description

Description

Features

Lightweight laser-cut balsa and plywood construction
High power-to-weight ratio with 3D capability
Fast four-screw and four-pin field assembly
Two-piece, plug-in wings with carbon joiner tube
Ready-to-mount the recommended high-output E-flite® Power 60, 470Kv motor
Large magnetic nose hatch provides ample access to battery and electronics
Independent and simple direct-link servo installation
Steerable tailwheel and quality hardware package
Large control surfaces with double-beveled hinge lines
Genuine Hangar 9® UltraCote® covering
Pre-painted fiberglass cowling and wheel pants
Durable aluminum landing gear with painted finish

The E-flite® Beast 60e ARF biplane embodies everything youd expect from a design created to deliver stunning feats of aerobatic artistry. The full-scale Beast is the brainchild of renowned aircraft restoration expert, Kevin Kimball, who actually collaborated with 3D champ Quique Somenzini on its design. Its dramatic ability to flip, roll and tumble with formidable precision inspired the 100cc Hangar 9® Beast thats widely recognized as a modern classic. For this inaugural 60-sized iteration, the E-flite development team worked closely with Quique to ensure the impressive performance and feel of a larger aircraft came through. Because its been designed specifically with the modern electric pilot in mind, every design element takes full advantage of what potent electric power has to offer including engineered construction thats feather-light. As a result, the Beast 60e is a whole new breed of animal.

Assembly at the field takes just a few minutes and is as simple as installing four screws and four pins. Flight battery replacement is fast too from the magnetic slide-lick top hatch that provides instant access to vital electronics. The recommended E-flite power system was designed around popular and economical 6S Li-Po batteries to provide power you can trust and unlimited performance. So inspired by the agility and presence of the Beast 60e, E-flite engineers developed an even stronger version of the Power 60 brushless motor so that its fierce aerobatic ability could shine through.

What you Need

- 6+ channel transmitter and radio system
- (4) mini servos and (2) standard servos
- 60-size brushless outrunner motor
- Propeller
- 3-inch parabolic (P-51 style) spinner
- 80-amp brushless ESC
- 22.2V 6S 4400-5000mAh 30C LiPo flight batter
- Charger for flight battery
- Pilot figure (optional)

Description

The E-flite® Allusive 2.2 m ARF sailplane is an interesting breed of thermal soaring ship that's both a capable glider and aerobatic sport model. Sleek from nose to tail and tip-to-tip, its wings are a fully-balsa sheeted foam core for a strong structure that naturally maintains airfoil integrity. The removable surfaces of the V-tail are a fully sheeted built-up structure and, like the wings, are covered with Hangar 9® UltraCote® covering in a high-contrast scheme. The ailerons and ruddervators feature film-hinging that's sealed at the factory.

Thanks to a front fuse diameter of 40mm, a broad range of popular brushless outrunner motors like the E-flite Power 15 fits inside and has ample cooling. Just a 3S 2200mAh Li-Po flight pack is required for catching a thermal or grooving around. When equipped with a 4-channel radio with V-tail mix, the Allusive 2.2 m sailplane is the most fun you'll have eluding the end of a great flying day.

Specifications

Wingspan: 87.5 in (2.20 m)
Overall Length: 43.0 in (1.10 m)
Wing Area: 546 sq. in. (35.2 sq. dm.)
Flying Weight: 48 oz (1.40 kg)
Motor Size: Power 15
Radio: 4+ channel radio system with V-tail mixing
Servos: (2) wing servos, (2) mini servos
Trim Scheme Colors: UltraCote White (U870), Pearl Charcoal (U846), Dark Yellow (U889)
CG (center of gravity): 2.5 in (65mm) back from the leading edge at fuselage
Prop Size: 12 x 8 folding
Spinner Size: 1.5 in (40mm)
Speed Control : 40-amp brushless
Recommended Battery: 11.1V 3S 2200mAh 30C LiPo
Flaps: No
Control Throw (Ailerons): 15 degrees up/down
Control Throw (Elevator): 15 degrees up/down
Control Throw (Rudder): 15 degrees right/left
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

Requires

- 4+ channel transmitter and receiver radio system
- (2) mini servos, (2) thin-wing servos
- 15-size brushless outrunner motor
- Folding propeller and spinner with folding blade hub
- 40-amp brushless speed control
- 11.1V 3S 2200mAh LiPo flight battery
- Charger for flight battery

SPITFIRE MK

Item code: BH149.

Glow and EP

SPECIFICATION:

– Wingspan: 1,730 mm (68.11 in).

– Length: 1,520 mm (59.84 in).

– Weight: 4.2 kg (9.24 lbs).

– Wing area: 54.7 dm2.

– Wing loading: 77 g/dm2.

– Servo mount: 42mm x 21mm.

– Wing type: Naca Airfoil.

– Spinner: 95mm.

– Gear type: Electric retract gear, size: (92.2 x 51 x 30.6)mm (not included).

Oleo struts (included).

Parts listing required (not included):

– Radio: 06 channels.

– Servo: 07 servos.

– Engine: 65 – 75 2 strokes; 15 cc Gas.

– Motor: Brushless outrunner 1200-2200W, 650KV.

– Propeller: Suit with your engine.

Recommended Motor and Battery set up (not included):

– Motor: RIMFIRE.60.

– Lipo cell: 6 cells 4,000-5,000mAh.

– Receiver battery: 6V/ 800-1200 mAh.

– ESC: 80A.

OPTION ELECTRIC RETRACT GEAR (NOT INCLUDING).

ONLY INCLUDING OLEO STRUTS.

ALL BALSA – PLY WOOD CONSTRUCTION.

COVERED IN A HEAT-SHRINK FILM WITH PRINTED.